BEGA 85 192 UniLink Play Garden Floodlight Instruction Manual
- September 3, 2024
- BEGA
Table of Contents
BEGA 85 192 UniLink Play Garden Floodlight
Specifications
- Lamp Module Connected Wattage: 2.9 W
- Luminaire Connected Wattage: 3.6 W
- Rated Temperature: 25-65 °C
- Ambient Temperature: max 48 °C
- Voltage: 48 V = DC
- Module Designation: LED-1389/830
- Colour Temperature: 3000 K
- Colour Rendering Index (CRI): > 80
- Module Luminous Flux: 525 lm
- Luminaire Luminous Flux: 392 lm
- Luminaire Luminous Efficiency: 108.9 lm / W
Product Usage Instructions
Safety:
The installation and operation of this luminaire are subject to national
safety regulations. The manufacturer accepts no liability for damage caused by
improper use or installation. If subsequent modifications are made to the
luminaire, the person responsible for these modifications shall be considered
the manufacturer.
Installation
- Press the luminaire with earth spike vertically into the soil until stability is achieved. Compact soil around the earth spike if necessary.
- Maximum wattage for luminaires connected to the power supply unit 71 321 is 100 W.
- When the power supply unit is fully loaded, ensure the maximum cable length between the luminaire and the power supply unit does not exceed 100 m.
- Insert the plug of the floodlight into the plug contact of the power supply unit, Smart Link, distribution box, or extension cable and hand-tighten. Do not use tools for tightening or loosening screw connections.
Maintenance:
Check the connecting cable for external damage regularly and have it
replaced by a qualified electrician if needed.
FAQ
-
Q: What should I do if the luminaire is not stable in the soil after pressing it in?
A: If the luminaire is not stable, try compacting the soil more firmly around the earth spike to achieve stability. -
Q: Can I use tools to tighten the screw connections?
A: No, it is recommended not to use tools for tightening or loosening the screw connections to avoid damage to the luminaire or power supply unit.
Garden floodlight BEGA UniLink® Play
Dimension
Instructions for use
Application
Portable garden floodlight BEGA UniLink® Play with infinitely adjustable
mounting height and 2 m connecting cable with plug connector. For the
effective illumination of plants and smaller trees or objects in private
gardens. Connecting the floodlight requires a power supply unit (71 321),
which must be ordered separately.
In addition, by combining with the Smart Link 71 327, the floodlight and other
UniLink® Play luminaires of this power path can be conveniently switched and
dimmed via the free BEGA Smart app.
BEGA UniLink® Play is a system for smart garden lighting that is controlled
via app, remote control or automation.
All connection cables and components are installed above ground in the area of
use. Thanks to the IP 67 standard, they are weather-resistant year-round and
highly durable.
After successful electrical connection, they can be configured in the BEGA
Smart app.
Lamp
- Module connected wattage 2.9 W
- Luminaire connected wattage 3.6 W
- Rated temperature ta = 25 °C
- Ambient temperature ta max = 65 °C
- Voltage 48 V = DC
85 192 K3
- Module designation LED-1389/830
- Colour temperature 3000 K
- Colour rendering index CRI > 80
- Module luminous flux 525 lm
- Luminaire luminous flux 392 lm
- Luminaire luminous efficiency 108,9 lm / W
Light technique
Broad spread light distribution.
Half beam angle 66°
Product description
- Luminaire housing made of cast aluminium
- BEGA Unidure® coating technology
- Colour graphite
- Vertical tube aluminium anodised
- Polymer lens
- Floodlight horizontally adjustable by 360°, tilt adjustable by ± 90° and infinitely vertically adjustable
- Tool-free plug-on shield made of synthetic
- material, rotation range -60°/+60° 2 m connecting cable with BEGA UniLink® Play plug
- Protection class IP 67 when plugged in and screwed in place
- Luminaire housing:
- Safety class III
- Protection class IP 65
- Dust-tight and protection against water jets
- Impact strength IK07
- Protection against mechanical impacts < 2 joule
- – Conformity mark
- Weight: 0.45 kg
- This product contains light sources of energy efficiency class(es) Dd
Safety
The installation and operation of this luminaire are subject to national
safety regulations.
The manufacturer accepts no liability for damage caused by improper use or
installation. If subsequent modifications are made to the luminaire, the
person responsible for these modifications shall be considered the
manufacturer.
Installation
- Press the luminaire with earth spike vertically into the soil until stability is achieved. If necessary, compact soil around the earth spike.
- The maximum wattage for the luminaires connected to the power supply unit 71 321 is 100 W.
- When the power supply unit is fully loaded, the maximum cable length between the luminaire and the power supply unit must not exceed 100 m.
- Insert the plug of the floodlight into the plug contact of the power supply unit, Smart Link, distribution box or extension cable and hand-tighten.
- Do not use tools for the tightening or loosening of the screw connections.
Adjusting the floodlight:
After unscrewing the knurled nut, the luminaire head can be infinitely
adjusted in height and horizontally adjusted by 360°.
In addition, the floodlight can be tilted ± 90°. Undo the hexagon socket
screws (wrench size 2) and set the desired beam angle. Tighten the hexagon
socket screws evenly.
Cleaning · Maintenance
- Clean dirt and debris from the luminaire regularly with a clean, soft, lint-free cloth that is kept damp throughout the cleaning.
- If possible, please use water for this, adding a little commercial dishwashing detergent.
- For lacquered surfaces we recommend the use of BEGA Lacquer Care Set 71 179.
- Cleaning agents containing solvents and high-pressure cleaners are unsuitable for cleaning and maintenance.
Maintenance
The connecting cable must be checked for external damage and may only be
replaced by a qualified electrician.
Replacing the LED module
- The designation of the LED module is noted on a separate label in the luminaire or on the underside of the specific LED module.
- The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
- The module can be replaced by qualified persons using standard tools.
- Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
- Inspect and, if necessary, replace the luminaire gaskets.
- Defective glass must be replaced.
- Close the luminaire.
Accessories
- 71 321 BEGA UniLink® Play power supply unit Primary: 220 V-240 V y 50/60 Hz Secondary: 48 V DC · 0-100 W
- 71 322 BEGA UniLink® Play Extension cable 5 m
- 71 323 BEGA UniLink® Play Extension cable 10 m
- 71 324 BEGA UniLink® Play Extension cable 20 m
- 71 325 BEGA UniLink® Play Five-way distribution box
- 71 326 BEGA UniLink® Play Two-way distribution box
- 71 327 BEGA UniLink® Play Smart Link
For the accessories a separate instructions for use can be provided upon request