KOAMTAC Bluetooth Barcode Scanner KDC470 & KDC475 User Guide

June 6, 2024
KOAMTAC

KOAMTAC logo KDC470 & KDC475
Quick Guide

KOAMTAC Bluetooth Barcode Scanner KDC470 &amp

Product Introduction

The KDC470 Bluetooth barcode scanner is available with 1D Laser, 1D CCD, or 2D Imager scan engines.
The KDC475 Bluetooth barcode scanner is available with an angled 1D Laser or 2D Imager scan engine.

1. KDC470/475 Diagram

KOAMTAC Bluetooth Barcode Scanner KDC470 &amp - KDC470 475
Diagram

*KDC475 is identical with the exception of an angled scan window

2. How to turn on and off

Refer to the figure in section 1.1 to locate the SCAN and DOWN buttons.
a) Press SCAN and DOWN buttons simultaneously for 5 seconds.
b) The KDC will beep when it is turned ON.

  • 2017/2018/early 2019 versions of KDC470 turn on upon pressing the scan button.

Bluetooth Pairing

Connecting your KDC using Bluetooth is made easy with the below-pairing barcodes. If you are unsure which profile is right for you, please visit www.koamtac.com for more information.

1. Bluetooth Profiles Explained.

a. HID Profile: This allows one-way Bluetooth communication with an Android or iOS host device. The KDC only transmits data to the host device.
b. SPP Profile: This allows two-way Bluetooth communication. The KDC transmits data to the host device and the host device can transmit data back to the KDC.
c . HID Windows Profile: Allows one-way Bluetooth communication with Windows host device. The KDC only transmits data to the host device.
Note: HID inputs data directly into an application. SPP requires the KOAMTAC SDK to input data into an application. To gain access to the SDK, please complete the form here: https://www.koamtac.com/sdk/

2. Pairing a KDC470/475 to your smart device

KOAMTAC Bluetooth Barcode Scanner KDC470 &amp - Pairing a KDC470
475

  1. Navigate to the Bluetooth setting on the host PC, Mac, Smartphone, or Tablet.
  2. Ensure that Bluetooth is enabled on the host device and search for devices.
  3. Using the KDC, scan the pairing barcode that corresponds to your desired Bluetooth profile. If you are unsure which Bluetooth profile is right for you, please refer to the previous panel.
  4. Check the list of available Bluetooth devices on your host device.
  5. From the list, select KDC470/475 listed by serial number in brackets that match the serial number found on the backside of the KDC470/475.
  6. In HID mode, KDC470/475 is now ready to use.
  7. To complete connection in SPP/MFi mode, launch KTSync or your application and select KDC470/475.
  • The KDC470/475 will beep when successfully connected.
3. Bluetooth Pairing a KDC470-BLE/475-BLE to your smart device with

special barcodes

KOAMTAC Bluetooth Barcode Scanner KDC470 &amp - Bluetooth
Pairing

a. Navigate to the Bluetooth setting on the host device and ensure that Bluetooth is both enabled and searching for devices.
b. Using the KDC, scan the pairing barcode above that corresponds to your desired Bluetooth profile. If you are unsure which Bluetooth profile is right for you, please refer to Chapter section 2.1.
• If you use an Android, iOS, or Mac device and desire an HID connection, then scan barcode #1 above.
• If you use a Windows device and desire an HID connection, then scan barcode

2 above.

• If you desire an SPP connection for any device, then scan barcode #3 above.
c. In HID or HID Windows Profile, check the list of available Bluetooth devices on your host device. From the list, select the KDC470-BLE/475-BLE listed by serial number in brackets that matches the serial number found on the backside of the KDC470-BLE/475-BLE.
KDC470-BLE/475-BLE will beep upon connection and display “Bluetooth Connected” on its screen. Now it is ready to use.
d. In SPP Profile for non-iOS, check the list of available Bluetooth devices on your host device. From the list, select the KDC470-BLE/475-BLE listed by serial number in brackets that matches the serial number found on the backside of the KDC470-BLE/475-BLE.
KDC470-BLE/475-BLE will beep upon connection and display “Bluetooth Connected” on its screen, but you should launch KTSync or your application and select KDC470-BLE/475BLE within the application to complete the connection. Now it is ready to use.
In SPP Profile for iOS, the KDC is NOT listed on your host device, so you should launch KTSync or your application and select the KDC470-BLE/475-BLE listed by serial number in brackets that matches the serial number found on the backside of the KDC470-BLE/475-BLE. KDC470-BLE/475-BLE will beep upon connection and display “Bluetooth Connected” on its screen. Now it is ready to use.

