inateck BCST-55 2D Wireless Bluetooth Barcode Scanner User Guide
- June 3, 2024
- inateck
Table of Contents
inateck BCST-55 2D Wireless Bluetooth Barcode Scanner
Product Illustration
This is only a brief version of the BCST-55 instruction manual. Please feel free to contact us If you have any trouble configuring BCST-55 such as adding/deleting a prefix/suffix. We are always at your service.
How to setup
Connect the scanner to a computer via the USB cable for charging or data
transfer.
Frequently Used Barcodes
Note:
- Function Setting Steps: “Enter Setup” Exit” Low Volume” “Save and
- Those marked with e) in the manual indicate default settings.
Use of BCST-55
Connection Wireless Adapter Mode
Plug the USB adapter into a computer and the LED indicator will flash once,
indicating that the connection is successful. Short press the trigger on the
scanner and it will emit a red beam. Then, the barcode scanner can work under
wireless adapter mode.
Note: If you receive an error during data transfer via the wireless
connection, please scan the setting barcodes in sequence to reconnect the
scanner to the adapter: “Enter Setup” “Wireless Adapter Mode” “Save and Exit”.
Charging
Connect the scanner to a computer/charger directly via the included USB cable
to charge it.
Setting
System Setting
Inventory Mode
Users may use the inventory mode to keep the scanned barcodes in the cache of
BCST-55 and upload them to a computer in batches. Under inventory mode, users
are not restricted to the time or location when uploading data. In addition,
historical data can be cleared in the cache. More details about inventory mode
are as below.
Note:
It is not necessary to scan “Enter Setup” or “Save and Exit” when scanning the
5 barcodes below. Simply scan the barcodes to activate the
functions.
Status Indicator
Product Specification
Package List
- BCST-55 1
- USB Cable 1
- User Guide 1
- Wireless Adapters 1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>