CRYSTORAMA DAN-404-VG Danielson 4 Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
ASSEMBLY INSTRUC TION MODEL#DAN-404-VG
DAN-404-VG Danielson 4 Light Chandelier
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need 4- Candelabra Base Bulb 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE This fixture is Dry rated
How to install
-
Slip the center rod assembly along wire and thread onto the nipple located on the top of the light cluster.
-
Slide the fabric shade inside the metal frame and secure it with clips.
NOTE: HIDE THE SEAMS OF THE SHADE BY ALIGNING IT WITH A VERTICAL METAL BAR. -
Determine the preferred hanging height and adjust the required rods.
-
Feed the wires through the rods and connect them together.
-
Slip canopy kit along wire and thread it into the top of the rod assembly.
-
Install the mounting screws into the matching holes in the mounting bar. Secure the mounting bar to the outlet box with the outlet box screws.
-
Raise canopy allowing the mounting screws to protrude through the holes in the canopy, and secure with the ball nut.
-
Install the bulbs(not included) into the socket.
WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
Part Number
Part Numbers
A. (1)-Mounting hardware
B. (1)-Canopy kit W5-7/8’’xH1’’ #XRF404VGCAN5.875IN
C. (2)-Ball nut #XRF400VGBANUT
D. (1)-Rod D5/8’’xL6’’ #XRF404VGROD6IN
E. (3)-Rod D5/8’’xL12’’ #XRF404VGROD12IN
F. (1)-Center rod W1/2’’xL7-1/4’’ #XRF404VGSTEM7.25IN
G. (1)-Fabric shade W16-1/4’’xH9-3/4’’ #XRF404SHA16.25IN
H. (4)-Candle sleeve W7/8’’xL2’’
I. (1)-Metal frame
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>