Ansell UKES Disco EVO 2 9 16W CCT Selectable White LED Bulkhead Self Test Emergency Instruction Manual

Ansell UKES Disco EVO 2 9 16W CCT Selectable White LED Bulkhead Self-Test

Emergency

Installation Instructions

The document provides multilingual installation instructions and warranty information for Ansell Lighting products. It includes both textual guidelines and visual diagrams to assist with the installation process.

Warranty Information

website: www.anselluk.com
FR| Pour connaître les détails de la garantie, veuillez contacter votre représentant local ou consulter notre site Internet www.anselluk.com

Specifications

Installation Process

1. Tools Required (Not Supplied)  – Illustrations show a drill, hammer, screw, wall plug, and their respective sizes for different wattage models.
2. Product Cut-Out Dimensions  – Provides cut-out dimensions for different wattage models: 10W: 32mm, 20W: 62mm, 30W: 63mm, 50W: 103mm.
3. Opening the Fixture  – Diagrams show the steps to open the fixture and prepare it for installation.
4. Installation of the Fixture  – Step-by-step visual guidance on installing the fixture into a wall.
5. Wiring Instructions  – A diagram depicts the wiring connections with labels L (Live) and N (Neutral).
6. Sensor Settings – The diagram shows the settings for the sensor sensitivity (SENS), light level (LUX), and time duration (TIME).
7. Resetting the Fixture  – Instructions on how to reset the fixture by turning it off and on in a specific sequence.

FAQ

• How can I contact Ansell for warranty details?
  • You can contact your local representative or visit www.anselluk.com for warranty information.
• What tools are required for installation?
  • Tools not supplied with the product include a drill, hammer, screws, and wall plugs. Specific sizes are provided in the installation instructions.
• How do I reset the fixture?
  • The fixture can be reset by turning it off and then on twice within 3 seconds.
• What are the recommended installation heights for the sensors?
  • The recommended installation height for the sensors is between 1 meter and 3 meters.

Warranty Information

• For warranty details please contact your local representative or visit our website: www.anselluk.com It is highly recommended that all
• Ansell luminaires are installed/maintained by a fully qualified electrician and wired in accordance to the latest IEC standards or national equivalent.
• The main power must be switched off during any installation or maintenance. Should the product fail during the warranty period, Ansell will repair  or replace the product in question.
• Ansell do not accept any responsibility for any installation costs associated to the replacement of this product.

“Please Note – The warranty period shall be null and void in the following circumstances: Failure by the installer, end user or any third party to exercise caution to protect any covered product or part from outside damage, adverse temperature, humidity conditions, fluctuations in the electrical system or physical abuse as well as failure related to poor workmanship in the installation of the products or parts. Inability to provide correct product information. Any questions or concerns with the product, please contact your local representative.”

• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
• The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.

Ansell Electrical Products Unit 6B, Stonecross Industrial Park, Yew Tree Way, Wanington, WA33JD

• Warrington Tel: +44 (0)1942 433333
• Belfast Tel: +44 (0)2890 773750
• International Tel: +44 (0)1942 433343
• Spain Tel: 00 34 938 005642

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>