BliTZWOlF BW-CF1 Rotation Car Air Vent Auto Memory Lock Mobile Phone Holder Stand User Manual
- June 6, 2024
- Blitzwolf
Table of Contents
BliTZWOlF BW-CF1 Rotation Car Air Vent Auto Memory Lock Mobile Phone
Holder Stand
Installation Steps
- Clamp the ball head to a suitable position of the air outlet.
- Remove the fixed nut and insert the ball head.
- Align the round hole on the back of the car holder with the ball head and push it.
- After tightening the nut clockwise, the angle of the gravity vehicle bracket can be adjusted.
- Place the mobile phone on the car holder, and press the left and right clamping arms until the mobile phone is fully clamped.
- As shown in the figure, lightly press the left or right arm switch to remove the phone.
- For subsequent use, you only need to recommend the phone to the middle of the bracket.
- When changing mobile phones of different sizes, just press the release button to open the clamp arm and adjust the clamp arm again.
Specifications
Clamp the ball head to a suitable position of the air outlet.
| Model | BW-CF1 |
|---|
Colour
installation Locution
| Black
Air Outlet
installation Method
Material
| Clip-in
ABS, Aluminum Alloy, Silica Gel
Item Size| 87.8*52.6″39.Brrrn
Clamping Size| 66~90rrrn
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>