AeroGrow 980202-0100 Tabletop Grow Light User Guide
- June 9, 2024
- AeroGrow
Table of Contents
AeroGrow 980202-0100 Tabletop Grow Light
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
When using the Aero Garden® Grow Light, basic precautions should always be
followed. Read all instructions before using your Aero Garden® product.
DANGER! – To reduce the risk of electric shock:
-
The Aero Garden® Grow Light has a specific plug. Do not change or modify the plug in any way
-
Always unplug the Aero Garden Light from electrical outlet before cleaning
WARNING! – to reduce risk of burns, fire, electric shock, or injury to persons: -
Unplug the Aero Garden Light from outlet before putting on or taking off parts
-
Please take proper precautions when operating an Aero Garden Light near or by individual requiring close supervision, including children
-
Use the Aero Garden Light only for its intended use as described in its instructions
-
Never operate the Aero Garden Light if it has a damaged cord or plug, if it’s not working properly, if it has been dropped and damaged, or if it has been dropped in water. If any of these conditions occur/exist, contact www.AeroGardenSupport.com or your country’s local distributor for instructions
-
Keep cord away from heated surfaces
-
Never operate furnishing with air openings blocked. Keep air openings free of lint, hair, and the like
-
Never drop or insert any object into any electrical openings
-
Do not use outdoors
-
Do not operate where aerosol (spray) products are being used or where oxygen is being administered
-
Do not touch moving parts, or hot parts, such as pumps, lights, reflective surfaces, and the like
-
To disconnect, remove plug from outlet
-
Do not place or submerge base, cord, plug, or light hood in water or other liquid to clean it
-
Do not allow water to contact hot LED Grow Light
-
Use only approved and supplied parts and accessories. Use of any other kind of accessory is not recommended. Replacement parts can be ordered from AeroGarden.com
-
Do not use the Aero Garden light for other than its intended purpose
-
This product is intended for household and residential use only. This product is not approved for commercial applications
-
If supply cord is damaged, it must be replaced by manufacturer, its service agent, or similarly qualified technician in order to avoid hazard
-
Electrical wiring must be in accordance with local regulations
-
This appliance is not intended for use by persons (including children) with reduce physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of appliance by a person responsible for their safety
-
Children should be supervised to ensure that they do not play with the appliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 0) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
WHAT IS COVERED – This warranty covers any defects in materials or
workmanship, with the exceptions stated below.
HOW LONG COVERAGE LASTS – This warranty runs for one (1) year on the LED
Grow Light from the date of original purchase, for the original
purchaser/user.
WHAT IS NOT COVERED – The warranty shall not apply to problems arising
from: normal wear; failure to adhere to enclosed operating instructions;
serial numbered products if the serial number has been removed or defaced;
products subject to negligence, accident, improper use, maintenance or
storage; products damaged by circumstances beyond Aero Grow International
Inc.’s control; loss or damage to removable parts; or products modified
(including, but not limited to, modifications through the use of unauthorized
parts or attachments) or repaired by anyone other than Aero Grow
International, Inc., or its designee. This warranty excludes all incidental or
consequential damages.
WHAT AEROGROW WILL DO – Aero Grow International, Inc., at its option,
will repair any defect in materials or workmanship or will replace this
product with ones of similar features and price. Aero Grow International,
Inc.’s sole obligation and your exclusive remedy under this warranty shall be
limited to such repair or replacement.
TO RETURN THIS PRODUCT – For any questions or concerns, or for more
information, visit our website at
www.aerogarden.com. Our customer service
representatives are available via Live Chat and Email. Please do not return
any product without contacting Aero Grow for return authorization.
Unauthorized returns, as well as C.O.D. shipments, will be refused. For more
information regarding returns, please see the
Returns section at www.AeroGarden.com
Due to continuing improvements, actual product may differ slightly from the
product described herein. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or exclusion
may not apply to you. This warranty gives you specific legal rights, and you
may have other legal rights that vary from state to state.
Tabletop Grow Light
Quick Start Guide
We Got What You Need!
Growing your favorite houseplant indoors has never been easier. With our innovative grow lights you can customize to your plants needs with our app.
Tabletop Grow Light
Assembly Instructions
- Insert bottom of post into base. Turn base upside down and, using a Phillip’s head screwdriver (not included), lightly screw in the post with the two screws provided. Do not overtighten.
- Once installed, turn the base side up and screw the LED light hood into the top of the post. Tighten gently.
- Connect the power cord adapter to the receiver at the bottom of the post and plug in to start your 10-hour ON light cycle.
- Touch the top of the light hood to manually turn on/dim/off your light. For more custom features (like Light Modes, custom light schedule, and more), download the Aero Garden app on Apple or Google Play app stores.
TIPS and TRICKS
- For best results, maintain about 4” of space between your hood and the top of your plant.
- To reset your light cycle, unplug and plug back your grow light.
- Aero Garden Grow Lights provide customization for your plants. Experiment with light cycles, color modes, and dimming levels that work for you and your plants.
- To reset the light cycle, unplug and plug back in your grow light. Wink, wink! you can unlock full customization using the Aero Garden App.
Additional Settings on your App:
- Easy on/off
- Customizable 0-100% dimming
- Customizable on/off light schedule, including adjustable length of ON time
- Customizable sunrise/sunset setting that provides a gentle dimming of your grow light to simulate sunrise and sunset
- 4 light modes to choose from: full spectrum, white, warm, and cool
What’s Included
- LED light hood
- Post
- Power cord & adapter
- Metal base
- (2) screws
Not included: Phillip’s head screwdriver
Good to Know
- Connect your grow light to the Aero Garden app (found on Apple and Google Play app stores) to unlock additional features.
- Your grow light will start its Light ON cycle the moment it is plugged in
- Preset light cycle is 10 hours ON and 14 hours OFF in a 24 hour cycle, turning on at the same time every day. More customization in the app
- Your grow light’s post is about 24 inches long when fully extended
- To avoid damage, do not collapse or extend your post by pulling or pushing by the LED hood
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>