BliTZWOlF BW-OLT4 Outdoor Solar Lamp or Light User Manual
- October 30, 2023
- Blitzwolf
Table of Contents
BliTZWOlF BW-OLT4 Outdoor Solar Lamp or Light
At A Glance
- Solar Panel
- PIR Motion Sensor
- Light Source
- Mounting Bracket
- Switch
Package Includes:
- Solar Wall Light X 1
- Mounting Bracket X 1
- Pillar Hinge X 4
- Screw X 4
- User Manual X 1
Specification
- Model: BW-OLT4
- Material: PC+ABS
- Solar Panel: DC5.5V/1.55W
- LED: 128Pcs SMD2835
- Color Temperature: 6500K
- Brightness: 700lm
- Sensor Mode: Light & PIR Sensor
- Sensing Angle: 120°
- Sensing Distance: 8M
- Battery: 3.7V/1800mAh
- IP Rating: IP64
- Working Temperature: 0~45℃
Installation
- Turn on the toggle switch at the back of the solar lamp;
- Place the plastic anchor into the wall;
- Place the screw hole of the mounting bracket over anchor;
- Put the screw through the mounting bracket and twist it into the anchor;
- Align the lamp with the mounting bracket and insert it;
- The installation is completed.
Operation
Sensor Mode
Automatically turns off during the day and will only turn on when it senses
movement at night. The light will turn off after 30 seconds of no movement. If
people stay active in the sensor area the bright light will remain on.
Note :
- Please choose a location that receives adequate sunshine to ensure effective charging during the day.
- The recommend mounting height is 1.8-2.5 meters.
Addition
- The light sensor will activate when the ambient light level becomes lower than 20lux.
- Please Keep away from high humidity ,heat, and open flames as the items contains a built-in lithium battery.
- Please choose a location that receives adequate sunshine to ensure effective charging during the day
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>