SOLIGHT WM-50W-RE LED Spotlight Instruction Manual
- September 16, 2024
- Solight
Table of Contents
WM-50W-RE LED Spotlight
“`html
Specifications
- Luminous flux: 5000lm*
- Power: 50W
- Chromaticity: 4000K
- Light source: 100x LED SMD2835
- Batteries: Li-Ion (12000mAh, 3.7V)
- Battery life: min. 2h/max. 10h
- Battery charging time: about 10h
- LED lifetime: 20,000 hours
- Coverage: IP54
Product Description
The portable LED spotlight includes the following
components:
- Spotlight
- Handle
- LED panel
- Stand
- USB-C charging cable
- Wing nut for fixing the tilt
- Charging indicator
- Battery status button
- USB-C socket cover
- ON/OFF button
- USB-C charging socket
Product Usage Instructions
Safety Notice – Positioning of the Reflector
-
Using the handle, place the product on a flat and stable
surface. -
Fold out the LED panels.
-
Tighten the screws to secure the pivot when the desired
position is reached.
Operation of Equipment
The device can be operated in different modes by pressing the
ON/OFF button:
- 1st Press: 100% illumination
- 2nd Press: 50% illumination
- 3rd Press: 20% illumination
- 4th Press: Off
Charging Instructions
-
Open the cover of the USB-C charging socket and connect the
supplied charging cable. -
Connect the charging cable to a 5V, max. 2A AC adapter and plug
it into a power outlet. -
All indicator lights start flashing during charging; they
remain on continuously when fully charged.
Maintenance and Storage
Do not use chemicals for cleaning; use a dry, lint-free cloth.
Clean only when switched off and disconnected. Store in a dry place
inside its packaging. Charge for two hours every 4 months to
maintain battery capacity.
Frequently Asked Questions (FAQ)
Q: Can the light source be replaced?
A: The light source is non-replaceable; replace the entire
luminaire at the end of its service life.
Q: How should I store the device when not in use?
A: Store the device in a dry place inside its packaging to
ensure longevity.
“`
EN WM-50W-RE LED spotlight
Thank you for purchasing our portable LED spotlight. Please read this manual carefully and heed the safety warnings and instructions before installing, using or repairing the unit. Doing so will ensure not only the protection of persons, but also the longevity of the equipment.
TECHNICAL PARAMETERS
Luminous flux
5000lm*
Power
50W
Chromaticity
4000K
Light source
100x LED SMD2835
Batteries
Li-Ion (12000mAh, 3.7V)
Battery life
min. 2h/max. 10h
Battery charging time
about 10h
LED lifetime
20.000 hours
Coverage
IP54
- maximum luminous flux is achieved at full charge
DESCRIPTION OF EQUIPMENT
1. Spotlight 2. Handle 3. LED panel 4. LED panel 5. Stand 6. USB-C charging cable 7. Wing nut for fixing the tilt 8. Charging indicator 9. Battery status button 10. USB-C socket cover 11. ON/OFF button 12. USB-C charging socket
SAFETY NOTICE
– Fully charge the batteries before starting the device for the first time. –
The device is not intended for children. – If the device is damaged, do not
continue to use it. – Neither the manufacturer nor the distributor shall be
liable for any damage caused by improper use of the product. – Do not repair
or modify the equipment, all repairs must only be carried out by the
manufacturer’s service centre. – Do not open the cover or otherwise interfere
with the construction of the product. – Keep the device away from: open
flames, hot surfaces and flammable materials. – Place the device at least 0.1m
from the object to be illuminated. – Do not cover/uncover the product while
charging, as this creates a risk of overheating. – Keep the batteries out of
the reach of children. – The battery is not replaceable, in the event of a
failure the entire device must be disposed of at a designated location.
POSITIONING OF THE REFLECTOR
You can adjust the position of the device vertically and horizontally. 1.
Using the handle (2), place the product on a flat and stable surface. 2. Fold
out LED panels (3) 3. When the desired position is reached, tighten the screws
to secure the pivot. Tighten the pivot screws when the adjustment is complete.
OPERATION OF EQUIPMENT
The device can be operated in different modes. These can be selected by
repeatedly pressing the ON/OFF button (11). 1. Press: 100% illumination | 2.
Press: 50% illumination | 3. Press: 20% illumination | 4. Off.
Charging:
Open the cover (10) of the USB-C charging socket and connect the supplied
charging cable to the socket (12). Connect the charging cable to a 5V, max. 2A
AC adapter (not included) and plug it into a power outlet. (It is not possible
to switch on the reflector while it is charging. Always charge in a dry
place.)
When charging, all the indicator lights (8) start flashing. The battery is
fully charged when all the indicator lights are on continuously. NOTE: After
charging is complete, be sure to reattach the USB input cover (10) to protect
the reflector from moisture and to ensure protection against splashing water.
Off/on:
Press the ON/OFF button (11) to switch the device on/off.
Maintenance and storage:
Do not use chemicals for cleaning. Use a dry, lint-free cloth. Clean only when
the product is switched off and disconnected. When not in use, store the
device in a dry place inside its packaging. To maintain the capacity of the
rechargeable battery, the device needs to be charged for two hours every 4
months.
The light source of this luminaire is non-replaceable, at the end of its
service life the entire luminaire must be replaced and disposed of in a
designated place. This product contains a light source that for design reasons
cannot be removed for verification and therefore the entire product is
considered a light source.
Solight Holding, s.r.o., Na Brn 1972, Hradec Králové 500 06, Czech Republic.
3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>