ROBUS RHV0830-01 IHIO 8W and 12W IP54 Oval Bulkhead Instruction Manual
- June 6, 2024
- ROBUS
Table of Contents
ROBUS RHV0830-01 IHIO 8W and 12W IP54 Oval Bulkhead
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES. ! Electrical products can cause death or injury, or damage to property. If in any doubt about the installation or use of this product, consult a competent electrician
Note:
Product technical information and specification may change over time
without prior notification. For the latest technical information please visit
our web sitewww.robus.com or
robusdirect.com
-20°C < Ta < +40°C, 220-240V ~ 50/60Hz, Class II, IP54 Luminaire is non-dimmable Suitable for mounting on a normally flammable surface.
Installation
- Ensure mains supply is switched off before commencing work.
- Ensure there is at least 100mm of free space around the fitting location.
- Using a flat head screw driver remove the trim. Expose the base by removing the screws. Remove diffuser/ LEDs from base. Unplug connector.
- Drill mounting holes in the base.
- Mark appropriate fixing hole positions on wall, check location of buried cables, pipes and other building services before drilling.
- Feed supply cables through cable entry hole and attach base to surface.
- Connect supply to terminals Brown to L and Blue to N.
- Plug in connector, attach diffuser/ LEDs and tighten screws. Ensure that it is secure. Attach appropriate base.
Market Surveillance:
LS Code of energy efficiency Class E.
RHV0830-LS
RHV1230-LS
RHV1240-LS
Disconnect LED section from the base, expose LED plate
Information for the Product user
-
Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with crossed out wheelie bin symbol).
-
Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection centre for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
-
This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is separated from normal household waste and recycled in the WEEE chain
-
The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be disposed of according to local WEEE regulations
The Installation must be carried out by a qualified electrician
L.E.D lighting & Electrical Distribution Group UC
IRE: Nangor Road, Dublin 12, D12 E7VP, Ireland
UK: Bracknell Enterprise & Innovation Hub, Ocean House, 12th Floor, The
Ring, Bracknell, Berkshire RG12 1AX, UK
Tel: +353 1 7099000
Fax: +353 1 7099060
Email:info@robus.com
Website:www.robus.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>