BliTZWOlF BW-KB2 87-Key Optical Hot Swap Keyboard with Superior Gateron Switch User Manual
- June 5, 2024
- Blitzwolf
Table of Contents
BW-KB2 87-Key Optical Hot-Swap Keyboard with Superior Gateron Switch
User Manual
Connect via USB Cable Paramaters
| model | BW-KB2 |
|---|---|
| layout | 87 keys |
| Operating Voltage | 5V |
| Operating temperature | -40°C-85°C |
| Built-in program | Built-in 48MHz crystal oscillator |
| --- | --- |
| Core MCU | ARM COTEX-MO |
| working frequency | 32K FLASH, 8K SRAM burn more than 100,000 times |
| compatible | WIN2000/WINXP/VISTA/WIN7/WIN8/WIN10/LINUX/ANDROID/10S Wait for the |
operating system.
Power consumption of the whole machine| 50mA–500mA
Function keys
3. Function keys|
---|---
FN + F1| player
FN + F2| Volume down
FN + F3| Volume up
FN + F4| Mute
FN + F5| stop
FN + F6| previous piece
FN + F7| play / Pause
FN + F8| next track
FN + F9| mail
FN + F10| Home page
FN + F11| Calculator
---|---
FN + F12| Macro recording
FN + ESC| Restore Factory
Lighting Settings
| FN + Ins | 7 modes of global light |
|---|---|
| FN + Del | Interactive lighting 5 modes |
| FN + PRINT | Light color full color |
| FN + SCR | Color foreground |
| FN + Pause | Background color |
| FN + Up/down arrow keys | Keyboard 5-level light brightness adjustment |
(flashing function indicates three times at the highest or lowest time)
FN + Left/right arrow keys| Keyboard 5-level light speed adjustment (flashing
function indicates three times at the highest or lowest level)
---|---
FN + HOME| The keyboard light direction is cyclically switched
5. Light recording function FN + END
| FN + PGUP | default: W\A\D\S\—>\<—\ \ |
|---|---|
| FN + PGDN | default: Q\W\E\R\T\Y\U\1\0\P\N\A\S\D\F\G\H\- J\K\L\; |
V\Z\X\CW\B\N\M\,\.\?
Operation description:
When pressing FN+END, the two buttons PGUP\PGDN flash white light, and select any one of them to record. Press the record button repeated!’ to red-orange- yellow-green-cyan-blue-purple-white- After confirming the color to be recorded, press FN+END again to save. (After entering the recording, it is detected ( that no buttons are pressed in 10S, automatically save and exit)
6. Stand—alone macro lighting recording FN + F12
| FN + F12 After entering the macro recording function, the five macro
definition keys Y\U\I\O\P flash. At this time, you can select any group
---|---
Macro recording| to enter the recording. Each group can only record 16 keys at
most.
| After the recording is completed, press FN+F12 Save the recording, and exit.
(After entering the recording, it is detected that no buttons are pressed for
10 seconds, automatically save and exit).
| After FN+Y is enabled, the five keys Y\U\1\0\P are always on in white.
| At this time, you can press the macro key to be played separately
Macro playback| (pressing the macro key that has not been recorded will be the
original playback key). Key-value), press FN+Y again to turn off the macro
enable.