Usage

1. Using Keyboard Wedge (HID Keyboard)

This option is only available using a Bluetooth connection with HID profile.
Once the KDC is paired with the host, open any application with a text field and tap on the text field. Scan any barcode and it will populate in the text field.

2. Using KTSync – Android/iOS

You can use KTSync to utilize your KDC alone or with a native application. This is only available using USB OTG (Android), Serial (iOS), or Bluetooth connection with SPP or MFi.
a) Download and install KTSync from the Google Play Store or the Apple App Store.
b) Open KTSync and tap on the “Connect” option on the bottom left to view a list of available devices. (Fig. 1)
c) From the device list, select your KDC – ensuring that the serial number displayed in brackets matches the serial number on the back of your KDC. (Fig. 2)
d) Upon successful connection, KTSync will display “Connected” next to the name of your KDC at the top of the application. (Fig. 3)
e) To test your connection, scan any barcode. If the connection is successful, the barcode data will display on the screen. (Fig. 3)

KOAMTAC Bluetooth Barcode Scanner KDC470 &amp - Using
KTSync

3. Using KTSync Keyboard – Android

Once your KDC is connected to KTSync, you can use your KDC as a keyboard.
a) While KTSync is running in the background, navigate to Settings > Language & Input > Virtual Keyboard > Manage keyboards.
b) Tap on “KTSync Keyboard” to enable it.
c) Change “KTSync Keyboard” to the default keyboard. (Fig. 4)
To switch back to the previous keyboard, simply change the default keyboard again. Or, when a text field is selected swipe down from the top of the screen to bring up the notification panel. Select ‘choose input method’ and you can select the default keyboard from here. (Fig. 5)

KOAMTAC Bluetooth Barcode Scanner KDC470 &amp - Using KTSync
Keyboard

4. Using KTSync Keyboard – iOS

Once your KDC is connected to KTSync, you can use your KDC as a keyboard.
a) Navigate to the iPhone/iPad/iPod Settings > General > Keyboard > Keyboards

Add New Keyboard…> Select the KTSync keyboard to be added. (Fig. 6)
b) Select the KTSync Keyboard and toggle the switch to Allow Full Access. (Fig. 7)

KOAMTAC Bluetooth Barcode Scanner KDC470 &amp - iOS

c) Open the application you want to scan into and tap on the screen, so the on-screen keyboard appears.
d) Press and hold the globe icon located to the left of the spacebar.
e) Select the KTSync Keyboard and begin scanning. (Fig. 8)

KOAMTAC Bluetooth Barcode Scanner KDC470 &amp - iOS 1

Note: The KDC must be connected to KTSync & the KTSync keyboard must be selected for this to work.

5. Using other developed applications with SDK – Android/iOS

A Software Development Kit (SDK) for Android and iOS is available to all KOAMTAC
customers to ensure the smooth development of applications that work seamlessly with a KDC scanner. It’s easy to request the SDK from the KOAMTAC website:

KOAMTAC Bluetooth Barcode Scanner KDC470 &amp - developed applications with
SDK

a) On any web browser, open www.koamtac.com
b) Navigate to SUPPORT > Downloads > SDK
c) Complete the form and submit it.
After submission, a KOAMTAC representative will reach out regarding the next steps for completing the SDK Agreement.
The SDK package will have libraries, documents, a sample application, and its source code.

