BliTZWOlF BW-BRO Pro Earphones User Manual

BliTZWOlF BW-BRO Pro Earphones User Manual

Product Overview

1. MIC hole

2. Multi—function buttons

3. Low—latency mode switch button

4. Low latency status indicator

5. Pairing status indicator, charging indicator

6. Volume + / Previous song

7. Volume —/Next song
   

8. 3.5MM audio interface (sound output)

9. Charging input interface (Micro USB DC5V)

Function operation

1. Turn on/off (the interval between on/off should be greater than 3 seconds) Long press the multi-function button for 3 seconds to turn on/off.

2. Automatic shutdown function When the device is not connected, it will automatically shut down after 10 minutes and needs to be restarted to wake up.

3. Clear the pairing function In the shutdown state, long press the multi-function button for 6S, the “LL” red light flashes, and the paired device information is cleared.

4. Low latency mode In connection and use, if you need to enter the low-latency mode, please click the “LL” button, the green light below the button will light up, and the product will enter the low-latency mode.
   Note:
   

5. Only when the product is connected can it enter the low-latency mode.

6. “LL” key can be switched between normal mode and low delay mode.

7. Music playback During music playback, short press the multi—function button to realize pause and playback functions. Short press the “+” button to realize the volume increase function. Short press the “—” button to realize the volume reduction function. Long press the “+” button to switch to the previous song. Long press the “—” button to switch to the next song.

8. Call function When a call comes in, short press the multi—function button to answer the call. During a call, short press the multi—function button to hang up. When a call comes in, press and hold the multi—function button for 1 second to reject the call.
   Note: To ensure the quality of the call, please talk as close to the MIC hole as possible.

This product can transfer bluetooth music on mobile phones, computers, PADs through the Bluetooth receiving function of this device, and transfer music to wired headsets, and to devices such as cars or stereos with AUX audio input interfaces.

Pairing steps

Press and hold the multi-function button on the device for 3 seconds, the indicator will light up and the device will turn on. The blue indicator light under the device flashes quickly, and the device enters the Bluetooth pairing state.
The 3.5MM audio cable is used, one end is plugged into the AUX port on the device, and the other end of the audio cable is plugged into the audio input port on the audio device or car stereo.
D. Turn on the Bluetooth function of the mobile phone, click Search Bluetooth device, select and connect the device.

“BW—BRO PRO” in the Bluetooth list. E. After a successful connection, the blue indicator light below the device flashes slowly.

Specifications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>