KOHLER K-5713 Drop in Bath Owner’s Manual
- August 11, 2024
- Kohler
Table of Contents
KOHLER K-5713 Drop in Bath
Specifications
- Product: 59-3/4 x 35-3/4 Drop-In Bath K-5713
- Material: Not specified
- Weight: 85 lbs (38.6 kg)
- Water Depth: 16-5/16″ (415 mm)
- Water Capacity: 72.017 gal (272.6 L)
- Drain Location: Center
- Basin Area, Bottom: 43 x 25-5/8 (1093 mm x 651 mm)
- Basin Area, Top: 55-9/16 x 28-3/8 (1411 mm x 720 mm)
Product Usage Instructions
Installation
- Measure your actual product for rough-in details before installation.
- Install the product according to the provided installation instructions.
- The hot water supply should be at least 70% of the bath capacity or greater.
Required Products/Accessories
- K-7271 Brass Slotted Overflow Bath Drain or K-7272 PVC Slotted Overflow Bath Drain (sold separately)
Recommended Products/Accessories
- K-814 Under-Mount Installation Kit
- K-23726 Drain Treatment
- K-23732 Tub & Shower Cleaner
- K-31797 Slotted Overflow Bath Drain Kit
- K-31795 Slotted Overflow Above-the-Floor Bath Drain Kit
Notes
- Kit is required for under-mount installations (sold separately).
- Consult local and national codes for minimum air gap requirements if installing a spout on the faucet deck.
FAQ
-
Q: What is the water capacity of the bath?
A: The water capacity is 72.017 gallons (272.6 liters). -
Q: What are the recommended drain options for this bath?
A: The recommended drain options are K-7271 Brass Slotted Overflow Bath Drain or K-7272 PVC Slotted Overflow Bath Drain.
Features
- Integral lumbar support
- Oval basin creates a spacious bathing experience
- Slotted overflow allows for deep soaking
Material
- Acrylic
Installation
- Requires K-7271 or K-7272 Clearflo slotted overflow bath drain (sold separately)
- Center drain
- Drop-in or undermount
Required Products/Accessories
K-7271 Brass Slotted Overflow Bath Drain
or
K-7272 PVC Slotted Overflow Bath Drain
Recommended Products/Accessories
K-814 Under-Mount Installation Kit
K-23726 Drain treatment
K-23732 Tub & shower cleaner
K-31797 Slotted overflow bath drain kit
K-31795 Slotted overflow above-the-floor bath drain kit
Codes/Standards
CSA B45.5/IAPMO Z124
ASTM E162
ASTM E662
IAPMO Certification
KOHLER® Plastic Baths and Receptors Lifetime Limited Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
| Color | Code | Description |
|---|---|---|
| __ | 0 | White |
| 96 | Biscuit | |
| NY | Dune | |
| 95 | Ice™ Grey | |
| 58 | Thunder™ Grey | |
| 7 | Black Black™ |
Technical Information
All product dimensions are nominal.
- Drain location: Center
- Basin area, bottom: 43″ x 25-5/8″ (1093 mm x 651 mm)
- Basin area, top: 55-9/16″ x 28-3/8″ (1411 mm x 720 mm)
- Weight: 85 lbs (38.6 kg)
- Minimum floor load: 45.8 lbs/ft² (223.6 kg/m²)
- Water depth: 16-5/16″ (415 mm)
- Water capacity: 72.017 gal (272.6 L)
- Template: Drop-in, 1268438-7, required, included
Notes
Measure your actual product for rough-in details.
Install this product according to the installation instructions.
The hot water supply should be 70% of the capacity of the bath or greater.
Installations will vary.
Kit is required for under-mount installations (sold separately).
If installing a rim-mount faucet, make sure there is no interference with
drain overflow before drilling any holes. Consult local and national codes for
minimum air gap requirements if installing a spout on the faucet deck.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product
specifications.
For the most current Specification Sheet, go to
www.kohler.com USA or
www.kohler.ca Canada 6-12-2024 19:55 – US