Bigzzia HB-866-5j Treadmill Radio Frequency Replacement Clone Remote Control Instruction Manual
- September 25, 2024
- BIGZZIA
Table of Contents
- HB-866-5j Treadmill Radio Frequency Replacement Clone Remote Control
- Product Specifications:
- Product Usage Instructions:
- 1. Battery Installation:
- 2. Operating the Remote Control:
- 3. Maintenance:
- 4. Troubleshooting:
- Q: What should I do if the remote control does not work?
- Q: How far is the effective range of this remote control?
HB-866-5j Treadmill Radio Frequency Replacement Clone Remote Control
“`html
Product Specifications:
-
Product Model: HB-866-5j
-
Operating Voltage: DC3V (one 2032 button
battery) -
Operating Current: Less than 20MA when
transmitting -
Operating Frequency: 433.92MHZ
-
Modulation Mode: OOK
-
Standby Current: Less than 5UA
-
Size: 9840.511mm
-
Product Quality: 24.5g
Product Usage Instructions:
1. Battery Installation:
Open the battery compartment of the remote control and insert
one 2032 button battery, ensuring correct polarity.
2. Operating the Remote Control:
To transmit a signal, press the appropriate buttons on the
remote control. Ensure the device is within range and pointed
towards the receiver for effective operation.
3. Maintenance:
Keep the remote control clean and free from dust or debris.
Avoid exposure to extreme temperatures or moisture to prolong the
product’s lifespan.
4. Troubleshooting:
If the remote control fails to operate, check the battery
connection and replace the battery if necessary. Ensure there are
no obstructions between the remote and the receiver.
Frequently Asked Questions (FAQ):
Q: What should I do if the remote control does not work?
A: First, check the battery connection and replace the battery
if needed. Ensure there are no obstacles blocking the signal
between the remote and the receiver.
Q: How far is the effective range of this remote control?
A: The effective range of the remote control is approximately
[provide range if available] meters under normal operating
conditions.
“`
·
433M remote control instruction manual Pictures of objects:
Parameters: Product Model: HB-866-5j Operating voltage: DC3V (one 2032 button
battery) Operating current: less than 20MA when transmitting Operating
frequency: 433.92MHZ Modulation mode: OOK Standby current: less than 5UA Size:
9840.511mm Product quality: 24.5g
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation Instructions for
operation: 1: Press the PLAY button, send signal, open the machine, release to
stop sending. 2: Press the+key, send signal,speed+, release to stop sending.
3:Press the-key, send signal,speed-, release to stop sending. Application
production scene: 1: The treadmill remote control 2: remote control toys. 3:
Smart furniture. , etc. 4:Wireless remote control
Warning:
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the device and receiver. –Connect the device into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>