BliTZWOLF BW-CML1 Computer Monitor Light User Manual
- June 6, 2024
- Blitzwolf
Table of Contents
BW-CML1 Computer Monitor Light
User Manual
Overview
Brightness and color temperature adjustable:
- Brightness
- Switch button
- Input
- Adjust the color temperature
- Brightness-
- Output Installation Steps:
Step 1. Insert the rigid bar into the supporting holder, the holder Is
suggested to be put In the middle of the bar: and the USB cable should run
through the holder center.
Step 2 Adjust the size of the holder according to the thickness of the
monitor(the thickness from lcm to 3.5cm ), the holder is suggested to be put
right above the monitor.
Step 3. After installation of bar and holder,hx the USB cable and put the
dinner to the right place where you can dim it easily.
Step 4. Connect the bar to the DC5V USB port, if power on, press the on/off on
the dimmer, the bar could work normally. By adjusting the bar position and
dimmer, we could get our most ideal lighting effect.
Installation effect diagram: Attentions
- In the process of installation and use, do not break cr tend the light strip vigorously to avoid deformation or breakage of the lamp.
- Make sure that the 1158 adapter power is DC5V and the rated current should be higher than IA.
- This computer monitor light has a complex structure, so please do not disassemble it by yourself to avoid damage and irreparable damage.
Parameters
| Name | Computer Monitor Light |
|---|---|
| Voltage | DC5V ( USB Connector ) |
| Light Source | SMD 3014 |
| Light Color Temperature | Warm white/Natural white/Pure white |
| Maximum Power | 5W |
| Shell Material | Aluminum alloy and ABS holder |
| Item Dimensions | 400mm |
| Net Weight | 298g |
EC REP SCHEUFER Technologies GmbH Address: Hertleinstrasse 37, 91052,
Erlangen, Germany E-mail:
Mark.Zhang@scheufer.com
UK REP VITEC UK Co., Ltd Address: Unit G25 Waterfront Studios, 1
DockRoad, London, E16 1AH E-mail: Vincent.feng@vish-
tec.com