ELRO DV477IP IP Video Door Intercom with 7-Inch Monitor Instruction Manual

MANUAL
IP VIDEO DOOR INTERCOM
WITH 7″(18cm) MONITOR
DV477IP-Series
Home is not a place, it’s a feeling

Introduction

Please read this manual before you start mounting and installing the IP VIDEO DOOR INTERCOM.
The set has an outdoor unit with a brushed aluminum finish and a protective heavy metal rain cover for mounting on the wall. For indoor use, a nicely designed monitor in brushed aluminum is included.

• The camera has a viewing angle of 60° horizontally/45° vertically and has 6 white LEDs for optimal night viewing up to at least two meters away from the camera.
• The outdoor unit has a nameplate that lights up when the call button is pressed.
• A twilight switch activates the 6 white LEDs in the dark.
• The monitor has an 18 cm LCD screen.
• There are 16 ringtones available from which you can choose.
• You can adjust the volume, brightness, and color intensity to your preference.
• The system provides a 12V DC voltage for an electric door opener.
• There is a potential-free contact for switching, for example, a gate or fence with its own power supply.
• For the connection of an electric door opener use a 2 core cable with a thickness of 0.2 mm² per wire. See the wiring diagram in this manual on page 7/8.
• There is a 2-core cable with a plug supplied for the connection of an electric door opener through the outdoor unit. Please note that in this case, the outside door only gives access to a common room/staircase and not direct access to your home.
• With the free ELRO Intercom application on your smartphone, you can talk to a visitor, take a picture/video and you can even remotely control the electric door opener.
• A built-in box (ELRO DV47EB) is available as an accessory via www.elro.eu or via the retailer where you purchased this set.

Package contents

1. Outdoor unit with bell pushers and camera
2. Rain shelter
3. Monitor
4. Connection cable length 15 m
5. Connection cable
6. Adapter with 1.75 m cord
7. Mounting bracket
8. Connection cable for the electric door opener
9. Screws, plugs, and Allen wrench

Mounting outdoor unit

• Remove the outdoor unit (1) from the rain-sun shade and use it to mark drill holes for mounting on the wall (2).
• The shade must be mounted flush with the entire rear side of the wall/wall.
• Drill one or more holes (3) to connect the connection cables through the wall/wall to the outdoor unit.
• We recommend a mounting height (4) between 1,35 and 1,70 meters.
• Try to avoid direct exposure to sunlight.
• Plug the connection cables into the respective slots (5).
• After mounting, the angle of view of the camera can be corrected if necessary. Use a screwdriver (6) to loosen the screw a little and point (7) the camera to correct the image.
• On the underside of the outdoor unit is an Allen screw (8) which you can unscrew with the supplied Allen key. Carefully remove the aluminum front plate, rock the transparent plastic cover with a flat screwdriver. You can now put your house number(s) on a piece of paper.
• Use the Allen key to screw the outdoor unit into the rainshade.

Mounting the monitor

• The monitor should be mounted within range of your WiFi. The supplied cable is 15 meters, taking into account the location of the monitor.
• Mount the mounting bracket (1) on the wall and take into account that the connections of the outdoor unit, the 12V DC adapter, and possibly the electric door lock have to be made on the back of the monitor.

• The mounting bracket provides exactly the space to connect the 4 core connection cable (2) between the monitor and bracket. Press (3) to open the clamp contact:
  – 1 brown = audio
  – 2 green = earth
  – 3 black = video
  – 4 blue = current

• Plug the adapter plug (4) into the DC12V connection.

• Now you can place the monitor on the mounting bracket and carefully slide it down, think of the cabling.

4.1 Control Regulators
The following controls are located on the side of the monitor:

• Ringer volume (5), adjustable in 3 steps.
• Ringtone selection (6), choice of 16 ringtones.
• Brightness (7), controls the image from bright to dark.
• Chroma (8), which controls the intensity from color to black and white.
• Speech volume (9).

4.2 Functions of the monitor

With this button, you can look “outward” at any time. After 40 seconds, the monitor automatically switches off again. If you want to stop prematurely, press the button with the receiver twice.
This allows you to switch an electric door opener. After pressing this button, a 12V DC voltage is released. The connection is via terminal contacts 5 and 6 of the monitor or by means of the 2 wire cord via the outdoor unit.
With this button, you switch the potential free terminals 7 and 8. Here you connect a port/ gate opener with its own power supply.
When a visitor logs on, the monitor switches on automatically. Press this key to start a call. Press again to end the call, the monitor automatically turns off.

Wiring diagram

ELRO Intercom app

• Convince yourself that the smartphone on which you install the app uses the same WiFi signal as the one on which you want to install the intercom.

• The intercom system only works on 2.4 Ghz.

• Download the ELRO Intercom app, go to:
  – Google Play Store for Android
  – Apple App Store for iOS.

