YANXING FIT RC1 Smart LED Jump Rope User Manual

FIT RC1 Smart LED Jump Rope
User Manual

Product Introduction

Note: Please read this manual carefully before using the product and keep it properly.

Remark:

1. Top cover
2. Type-C charging port
3. Main housing
4. Power button
5. Mode shift button

Basic Parameter

Product Name: Smart Jump Rope
Model No.: RC1
Material: Handle bar ABS, Rope PVC
Product Weight: Single handle bar 50g
Handle Size: 153.5*26.5mm
Rope Size: 3M, diameter 5mm
Maximum record: 9999
Input Voltage: 5V, 200mA
Battery Capacity: 300mAh
Connector Type: Type-C
Power Supply: Rechargeable Li-ion battery
Working Temperature: -10～45°C

Installation Method

1. Rope passes through the closed round hole of the buckle first, and then through the hole on the top cover of the handle.
2. Rotate the rope and pass through the hole on the other side of the cover on the top of the handle.
3. When rope inserted into or passed through the hole of the buckle, one handle and rope assembly finish. The fixed position of the buckle can be adjusted according to your own usage habits. Just complete the assembly of the handle and rope on the other side as instruction.

Operation Instruction

1. Power button
   ① Hold power button for 2s, display “88:88”means power on successfully.
   ② Hold power button for 3s, display “OFF” means power off successfully.
   ③ Short press power button, display current remaining power“—-”
   ④ Short press power button 2 times to reset data to 0.

2. Mode Shift button
   ① Short press shift button to select countdown time, “01:00”, “02:00”or “03:00”.

3. Button Shift
   ① Countdown mode: When countdown finish, reset countdown mode by short press power button 2 times.
   ② Countdown mode: When countdown not finish, reset countdown mode by short press power button 2 times.
   ③ Free exercise mode: When start or finish jumping, change between exercise time and skipping numbers mode by short press mode shift button.

Install Smart Life App

Scan the QR code with your mobile phone, or search for Smart Life in the app market, download and install the App.
**** If your mobile phone has downloaded Tuya smart App, please make sure that the App version is the latest.

https://smartapp.tuya.com/smartlife

Connect Device

1. Connect your mobile phone to home wireless network.
2. After scale power on, it enter Bluetooth pairing connection mode by default.
3. Click Tuya smart App on your phone, when using it for the first time, please register/log in to your account according to the app guidelines.
4. Go to the home page of the App, click “+” and select “Auto Discovery”, the App will search for the smart device to be configured, and add the device according to the App interface prompts.
   **** If the device is not found, click “Add manually” at the top of the scan page, and manually add the device according to the interface prompts.

Caution

• This product is not waterproof, please do not use it outdoors in rain.
• To avoid damage, pay attention to plugging and unplugging when charging.
• When wiping the handle, use a dry cloth, do not get wet.
• Please carefully evaluate your own condition before skipping and do a warm-up exercise.
• Keep the product out of reach of infants and young children.
• This product cannot be used while charging. After charging is complete, unplug the charger. Do not charge all the time.
• When not in use, place it in a dry and ventilated place, and keep it away from heat sources or liquid areas.

Note: Please read this manual carefully before using the product and keep it properly.
FCC regulatory conformance ：
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the  user’s authority to operate the equipment.
RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>