BlitzWolf® BW-WA2 20W Wireless bluetooth Speaker Dual Passive Diaphragm User Guide

: June 4, 2024
: Blitzwolf

Table of Contents

BlitzWolf

BlitzWolf

BlitzWolf® BW-WA2 20W Wireless Bluetooth Speaker Dual Passive Diaphragm

Specifications

BRAND: BlitzWolf®
MODEL: BW-WA2
COLOR: Black
MATERIAL: ABS & PVC & Knit Fabric
NET WEIGHT (G): 530g
DIMENSIONS (CM/ INCH): L200W68H76MM
CONNECTIVITY: bluetooth/ AUX-IN/ U disk
BLUETOOTH CHIP: Action ATS2819
BLUETOOTH VERSION: V4.1
TRANSMISSION DISTANCE: 10m
OUTPUT POWER: 10W*2
INPUT VOLTAGE: DC5.0V
CHARGING INPUT: 500MA-1A
BATTERY CAPACITY: 4000mAh
CHARGING TIME (H): 4-5gh
WORKING TIME (H): 4.5h(100% volume), 7h(50% volume)
AUTOMATIC POWER OFF TIME: Pause/No signal 10 minutes late
CERTIFICATIONS: FCC, CE, ROHS

Introduction

It has Dual passive diaphragms to simultaneously produce sound High pitch is louder, and the bass is deeper. It contains True wireless Bluetooth playback for the left and right channels separated by two BW-WA2 speakers is made possible by the TWS function when two BW-WA2 speakers are paired. It has A 4000mAh emergency power bank with a U disc slot for adding more tunes and an AUX cord for connecting to other non-Bluetooth audio devices are also included. You can effortlessly answer the little portable speaker anywhere with its built-in microphone and hands-free capabilities.

When the smart phone is closed to the speaker while it is in the ON state, the speaker will remember to connect the last time it was used. You can Easily tuck away in your backpack, the portable outdoor Bluetooth wireless speaker allows you to listen to music when bicycling, camping, or climbing.

WHAT’S IN THE BOX

1* BlitzWolf® BW-WA2 20W Wireless bluetooth Speaker
1* 3.5mm Audio Cable
1* USB Charging Cable
1* Manual

HOW TO CONNECT

Choose one of the speakers. To enter TWS status, double-click “power” on your keyboard. The LED indicator light on any speaker will remain yellow after a successful pair, while the other speaker will blink blue. On your device, look for BW-WA4, choose it, and connect.

HOW TO MAINTAIN

The most crucial thing to keep in mind is not to clean your wireless Bluetooth speaker with water. Liquids can enter the internal components of the wireless Bluetooth speaker and hurt them. To remove dirt and other debris, a straightforward cloth will work well.

HOW TO FIX A BLUETOOTH SPEAKER THAT WON’T TURN ON

Check to see if your speaker has enough power.
Make sure the USB AC adapter is firmly (not loosely) attached to the speaker and the wall outlet.
Hold down the power button while waiting for the speaker to start up.

HOW TO AMPLIFY

Generally speaking, people can connect numerous speakers in the same space, which will obviously produce greater sound. Setting the speaker in or near a corner, though, is another technique to increase the volume of the sound. Of fact, this can increase the volume in the space by 40%.

Frequently Asked Questions

How do BlitzWolf Speakers perform?

That description definitely applies to the BlitzWolf. It frequently serves as a reliable indicator of strong speaker drivers and a sizable battery concealed inside. Overall, I think this speaker’s build quality and design are good.

How does a Bluetooth speaker know when it is fully charged?

If the battery is fully charged, the CHARGE indicator won’t turn on. Depending on the model, the speaker’s CHARGE indication could not turn on while it is being charged. The CHARGE indicator will turn on if the battery is charging while the speaker is off.

What does a speaker’s TWS mode do?

You may enjoy full stereo sound quality without the necessity of cables or wires thanks to a special Bluetooth function known as True Wireless Stereo (TWS). This is how TWS operates: You connect your favorite Bluetooth music source to a primary Bluetooth speaker.

Could a Bluetooth speaker be overcharged?

Modern batteries have sophisticated sensors that prevent overcharging, but this does not guarantee that leaving the battery hooked into the charger won’t harm it. One charging cycle is finished when a battery is fully charged; a battery can only be fully charged a certain number of times before it is irreparably harmed.

My Bluetooth speaker is charging, but can I use it?

Yes. Without endangering the battery, you can use your Bluetooth speaker while it is charging. When using the speaker for the first time, you should fully charge it while it is off so that you may check the battery life.

How much time should I give my Bluetooth speaker its initial charge?

For the best results, connect your audio device into an outlet and turn it on at least five minutes before using to give it time to fully charge.

How long does a Bluetooth speaker last?

The Bluetooth speaker’s battery life varies based on the model and the company who made it. A speaker should typically operate for ten to twenty hours after a full charge. A full charge may only be good for a few hours of use on smaller Bluetooth speakers.

Why does my Bluetooth speaker continue to beep?

This occurs as a result of a low battery warning, a device connection, or when charging is finished. Depending on the state of your Bluetooth speaker, the frequency, tone, and intensity of the beeping sounds will change.

Why does the battery on my speaker deplete so quickly?

Additionally, if the battery life of your Bluetooth speaker is depleting quickly and it isn’t because you’re listening to music at its loudest volume, there may be a problem with how much power the Bluetooth speaker requires generally. Simply said, some speakers are not made to be effective.

How long should a Bluetooth speaker be charged?

The Bluetooth® speaker’s internal battery needs three (3) hours to fully recharge from a dead battery.