• You will be asked for permission to access your smartphone (1).

• You will then be presented with a “Privacy Statement Agreement”, click on it (2) to view the “Privacy Policy”. Press “Go to use” (3) to continue.

Pairing the app

• Open the app and press the plus (4) to add a new device.
• Select your device (5) from this screen.
• Plug the adapter of the monitor into an electrical outlet to connect the device and wait for the monitor to say “Please setup network by your mobile application”. Check “Agree” and press next (6).
• Now the name of the WiFi signal will be displayed, you need to enter the WiFi password (7) yourself. Click on the eye to check, pay attention to upper and lower case letters. Press next.

7.1 Choose “Smart Config”.

• A device is now being searched for. When the device is found, tick it (8) and press add.
• The device has been added and comes “Online”. Press (9), change the password to a personal password. Note, case sensitive, min. 8 / max. 16 letters and numbers (10).
• In configuration (11) you can change the name to your personal preference (12).

7.2 Or choose “QR Code way”.

• Now scan with the camera of the outdoor unit the QR Code that is visible on your smartphone.
• When the device is found, tick it (8) and press add.
• The device has been added and comes “Online”. Press (9), change the password to a personal password. Note, case sensitive, min. 8 / max. 16 letters and numbers (10).
• In configuration (11) you can change the name to your personal preference (12).

Explanation app icons

Sharing the app

De app The app can be shared, for example with family. The family member should download and install the app as described in chapter 6. ELRO Intercom app.
Proceed as follows:

• Open the app and press the plus (4) to add a new device.
• Select your device (5) from this screen.
• Check “Agree” and press next (6).
• Now the name of the WiFi signal will be shown, you have to fill in the WiFi password (7) yourself.

When you arrive here, choose either Equal rights [LAN Config] or Restricted rights [QR Code way].
With limited rights, there is no access via configuration to advanced settings.

9.1 Equal rights

• Choose LAN Config
• The search is now for Jane Doe 48A. When the device is found, tick it (8), then press add.
• When Jane Doe 48A is added and “Online” appears, press (9).
• You will now be asked for the password that is set at (10) change password.

9.2 Restricted rights

• Choose QR Code way.
• Give permission for use.
• Now you need to scan the QR code that the hostess Jane Doe can show via configuration/QR Code.

Removing device

• Removing a device from the app is very easy. Open the app and slide to the left, press delete and the device will be removed from the app.

Reset

If the pairing of the ELRO Intercom app fails and you are convinced that you are using the correct WiFi signal (2.4Ghz) with the associated password, it is recommended to reset the monitor. Proceed as follows:
– Press the key with the key for at least 5 seconds, the monitor will start the reset procedure.
– When the reset procedure is in operation you will hear: “Reset parameter is successful, the system is about to restart”. This means: “Reset parameter is successful, the system is about to restart”.
– Then wait until the monitor reports with the text: “Please setup network by your mobile application”. This means: “Please setup network by your mobile application”. Mobile application refers to your Android or iOS smartphone/tablet.
– You can now try again to connect the app to the WiFi monitor.

Specifications

MONITOR

BUITENUNIT

Safety instructions

• Do not install the equipment in an environment of high temperature or high humidity.
• Do not place the equipment near televisions, as signals from televisions and the intercom may interfere with each other.
• Do not touch the equipment with wet hands.
• Do not throw, drop, or otherwise damage the equipment.
• Clean the equipment with a soft cloth. Do not use any polish, thinner, or caustic agents.
• Do not expose the camera to direct sunlight.
• Use the product in a situation where there is no interference.
• When a car or motorcycle passes by, the image may become blurred or disappear due to interference from radio waves.

Note:

• To prevent damage, install the devices according to the instructions.
• Place the AC adapter in an accessible location where it can be disconnected.
• Use the supplied cables.

Declaration of Conformity DoC

– I, ELRO Europe, hereby declare that the type of radio equipment DV477IP complies with Directive 2014/53/EU. The full text of the EU declaration of conformity can be consulted at the following internet address: www.elro.eu/compliance“.
– Frequency: 2.4GHz
– Maximum transmission power: < 20 dBm

Symbols

Recycling and Disposal: The WEEE symbol means that this product and batteries must be disposed of separately from household waste. When this product reaches the end of its life, take it to a designated waste collection point nearby to ensure safe disposal or recycling. Protect the environment and human health, use natural resources responsibly!

Read the manual before use and keep it in a safe place for future use and maintenance.

Guarantee visit www.elro.eu

ELRO Europe | www.elro.eu
Postbus 9607 – Box E800
1006 GC Amsterdam – The Netherlands

References

• Welkom bij ELRO | Voor een comfortabele en veilige leefomgeving ELRO
• Welkom bij ELRO | Voor een comfortabele en veilige leefomgeving ELRO

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>