BliTZWOlF BW-CML3 RGB Curved Computer Monitor Light Bar with R1000 Curvature User Manual

BliTZWOlF BW-CML3 RGB Curved Computer Monitor Light Bar with R1000 Curvature

At A Glance

1. Mini Remote Control
2. Lamp Pole
3. White & Warm LED Bead
4. RGB LED Bead
5. Fixed Holder
6. Collapsible alloy stand
7. Type- C Port

Package Included

• Monitor Light X1
• Remote Control X1
• USB To Type-C Cable X1
• User manual X1

Specifications

Model: BW- CML3
Material: Aluminum+ABS+PC
Input: DC5V / 1 A
Rate Power: 5W
Curvature: R1000
CRI: >97
LED   Color: 2900- 6000K+RGB
LED Quantities: 1 00pcs SMD2835+40pcs SMD5050
White Brightness: 500lux
Ambient Mode: 2 Kinds+Music Sync
Control Way: 2.4GHz RF Control
Product Size: 55014530mm
Remote Control Size: CD45X27mm
Product Weight: 515g

Installation

Rotate the clip and place it firmly on the monitor or computer, then connect the power cable to monitor light and power adapter, and plug the power adapter into wall socket. When the lamp is first powered on, white light and RGB light will be on at the same time

Hold the bottom of the remote control with one hand, press the bottom anti- slip pad with the other hand, and turn it counterclockwise to open the back cover of the remote control. Remove the insulating gasket and close the back cover, turn clockwise to lock the back cover in place.

Operation

Remote Control Pairinq Way

Plug in the power again and hold down the remote control for a few seconds. When the RGB light slowly flashes 3 times, it means that the remote control is paired successfully. If you want to cancel the pairing, plug in→power off→plug in→power off→plug in, the RGB light will rapidly flash 3 times to unpair.

White light Setting

RGB Ambient Light Setting

• Double click to cycle through the effects of the ambient light, which has three modes.
  1: Colorful gradient;
  2: Colorful + breathing flashing gradient;
  3: Sound pick- up Colorful light effect;

• If the remote control is switched to the Music Sensing mode, the RGB colourful will go out if there is no ambient sound, and the marquee light effect wi ll only appear if there is sound sensing in the surroundings.

Tip:

1. The default memorizes the ambient light effect mode used before turning off the lights last time.
2. After a normal shutdown or an unexpected shutdown, the lamp wi ll enter the mode used before the shutdown by default.

Cautions

1. It is recommended to use with 5V / 2A adapter for better experience.
2. This product can be applied to flat or curved displays with a thickness of 0~45mm.

SCHEUFER Technologies GmbH
EC RE p Address: Hertleinstrasse 37, 91052, Erlangen, Germany
E-mail: Mark.Zhang@scheufer.com

VISHTEC UK Co.,Ltd
UK REP Address: Unit G25 Waterfront Studios, 1 DockRoad, London, E16 1AH
E-mail: Vincent.feng@vish-tec.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>