ABBA LIGHTING CDR12 RGBW Spot Light Installation Guide

ABBA LIGHTING CDR12 RGBW Spot Light

Product Information

Thank you for purchasing the CDR12 product from ABBALightingUSA. This product has a rated voltage of 12 AC/DC. To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation, and usage.

Important Safety Instructions

Warning:
Lamp gets HOT quickly! Do not touch HOT lens, guard or enclosure. Keep lamp away from materials that may burn. Do not touch the lamp any time. Use a soft cloth. It is recommended only qualified persons to install this electrical product. Before attempting to install this unit, ensure all power connections are off for your own safety.

Warranty
This fixture is covered by a 2-year warranty from the date of purchase, not the date of installation. Please keep the proof of purchase. The warranty will be void if there is any damage due to improper usage or modification to the fixture. Failure to comply with the instruction in this manual may increase the risk of damage or injury and will void the warranty.

Caution
Fixture(s) must be installed in accordance with all local codes and ordinances. Do not install within 10 feet of a pool, spa or fountain.

Installation Instructions
The fixture(s) should be used ONLY with low voltage landscape power units that do not exceed 25A, 15V. The main cable from power units should be buried for less than 6 inches under the ground level.

1. Please ensure the light cable wires input are 12v ac/dc.
2. Turn off power before installation.
3. Attach the fixture(s) wires to the main cable connector suitable for direct burial. Use waterproof wire nuts. WN12 (Sold separately).
4. Put the spike into the ground. Try to make firm vertical mounting.
5. Adjust the light angle.
6. Turn on power.

Product Usage Instructions

To control the CDR12 light using your smartphone, follow these instructions:

1. Scan the QR code to download and install on your iOS device (iPhone, iPad) the application HappyLighting from the AppStore. On your Android device, download HappyLighting from Google Play Store.
2. Turn on Bluetooth on your Apple or Android device (see Fig.1).
3. Turn on the bullet floodlights. Run the application and tap the button on the top left corner to show the device list and select the light to start the connection (Fig. 2).
4. You can group 3 to 12 lights using the app (It depends on which version of the Android/iOS system you use), by tapping Group Manage. Select the lights and add them to the desired group (Fig 3). Multiple groups can be created.
5. RGBW Mode – Tap the Adjust button to enter RGBW mode. You can adjust both the color RGB (Red/Green/Blue) as well as the brightness of the color. There are 6 preset and 6 standard color buttons for easy access to the individual channels. (Fig. 6)
6. RGB Scenes – Tap the Style button to enter RGB Scene mode. There are 20 preset modes. You can adjust the speed of each mode using the slider (Fig. 7).
7. Timer – The controller has a built-in timer function. To access it tap the Timing button. You can set the desired ON or OFF time or you can set the light to work in a time interval. The timer will not operate if the power supply is interrupted (Fig. 8).

RATED VOLTAGE 12 AC/DC
Thank you for purchasing this quality product. To ensure correct function and safety, Please read and follow all instructions carefully before assembly, installation and before using this product.

IMPORTANT SAFETY INSTRUCTIONS

LIGHTEN LAMP IS HOT!

WARNING:
TO REDUCE THE RIS K OF FIRE OR INJURY TO PERSONS:

• Lamp gets HOT quickly!
• Do not touch HOT lens, guard or enclosure.
• Keep lamp away from materials that may burn.
• Do not touch the lamp any time. Use soft cloth.
• It is recommended only qualified persons to install this electrical product.
• Before attempting to install this unit, ensure all power connections are off for your own safety.

WARRANTY

• This fixture is covered by a 2 year warranty from the date of purchase, not the date of installation. Please keep the proof of purchase
• Warranty will be void if there is any damage due to improper usage or modification to the fixture.
• Failure to comply with the instruction in this manual may increase the risk of damage or injury and will void the warranty.

CAUTION:
Fixture(s) must be installed in accordance with all local codes and ordinances. Do not install within 10 feet of a pool, spa or fountain

INSTALLATION INSTRUCTION

Fixture(s) should be used “ONLY” with low voltage landscape power units that do not exceed 25A, 15V.

The main cable from power units should be buried for less than 6 inches under the ground level.

1. Please ensure the light cable wires input are 12v ac/dc.
2. Turn off the power before installation.
3. Attach the fixture(s) wires to the main cable connector suitable for direct burial. Use waterproof wire nuts. WN12 (Sold separately).
4. Put the spike into the ground. Try to make firm vertical mounting.
5. Adjust the light angle.
6. Turn on the power.

APP CONNECTION AND MODES

APP CONNECTION AND MODES – LED BULLET FLOOD

1. Scan the QR code to download and install on your iOS device (iPhone, iPad) the application HappyLighting from the AppStore. on your Android device, download HappyLighting from Google Play Store.
2. Turn on the Bluetooth on your Apple or Android device (see Fig. 1)
3. Turn on the bullet floodlights. Run the application and tap the button on the top left corner to show device list and select the light to start connection (Fig. 2).
4. You can group 3 to 12 lights using the app (It depends on which version of Android/iOS system you use), by tapping “Group Manage”. Select the lights and add them to the desired group (Fig 3). Multiple groups can be created.
5. Music Mode – Tap the “Music” button to enter Music mode. In this mode, the connected bullet floodlight will light in the rhythm of the music playing on the smartphone or tablet. To do this, select your music library on your smartphone or tablet and select the desired music. With the pause/play button in the middle, you can start or stop the music and the LED light (Fig. 4).
6. Voice Mode – Tap the “Tape” button to enter in Voice mode. In this mode, the connected bullet floodlight lights up depending on the volume/noise from the outside like a microphone (Fig. 5).
7. RGBW Mode – Tap the “Adjust” button to enter RGBW mode. You can adjust both the color RGB (Red/Green/Blue) as well as the brightness of the color. There are 6 preset and 6 standard color buttons for easy access to the individual channels. (Fig. 6)
8. RGB Scenes – Tap the “Style” button to enter RGB Scene mode. There are 20 preset modes. You can adjust the speed of each mode using the slider (Fig. 7).
9. Timer – The controller has a built-in timer function. To access it tap the “Timing” button. You can set the desired ON or OFF time or you can set the light to work in a time interval. The timer will not operate if the power supply is interrupted (Fig. 8).
10. Remote controller
    • ON/OFF Button – Switch the unit on or off.
    • Dimming and Speed – When in static monochrome mode use it to adjust the brightness; when the set mode is in FADE, STROBE, FLASH or SMOOTH it adjusts the speed
    • Static Monochrome – Use the buttons to directly select the desired color (16 choices)
    • FLASH – Automatic change of colors (fast)
    • STROBE – Automatic jumping change of colors (slow)
    • FADE – Automatic change of seven colors with a blending effect
    • SMOOTH – Automatic change of three colors with a blending effect

www.ABBALightingUSA.com.

References

• Abba Lighting USA Distributor Outdoor Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>