OKIN CB1522 Control Box Instructions
- June 6, 2024
- OKIN
Table of Contents
CB1522 Function instruction
Electrical configuration diagram：
Function Picture
Process of test
1.1. HEAD MOTOR
Connect to head actuator, control by a remote single: Click the head-up
button on the remote, the head actuator moves out, stop when released Click
head down button the head actuator moves in, stop when released； This function
takes effect only by pressing the corresponding button on the remote.
1.2. FOOT MOTOR
Connect to foot actuator, control by a remote single: Click foot up button，
foot actuator moves out， stop when released； Click the foot down button， the
foot actuator moves in， stops when released； This function takes effect only
by pressing the corresponding button on the remote.
1.3. Massage
Connect to head & Foot massage, control by remote:
Click head massage + button, head massage strengthens by one level;
Click head massage – button, head massage weaken by one level;
This function takes effect only by pressing the corresponding button on the
remote.
1.4. Test for under bed light
Click the button of under bed light turns on( or turns off ) the under bed
light, switch the status once when clicking once ； This function takes effect
only by pressing the corresponding button on the remote.
1.5. SYNC port
Connect with the same other Control box or Other accessories;
1.6. Power LED & PAIRING LED
Power supply for control box, PAIRING LED of the control box is blue, POWER
LED is green。
1.7. Power
Connect to the 29V DC;
1.8. RESET button
Press and hold the RESET button， the Head, Foot actuators will move to the
lower position.
1.9. Pair Function
Double click RESET button， pairing LED turns on， the control box enters into
the mode of code paring； Press and hold the pairing LED of Remote, the
backlight of paring LED flashes, the backlight of remote flashes, the remote
enters into the mode of code paring; The backlight of paring LED of remote
stops flashing, and the paring led of control box turns off, it indicates that
the code paring is successful; If fails, repeat all the processes above;
1.10. FLAT function
Press and release the FLAT button on the remote， the head and foot actuators
move to lower position(when the actuator is free, can turn off the vibration
motor and turn off the indicator light when press once )， stop when pressing
any button； This function takes effect only by pressing the corresponding
button on the remote.
1.11. ZERO-G position function
Press and release the ZERO-G button on the remote， the head and foot actuator
moves to the preset memory position， stopping when pressing any button； This
function takes effect only by pressing the corresponding button on the remote.
1.12. Bluetooth function
Use the APP to connect Bluetooth to control the control box. For details, see
FCC Warning ：
Please take attention that changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two
| Issue department: Bedding Division| Date: 1 2017-08-23
---|---|---
Product Function
instruction| Author:| Kyle
No: CB1522
CB.15.22.01| Version:| 11.
Page 5 of 5
conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
ISED RSS Warning:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>