ELECOM P-TPACAPEN01 Series Stylus Pen User Guide
- May 15, 2024
- ELECOM
Table of Contents
ELECOM P-TPACAPEN01 Series Stylus Pen
Specifications
Materials
Main body: Aluminum
- Pen tip: Polyacetal
- USB Type-C Port Cap: Silicone
- Power switch: ABS plastic
Dimensions:
- Length: approximately 160 mm/6.3 in.
- Diameter of main body: approximately 10 mm/0.4 in.
- Pen tip: approximately 2 mm/0.08 in.
- Weight: approximately 15 g/0.53 oz
Charging Instructions
To charge the device, follow these steps:
- Insert the USB Type-C cable into the charging port of the device.
- Check the LED indicator to determine the remaining charge level.
- The LED will show different colors based on the remaining charge percentage.
Power On/Off Instructions
To power on the device:
- Slide the power switch on the top of the unit.
- The LED will light up, indicating that the power is on.
To power off the device
- Slide the power switch to turn off the power.
- The LED will turn off, indicating that the device is powered off.
Auto-Sleep Function
If there is no activity for approximately 5 minutes, the device will enter
auto-sleep mode. To wake it up, slide the power switchto OFF and then back to
ON.
FAQ
- Q: What should I do if the LED does not light up when I slide the power switch?
- A: If the LED does not light up, please charge the device using the provided USB Type-C cable.
- Q: How can I prevent the auto-sleep function from activating unintentionally?
A: Ensure that the stylus pen is turned off before storing it in a pocket or bag to prevent unintentional activation of the auto-sleep function due to movement.
P-TPACAPEN01 series Stylus Pen User’s Guide
Names of parts and their main functions
Operating time
Approximately 10 hours
About charging
Insert the USB Type-C cable into the charging port to charge.
The LED will indicate the remaining charge
Remaining charge| 0% – 10%| 11% – 34%| 34% – 67%| 67% –
100%
---|---|---|---|---
In operation| Red flashing light| 1 constant blue light| 2 constant blue
lights| 3 constant blue lights
Charging while the power is o| –| 1 flashing green light| 2 flashing
green lights| 3 flashing green lights
Charging while the power is on| –| 1 green flashing light + 1 blue
constant light| 2 green flashing lights + 2 blue constant lights| 3 green
flashing lights + 3 blue constant lights
Power on
Slide the power switch on the top of the unit, and the LED will light up and
the power will turn on. Please charge this product if the LED does not light
up.
Power off
The LED and the power will be turned off by sliding the power switch on the
top of this product while the power is on.
- The auto-sleep function will activate after approximately 5 minutes of inactivity and this product will be turned off. To wake up this product, slide the power switch to OFF, and then slide it to ON again.
- Auto-sleep function is vibration sensitive.
- When the stylus pen is not turned off before placing in a pocket or bag, the auto-sleep function may not activate if movement is detected.
Specifications
Materials
Main body: Aluminum Pen tip: Polyacetal USB Type-C Port Cap: Silicone
Power switch: ABS plastic
Dimensions
Length: approximately 160 mm/6.3 in. Diameter of main body: approximately 10
mm/0.4 in. Pen tip: approximately 2 mm/0.08 in. Weight: approximately 15
g/0.53 oz
Package contents
Stylus pen, USB Type-C cable
Usage Precautions
-
You may not be able to use the pen on the screen edges on some devices.
-
This is to prevent accidental operation.
-
Please power off the stylus pen after use.
-
Use in an environment of 15 ℃/59 °F or higher.
-
Subjecting the stylus to impact, such as dropping it, may damage the pen tip as shown in the figure on the right.
If the stylus pen is worn out (the metal part is exposed) or damaged as shown in the figure on the right, please replace the pen tip. -
The replacement pen tip is P-TIPACSTAP02BK.
-
You may not be able to attach this product to your tablet, whether the magnet on the tablet is covered by the shape of the tablet case.
-
The operational feel of the stylus pen may differ depending on the user.
-
If you are using a liquid crystal screen protective film, it may lead to a decrease in the sensitivity of the stylus pen.
-
If you are using a liquid crystal screen protective film, the pen tip may leave scratch marks on the film. Using any part other than the pen tip on the screen may lead to damage to the screen.
-
Do not tap or rub the screen vigorously with this product.
-
Replace the pen tip when it has deteriorated.
-
Tilting the pen tip excessively may break the main body.
-
Keep out of reach of children to prevent accidental ingestion.
-
Do not use alcohol-based agents or other chemicals on this product.
-
Direct contact with objects made of resin, such as synthetic leather, may stain the product.
-
Avoid exposing the product to high temperatures, humidity and direct sunlight. Doing so may cause deformation or deterioration of this product and your device.
-
Please be aware that we accept no responsibility for any damage, breakdown, or data loss associated with your device.
-
Do not subject this product to strong vibration or impact.
-
Do not use this product for any purpose other than that indicated herein.
-
The sensitivity of the stylus pen may be affected by the usage status of the device and the application used. The operation cannot be guaranteed on all devices.
-
Do not attempt to disassemble, repair or modify this product.
-
Do not immerse the product in water and use it. Do not touch this product when your hands are wet. This product contains magnets. Do not put it close to magnetic cards.
Limitation of Liability
In no event will ELECOM Co., Ltd be liable for any lost profits or special,
consequential, indirect, or punitive damages arising out of the use of this
product.
ELECOM Co., Ltd will have no liability for any loss of data, damages, or any
other problems that may occur to any devices connected to this product.
Compliance status
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
In order to make improvements to this product, the design and specifications are subject to change without prior notice.
www.elecom.co.jp/global/certification/
Responsible party ELECOM USA, Inc.
4041 MacArthur Blvd Suite 400, Newport Beach, CA 92660 USA
elecomusa.com
Trademark and name of the manufacturer:
ELECOM CO., LTD.
Fushimimachi 4-1-1, Chuo-ku, Osaka City
www.elecom.co.jp/global/
- ELECOM CO., LTD. owns the copyright of this manual.
- Unauthorised copying and/or reproducing of all or part of this manual is prohibited.
- The images are for illustration purposes only and may differ from your actual product.
- The specifications and appearance of this product may be changed without prior notice for product improvement purposes.
- Please contact the shop where you purchased this product if you have any feedback or questions about the contents of this manual.
- In order to make improvements to this product and for improved safety, the colors and specifications are subject to change without prior notice.
- We shall bear no responsibility for any device failure or malfunction of other devices resulting from the use of this product.
- When exporting this product, check the export regulations for the country of origin.
- iPad, iPad Air, iPad Pro and iPad mini are trademarks of Apple Inc., registered in the U.S. and other countries and regions.
- USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.
- The company and product names on the packaging and the manual are, in general, trademarks or registered trademarks of their respective companies.
Global Support
A customer who purchases outside Japan should contact the local retailer in
the country of purchase for enquiries.
In “ELECOM CO., LTD. (Japan)”, no customer support is available for enquiries
about purchases or usage in/from any countries other than Japan. Also, no
foreign language other than Japanese is available. Replacements will be made
under stipulation of the Elecom warranty.
Stylus Pen
Manual, Safety precautions, and Compliance with Regulations 1st edition,
February 6, 2024
©2024 ELECOM Co., Ltd. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>