ROBUS RCM3030-04 Cosmic 30W LED Flood Light Instruction Manual
- June 6, 2024
- ROBUS
Table of Contents
ROBUS RCM3030-04 Cosmic 30W LED Flood Light
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES. Electrical products can cause death or injury, or damage to property. If in any doubt about the installation or use of this product, consult a competent electrician
Note:
Product technical information and specification may change over time without
prior notification. For the latest technical information please visit our web
site www.robus.com or
robusdirect.com
-20°C < Ta < +40°C, 220-240V ~ 50/60Hz, Class I, IP65 Luminaire is non-dimmable
Installation
- Ensure mains supply is switched off before commencing work.
- Select suitable location for luminaire.
- Mark wall with appropriate fixing positions. Before drilling, ensure that the hole does not impinge on pipe work, cables or other building services.
- Attach luminaire and fix bracket by tighten screws, then adjust to desired angle. Ensure that it is secure.
- The luminaire is supplied with 1m of rubber cable. Using suitable IP rated enclosure terminate Brown (Live), Blue (Neutral) and Green/Yellow (Earth) to switch supply.
- This product has no user serviceable parts. If any part is damaged, disconnect from mains and discontinue use.
Note: No “fixings screws provided’, please use appropriate fixing screws.
Projection Distance: 6m – 12m
Max Projection Area: 12m x 16m
Mounting Height: 2.5m – 4m
Market Surveillance: These products contain light sources of
energy efficiency as detailed below.
RCM3030-LS: Class E
RCM3040-LS: Class E
Remove screws at the back the fitting. Open housing.
Remove LED PCB (LS) and Remove driver PCB (SCG)”
Information for the Product user
- Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with crossed out wheelie bin symbol).
- Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection centre for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
- This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is separated from normal household waste and recycled in the WEEE chain
- The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be disposed of according to local WEEE regulations
The Installation must be carried out by a qualified electrician
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>