ROBUS RCD1080-04 Doorbell Connect WiFi with 1080P Camera Installation Guide

DOORBELL CONNECT WIFI,
WITH 1080P CAMERA
RCD1080-04

https://www.ledgrouprobus.com/catalogue/smart-lighting

Product Configuration

Accessories Components

Installation Pictogram

DOORBELL CONNECT, WIFI, WITH 1080P
CAMERA, 2-WAY AUDIO, IP44, BLACK

PLEASE READ THE INSTRUCTIONS BEFORE COMMENCING INSTALLATION AND RETAIN THEM FOR FUTURE REFERENCES.
! Electrical products can cause death or injury, or damage to property.
If in any doubt about the installation or use of this product, consult a competent electrician
Note:
Product technical information and specification may change over time without prior notification. For the latest technical information, please

Power supply: AC/ DC 12V~24V; WIFI 2.4GHz only
Indicator status:

1. Red LED On: Camera or network fault
2. Red LED Flashing: Awaiting WIFI connection
3. Blue LED On: Camera Normal Operation
4. Blue LED Flashing: Connecting

SD Card: Supports local SD card storage (Max.128GB/ not included).
Reset: Press the reset button for 5s to reset the doorbell。

Installation

1. Ensure supply is switched off before commencing work.

2. Mark appropriate fixing hole positions on wall or door frame, check the location of buried cables before drilling.

3. Feed the power cables through the base plate, fix the base plate using screws supplied as per figure 2. (angle bracket also supplied as per figure 3).

4. Connect the power cables to the terminals (polarity is not important)

5. Attach the doorbell to the base plate, and insert screws.
   Pair via ROBUS CONNECT App: Follow instructions in the App.

6. Download ROBUS CONNECT App from ROBUS website: register and login to the App.

7. Enter pairing mode by pressing the reset button for 5s

8. Add device and choose Smart Camera and follow instructions on the App

Note: Ensure router, smartphone and camera are as close as possible when Pairing

Information for the Product user:

1. Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with crossed-out wheelie bin symbol).
2. Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection center for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
3. This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is separated from normal household waste and recycled in the WEEE chain
4. The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be disposed of according to local WEEE regulations

The Installation must be carried out by a qualified electrician

LED Group
Western Retail Park
Nangor Road
Dublin 12 D12 E7VP
Ireland| Tel: +353 1 7099000
Fax: +353 1 7099060
Email: info@robus.com
Website: www.robus.com
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>