ELRO DB2000PLB Wireless Doorbell Kit User Manual

ELRO DB2000PLB Wireless Doorbell Kit

Description

Item nr.| Colour| Doorbell battery| 220-240V AC| Doorbell pieces| Push button battery
---|---|---|---|---|---
DB2000-P1C1B| | X| V| 1| 1 x 23A (incl.)
DB2000-P1C2B| | X| V| 2| 1 x 23A (incl.)
1| Melody selector
---|---
2| Pairing and volume button
3| Led indicator
4| Sound output
5| Battery compartment
6| 220-240V AC plug-in model
7| Activate battery
8| Push battery replacement
9| Mounting with screws and plugs or…..
10| Mounting double adhesive

PAIRING PUSH BUTTON AND DOORBELL

The push button and doorbell are supplied paired. The battery of the push button must be activated (7), pull off the plastic lip.

• Proceed as follows if the pairing is to be made:

  • Press the pairing button (approx. 5 sec.), the blue led will go on.

  • The doorbell will now go into the pairing learning mode (25 sec.).

  • Then press the doorbell push button.

  • The doorbell responds with the set melody, the push button is paired.
    Remark

  • Multiple receivers and push buttons can be linked.

  • The doorbell has an internal memory, after battery change there is no need to be paired.

MELODY SELECTION

• With the melody selector switch (1) you set the melody of your choice.

SET VOLUME

• The volume can be set with the volume knob (2): 100 % | 75 % | 50 % | 25 % | off.

WIPING THE MEMORY OF PAIRED BUTTONS

• Plug-in models
  • Unplug the doorbell from the wall outlet
  • Press the pairing button.
  • While pressing the button place the doorbell back.
  • While pressing the led will flash and then will remain lit.
  • Release the button, the led turns off.
  • The memory of all paired buttons is erased.

TROUBLESHOOTING

• The doorbell does not ring
  • The doorbell may be out of range of the push button.
  • Change the distance between doorbell and push-button; the range may be affected by local conditions (metal, iron wickerwork, heavy concrete walls).
• The battery of the push-button is empty
  • Replace the battery.
  • Note the polarity (+ and -).
  • If necessary, reconnect the push-button to the doorbell.
• The doorbell has no power.
  • Check the socket

DoC

• I, ELRO Europe, hereby declare that the radio equipment type DB2000 is in conformity with Directive 2014/53/EU. The full text of the EU Declaration of Conformity can be found at the following internet address: www.elro.eu/compliance
• Frequency: 433.92Mhz
• Maximum transmitting power: -1.02 dBm

Specifications

Symbol

 Recycling and Disposal: The WEEE symbol indicates that this product and its batteries must be disposed of separately from household waste. When this product reaches the end of its service life, take it to a designated waste collection point nearby to ensure safe disposal or recycling. Protect the environment and human health, use natural resources responsibly!

 Read this manual before use and keep it in a safe place for future reference and maintenance.

 Warranty | Granite www.elro.eu

ELRO Europe | www.elro.eu
Postbus 9607 – Box E800
1006 GC Amsterdam – The Netherlands

References

• Welkom bij ELRO | Voor een comfortabele en veilige leefomgeving ELRO
• Welkom bij ELRO | Voor een comfortabele en veilige leefomgeving ELRO
• compliance ELRO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>