BliTZWOlF BW-KB3 81 Keys Hot Swappable Mechanical Keyboard User Manual
- June 4, 2024
- Blitzwolf
Table of Contents
PANTONE 7479C
BW-KB3 81
Keys Hot Swappable Mechanical Keyboard
User Manual
BW-KB3 81 Keys Hot Swappable Mechanical Keyboard
MADE IN CHINA
Product Characteristics
| Product Model | BW-KB3 |
|---|---|
| Layout | 81 keys |
| Connection Mode | Bluetooth/Wired/2.4G |
| Keycap | PBT |
| Switch | Gateron G yellow pro |
| Battery Capacity | 3000mAh |
| Hot Swappable | 3pin/5pin |
| Support System | Window7/8/10/11, Mac, Linx |
| Product Size | 32513538mm |
Description of FN+Multi-functional Keys
| FN+1! 2@ 3# | Capable of customizing three groups of game light effects |
|---|---|
| FN+1! | Default FPS mode — W/A/S/D/ I / 1. /4-/-> |
| FN+2@ | Default LOL mode — Q/W/E/R/D/G/F/B/V/L-Ctrl/L-Alt/ Tab/Space/1-6/Esc |
| FN+3# | Default 37-key office mode: A-Z 26 English letters / [/] 1;17.1,/11 I / |
1 /4-/-4
FN+.-| Video recording of the light effect of the above three game modes/Save
the light mode, during video recording, pressing the key once indicates one
color. Respectively, they are red, orange, yellow, green, blue, purple, white,
and out
FN+1 1 <–>| N+ I : light brightness+ (five levels) the brightest by default
FN+ 1: light brightness- (five levels)
FN+4-: dynamic light direction switching
FN+-0: switching backlight colors
FN+\I| Light effect switching, 18 light effect cycles in turn: light wave
(factory default) – kaleidoscope – circular Wave – normally on – follow –
single point light out – breath – neon – dazzling – meteor – raindrop – linear
wave – ripple -Laser – polymerization – positive metaphysical wave -falling
rain – serpentine
---|---
FN+”-_”| Light speed – (five levels) Level 3 by default
FN+”=+”| Light speed+ (five levels)
FN+X| Off/Activate keyboard light, light on by default
FN+space button| Long press it for 3 to 5 seconds, and the keyboard light
flashes 3 times. Clear the light effect and restore to the factory settings
FN+F1| Media player
---|---
FN+F2| Volume –
FN+F3| Volume +
FN+F4| Mute
FN+F5| Player stops playing
FN+F6| Previous
FN+F7| Play/Pause
FN+F8| Next
FN+F9| Email
FN+F1 0| Browser
---|---
FN+F1 1| My computer
FN+F1 2| Calculator
FN+WIN key-L| Lock the WIN button, and then press to unlocking
FN+HOME| Insert
FN+DEL| End
FN+PGUP| Screenshot
FN+PGDN| Pause
Operation Instruction for the Connection Mode
| USB | Switch to the cable mode |
|---|---|
| 2.4G | Switch to the 2.4G mode. After switching, the receiver can be used by |
inserting it into the computer (the status of the device indicator is white
after the connection is successful). For code length, press the FN+R
combination key for 3 seconds, and the device indicator light flashes quickly.
After code matching is successful, the device indicator light stops flashing.
Remarks: The factory keyboard and receiver have been paired successfully.
BT| Bluetooth mode supports the control and storage of three Bluetooth
devices. Select and call among the three Bluetooth devices that have been
paired successfully through FN+Q, FN+W, and FN+E. When switching the paired
devices, the device indicator flashes slowly to enter the back connection
state, and when the switching is successful, the backlight flashes to restore
the state.) When the keyboard is switched to Bluetooth mode, the keyboard
device indicator starts to flash back to connect slowly, and the device
indicator flashes quickly to enter the pairing when the Bluetooth code is
matched. Bluetooth device 1 is connected successfully, the device indicator
light is always red, Bluetooth device 2 is connected successfully, the device
indicator light is normally on the green, Bluetooth device 3 is connected
successfully, and the device indicator light is normally on blue.
Bluetooth pairing name: Blitzwolf–3 3 3.0/ Blitzwof-3 5.0
Description of Knob Switch in the Upper Right Corner
Knob pressed down: Mute
The knob turned to the right. Volume+
The knob turned to the left: Volume-
Description of the Indicator
- Case indicator (blue)
- Charging indicator (red color when it is being charged, and green color after it has been fully charged)
- Device indicator (red indicator on for Bluetooth device 1, blue indicator on for Bluetooth device 2, 2.4G white light)
Note: Description of charging low–power indicator: in low power mode, the
white light of the FN key flashes, the charging indicator light in the lower
right corner is red during charging, and the charging indicator light is green
after it is fully charged }
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communi cations. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures.
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
Operation is subject to the following three conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Warning Statement: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment. This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The device has been evaluated to meet the general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>