BlitzWolf Wireless Earbuds, Dual Dynamic Driver Bluetooth Earbuds-Complete Features/Instruction Guide

BlitzWolf Wireless Earbuds, Dual Dynamic Driver Bluetooth Earbuds

Specifications

• WEARING TYPE: In-ear
• MATERIAL: ABS+ PC
• NET WEIGHT (G): 70g
• DIMENSIONS: 5.74.15.5cm
• ENGLISH VOICE PROMPT: Power on/pairing/connecting/battery low/power off
• BLUETOOTH CHIP: QCC3020
• BLUETOOTH VERSION : V5.0
• SUPPORTED AUDIO DECODING : Apt-XM/ AAC/ SBC
• SUPPORTED PROFILES : HSP/HFP/A2DP/AVRCP
• TRANSMISSION DISTANCE : >10m
• RATED POWER : 3mW
• RECEIVE SENSITIVITY : 97dB
• IMPEDANCE : 16Ω
• FREQUENCY RESPONSE : 20-20kHz
• WATERPROOF : IPX5
• TIME IN CHARGING THE EARBUDS: 1-2H
• TIME IN CHARGING THE BATTERY CASE: 2H
• TALKING TIME (H) : 4h
• MONAURAL EARBUD WITH FULL ELECTRICITY: 5H
• CONSUMING ALL THE ELECTRICITY OF THE CHARGING BOX: Up to 18H
• THE CHARGING BOX CHARGES THE EARPHONES : 3-4times
• STANDBY TIME (H) : 400h

Introduction

BlitzWolf BW-FYE8 is a wonderful option if you’re looking for a low-cost wireless headphone. The QCC3020 Bluetooth 5.0 chip, graphene-coated SSDs, and apt-XM, AAC, and SBC audio codecs are all supported by the BW-FYE8. The QCC DSP and CVCM 8.0 technologies work in tandem to provide richer audio streaming and better hands-free calling. Two 6mm dynamic drivers are used. Enjoy high- fidelity stereo and comprehensive acoustics. All functionalities may be activated with simply a tap on the earphone thanks to intuitive touch control. Dual-channel synchronous transmission: Pairs quickly with your smartphone and produces low-latency sound while gaming or viewing the video.

HOW TO USE

Pairing in Stereo

• Remove both earphones from the charging case. The earbuds will turn on automatically.
• The right earbud, designated as “BW-FYE4”, is the one with which you should link your smartphone for stereo sound. Pair to “BW-FYE8” after activating Bluetooth mode on your device and searching for nearby devices.

HOW TO RESET

Repeat pressing and holding the multifunction touch button on both earbuds until you hear Blitzwolf’s audible tone. One last time, press and hold the multifunction touch button on both earbuds for 15 to 20 seconds. The resetting will then be completed.

Frequently Asked Questions

• How do I get in touch with Blitzwolf?
  It’s as simple as holding down the button until the LED blinks to pair the remote. Select “BW-BS10” from the list of available devices and you’re ready to go. When you hit the shutter button, it will imitate the shutter button or access the camera app.

• What is an MFB key, exactly?
  The mfb stands for multi-function button, which can be used to take calls, play or pause an audio track, and launch a voice command. The arrow on the front right side plays the next audio track, while the arrow on the back right side allows you to restart or go back to the previous track!

• In Bluetooth headphones, where is the MFB button?
  Before turning on the earbuds, make sure your Bluetooth device is turned on. If pairing fails, first turn off the earbuds, then press and hold the MFB button on the left earbud until the indicator on the left earbud alternates between red and blue and the earbud enters pairing mode.

• How do you activate your earbuds?
  Select the headphones from the list. Pull down the shade from the top of your Android device and long-press the Bluetooth symbol. It will immediately take you to the Bluetooth menu, where you may switch it on and then search for devices. Select the headphones you want to pair by tapping their name.

• How is the Blitzwolf bs10 charged?
  The remote does not require batteries; instead, it comes with a short micro-USB connection for charging (located next to the button) — the battery life is rated at 20,000+ photos.

• What is the best way to charge Bluetooth earphones?
  Use an appropriate charger. Bluetooth headsets usually come with their own charger.
  When charging, make sure all the plugs are in place.
  Charge in the charging box or on the base.
  Make sure your Bluetooth headset is charged.
  When charging, do not use the headset.

• What is the procedure for turning off the light on my Bluetooth headphones?
  Put the headphones in pairing mode (flashing red and blue) and then push the volume down button to turn off the flashing LED indicator light. After that, turn the headphones off, then on, and connect them to your device in the usual way.

• What is the procedure for turning off Bluetooth earbuds?
  For many seconds, press and hold the main button on the Bluetooth headset. After a few seconds, an LED light will begin to blink on and off, and your Bluetooth headset will briefly turn off. If your Bluetooth headset still won’t turn off, consult the manual for model-specific instructions.

• How can I tell whether my wireless earbuds are fully charged?
  When your earbuds are plugged in and charging, the charging case will blink red. The LED will stop flashing and become solid red once fully charged.

• On wireless earbuds, where is the power button?
  Place the earphones in the charging case and push the power button on the front of the case to charge them.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>