Product Specifications

Physical Design Standard SmartSled
Size KDC470: 2.56″ x 4.13″ x 0.62″

(65 mm x 105 mm x 15.8 mm)
KDC475: 2.56″ x 4.13″ x 0.94″
(65 mm x 105 mm x 24 mm)
Weight w/ battery| KDC470: 3.07 oz (87g)
KDC475: 3.1 oz (88 q)
Functionality| Supporting OS| Android / iOS / Mac OS X / Windows
CPU| ARM7, 32 bits
Keys| 2 SCAN(READ) Keys, UP Key, Down Key
Buzzer| Yes
LED Indicator| 1 Tri-color LED (Red / Amber / Green)
USB Port| 1 Micro USB Port
Memory| RAM| SDRAM 64KB
ROM| Internal Flash ROM 256KB
External Flash ROM 8MB
Barcode/RFID Storage| 409,600 Barcodes (EAN-13) or
409,600 RFID tags (in case of 12 bytes of EPC Data)
Power| Battery (Standard)| 1130 mAh Lithium-Ion
Battery Pack| Field Replaceable Hard Pack
Extended Battery| 2,0(X) mAh (Optional)
Charging Solution| USB Port, Charging Cradle (POGO, Optional)
Simultaneous Charging
(KDC & Host)| Yes
Charging Time (KDC)| 4 Hours
Communication| Bluetooth| V2.1+EDR, Class2, HID/SPP/MFi (Classic Models)
Or, BLE4.1 HID/SPP (BLE Models)
USB| USB HID,
USB Serial (Android with OTG cable / Windows)
Serial| Serial (iOS)
Barcode Reader| 1D Laser| Yes (KDC470L / KDC475S)
1D CCD| Yes (KDC470D)
2D Imager| Yes (KDC470C / KDC475H)

of scans (1-sec interval)| Laser > 60,000

CCD > 50,000
Imager > 25,000
| # of scans
(10 sec interval)| Laser > 20,000
CCD > 15,000
Imager > 10,000
---|---|---
Scan Range
(10mil Code39)| Laser (L): 1.97″ to 7.48″ (50 to 190 mm)
Laser(S,10mil Code128): 1.2″ to 19.0″ (30 to 483 mm)
CCD (D): 2.17″ to 11.81″ (55 to 300 mm)
Imager (C): 1.81″ to 9.68″ (46 to 246 mm)
Imager (H): 1.1″ to 113″ (28 to 338 mm)
Screen Reading| Yes (KDC470D, KDC470C, KDC475H)
Postal Codes / OCR
Passport| KDC470C: Yes / MRZ Supported
KDC475H: Yes / No
Companions| RFID (HF Reader)| Optional
RFID (UHF Reader)| Optional (0.5W, 1.0W)
Magnetic Strip Reader| Optional
Chip-and-PIN (EMV)| Optional
Extended Battery Pack
(2,000 mAh)| Optional
Pistol Grip| Optional
Environment| Drop Spec| 5 ft (1.5 m)
Tumble (Height 0.5m)| 500 cycles (1000 drops)
IP Rating| IP65
Operating Temp.| -4 “F – +122 T (-20 “C – +50 t)
Storage Temp.| -4-F – +140T (-20″C – +60t)
Humidity Spec| 5% – 95% (non-condensing)
Regulatory
Conformance| Laser Safety| IEC60825/CDRH Class II
LED Safety| IEC62471:2006
Regulatory| RED R&TTE, FCC, KC, TELEC, VCCI, SRRC, RoHS
Compliant
Accessories| Hand Strap| Yes
USB Cable| Yes (Micro USB)
1-slot Charging Cradle| Yes
4-slot Charging Cradle| Yes
Supporting Case
(Integrated Custom Case)| Galaxy XCover4 / Tab Active 2,
Apple iPod Touch 5/6G/ iPhone 7/8 Plus
Supporting Case (Universal Case)| All Cases

See Reference Manual for more detailed information.
Visit store.koamtac.com to purchase additional products and accessories.
QG_KDC470/475_20201014
116 Village Blvd, Suite 305, Princeton, NJ 08540 USA
T: + 1-609-256-4700 F: +1-609-228-4373
info@koamtac.com www.koamtac.com
©2020 KOAMTAC, Inc.
QG_KDC470/475_20201014

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals