luminii VINTAGE DIM 2 User Guide

: June 6, 2024
: luminii

Table of Contents

Download The App
OPTION 1: VINTAGEDIM® – WARM DIM SOLUTION
OPTION 2: TWO CHANNEL: INTENSITY AND CCT
OPTION 3: TWO CHANNEL: INDIVIDUAL CONTROL (WARM AND COOL CHANNELS)
OPTION 4: CUSTOM CURVE
READING PRESET FROM DRIVER
Troubleshooting
Read User Manual Online (PDF format)
Download This Manual (PDF format)

luminii VINTAGE DIM 2 User Guide

Download The App

Step 1: Download VintageDim® App from for Android OS or for iOS.
Step 2: Open the App and choose one of the factory pre-build presets:

1. VintageDim® Warm Dim
2. Two Channel: Intensity and CCT
3. Two Channel: Individual Control

OPTION 1: VINTAGEDIM® – WARM DIM SOLUTION

Step 1: Select “Create New Preset” button
Step 2: Select VintageDim® preset type.
Step 3: Change the preset name and description to your own.
Step 4: Set the CCT values of your light source or choose from preset Fixture CCTs option.
Step 5: Adjust sliders for maximum and minimum CCT at the bottom of the screen. This calculates the correct curve using the values you set in this section.
Step 6: Save preset.
Step 7: Select your new user preset from the main list.
Step 8: Press Program button.
Step 9: Place phone directly on the VintageDim® module. Phone will play a tone when programming begins. Programming is complete when you hear a single beep and see the “Programming Successful” screen.
If the driver was off during programming, simply power on and the driver will work according to the new program. If the driver was on during programming it will need to be power cycled for new programming to become active.

OPTION 2: TWO CHANNEL: INTENSITY AND CCT

Step 1: Select “Create New Preset” button.
Step 2: Select “Two Cnannel: Intensity and CCT” preset type.
Step 3: Change the preset name and description to your own.
Step 4: Set the CCT values of your light source or choose from preset Fixture CCTs option.
Step 5: Set intensity and CCT limits:
Value 1 – Desired Intensity Range
Value 2 – Desired CCT Range

Take Note: There are four values that
needs to be adjusted.
Step 6: Save preset.
Step 7: Select your new user preset from the main list.
Step 8: Press Program button.
Step 9: Place phone directly on the VintageDim® module. Phone will play a tone when programming begins. Programming is complete when you hear a single beep and see the “Programming Successful” screen.
If the driver was off during programming, simply power on and the driver will work according to the new program. If the driver was on during programming it will need to be power cycled for new programming to become active.

OPTION 3: TWO CHANNEL: INDIVIDUAL CONTROL (WARM AND COOL CHANNELS)

Step 1: Select “Create New Preset” button.
Step 2: Select “Two Channel: Individual Control “preset type.
Step 3: Change the preset name and description to your own.
Step 4: Set the CCT values of your light source or choose from preset Fixture CCTs option.
Step 5: Set intensity and CCT limits:
Value 1 – Desired Channel 1 Intensity Range
Value 2 – Desired Channel 2 Intensity Range
Take Note: There are four values that needs to be adjusted
Step 6: Save preset.
Step 7: Select your new user preset from the main list.
Step 8: Press Program button.
Step 9: Place phone directly on the VintageDim® module. Phone will play a tone when programming begins. Programming is complete when you hear a single beep and see the “Programming Successful” screen.
If the driver was off during programming, simply power on and the driver will work according to the new program. If the driver was on during programming it will need to be power cycled for new programming to become active.

OPTION 4: CUSTOM CURVE

Step 1: Select “Create New Preset” button.
Step 2: Change the preset name and description to your own.
Step 3: Set the CCT values of your light source or choose from preset Fixture CCTs option.
Step 4: Tap into the dim curve editing window.
Step 5: Select the dots on the intensity curve blue line and drag them into the desired position. The X Axis is control voltage and the Y axis is intensity. Repeat for each plot point on the line until the desired curve is achieved.
Use the toggle in the upper right corner to switch to the CCT curve. Drag each plot point on the red line to the desired positions. This time the Y axis indicates CCT.
Once the desired curves are set, tap the Save button in the upper right corner, then tap the Save button in the upper right corner again to save the preset.

Note: Double-click on the dots to enter values manually.
Step 6: Select your new user preset from the main list.
Step 7: Press Program button.
Step 8: Place phone directly on the VintageDim® module. Phone will play a tone when programming begins. Programming is complete when you hear a single beep and see the “Programming Successful” screen.
If the driver was off during programming, simply power on and the driver will work according to the new program. If the driver was on during programming it will need to be power cycled for new programming to become active.

READING PRESET FROM DRIVER

Step 1: Select Read Preset From Driver button.
Step 2: Place phone directly on the VintageDim® module. Reading is complete when you see the following confirmation
on screen.
Step 3: After successful reading you will see new user preset created with corresponding name and description.

Troubleshooting

Your device isn’t compatible with this version.
Double check if your phone supports NFC function. The NFC function is required to program the module.

Program didn’t take or didn’t take correctly.
Power down the module and power back up. If it still doesn’t work try programming the module again.

Range is not what I expected.
Double check that your fixture CCTs match your light source specs. Also, verify that you have set the CCT range as intended.

Lost power to the job site.
The program in the driver will work as normal when power is restored.