AICOK KE01302C-GS Plastic Kettle Instruction Manual
- June 13, 2024
- AICOK
Table of Contents
AICOK KE01302C-GS Plastic Kettle
Product Information
- Product: Plastic Kettle
- Model: KE01302C-GS
- Manufacturer: Shenzhen Impression E-commerce Co.,Ltd
- Website:www.aicok.cc
Important Safety Instructions
- Read all instructions before using.
- Before connecting the kettle to the power supply, ensure that the voltage matches the rating mentioned on the kettle.
- Keep the kettle away from children and individuals with physical, sensory, or mental limitations, unless they are supervised or given proper instructions on safe usage.
- Do not touch the hot surface of the kettle. Use the handle or buttons provided.
- The attached base should only be used for its intended purpose.
Know Your Electric Kettle
- Kettle spout
- Kettle lid
- Lid release button
- Water level gauge
- Body
- Handle
- Switch (with indicator)
- Power base
Before Using Your Kettle
If you are using the kettle for the first time, it is recommended to follow these steps:
- Clean the kettle before use by boiling the maximum capacity of water once and then discarding the water twice.
- Wipe the surface with a damp cloth.
Note: The maximum capacity of the kettle is 1.7L.
Using Your Electric Kettle
- Fill the kettle with water up to the desired level using the water level gauge.
- Place the kettle on the power base and ensure it is securely connected.
- Press the switch to start boiling the water.
- Once the water has boiled, the kettle will automatically switch off.
- Use caution when handling the hot kettle. Hold it by the handle.
- Boil-Dry Protection
- The kettle is equipped with boil-dry protection. If you accidentally operate the kettle without water, it will automatically switch off to prevent damage. Allow the kettle to cool before refilling it with cold water and re-boiling.
- Cleaning and Maintenance
- To remove mineral deposits, descale the kettle periodically. Mineral deposits may form due to tap water usage.
- Environment Friendly Disposal
- Please follow local regulations and dispose of non-working electrical equipment at an appropriate waste disposal center to protect the environment.
IMPORTANT SAFETY INSTRUCTIONS
- Read all instructions before using.
- Before connecting the kettle to the power supply, check that the voltage indicated on the appliance(underside the kettle & base) corresponds with the voltage in your home. If this is not the case, contact your dealer and stop using the kettle.
- Do not let the cord hang over the edge of a table or counter or touch a hot surface.
- Do not place on or near a hot gas or electric burner or in a heated oven.
- Do not operate the appliance without anything in it to avoid damaging the heat elements.
- Ensure that the kettle is used on a firm and flat surface out of reach of children, this will prevent the kettle from overturning and avoid damage or injury.
- To protect against a fire, electric shock or personal injury, do not immerse cord, electric plugs or kettle in water or other liquids.
- While water is boiling, or just after the water has been boiled, avoid contacting with steam from the spout.
- Always take care to pour boiling water slowly and carefully without tipping the kettle too fast.
- Be careful of refilling when the kettle is hot.
- Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Do not touch the hot surface. Use the handle or the button.
- The attached base can not be used for other thanintended use
- Extreme caution must be used when moving an appliance containing hot water.
- The appliance is not a toy. Do not let the children play it.
- The kettle is for household use only. Do not use outdoors.
- The use of accessories, which are not recommended by the appliance manufacturer, may result in fire, electric shock or personal injury.
- Unplug the kettle from the outlet when not in use and before cleaning. Allow the kettle to cool before putting on or taking off parts, and before cleaning the appliance.
- To disconnect, turn any control to “off,” then remove plug from wall outlet.
- If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
- Do not use the appliance for other than intended use.
- The kettle can only use with the stand provided.
- If the kettle is overfilled, boiling water may spill out.
- Always ensure the lid is closed and do not lift it while the water is boiling. Scalding may occur if the lid is removed during the brewing cycles.
- This appliance can be used by children aged from 8years and above if they have been given supervision or instruction concerning use of the appliance in asafe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years.
- This appliance is intended to be used in house hold and similar applications such as:
- Staff kitchen areas in shops, offices and other working environments;
- Farm houses;
- By clients in hotels, motels and other residential type environments;
- Bed and breakfast type environments.
- Save these instructions.
KNOW YOUR ELECTRIC KETTLE
BEFORE USING YOUR KETTLE
If you are using the kettle for the first time, it is recommended that you
should clean your kettle before use by boiling the Max capacity of water once
and then discarding the water twice. Wipe the surface with a damp cloth.
NOTE: The max capacity of kettle is 1.7L.
USING YOUR ELECTRIC KETTLE
-
Place the kettle on the flat surface.
-
To fill the kettle, remove it from the power base and open the lid by pressing down lidrelease button, then fill the kettle with the desired amount of water and close the lid. The water level must be within the Min and the Max level. Too little water will cause the kettles witching off before the water has boiled.
- NOTE: Do not fill the water over the maximum level, as water may spill out of the spout when boiling. Ensure that the lid is firmly in place before plugging the power outlet.
-
Position the kettle on the power base.
-
Connect the plug into a power outlet. Press down the switch and the indicator will light up, and then the kettle starts to boil the water. The kettle will switch off automatically once the water has boiled. If necessary, it will take you 30 seconds to wait before pressing the switch again to re-boil the water. You may shut off the power by lifting switch up or directly lift the kettle from the power base at any moment to stop boiling process.
NOTE: Ensure that switch is free of obstructions and the lid is firmly closed, the kettle will not turn off if the switch if be constrained or if the lid is opening. -
Lift the kettle from the power base and then pour the water.
NOTE: Operate carefully when pouring the water from your kettle as boiling water may result in scald, besides, don’t open the lid while the water in the kettle is hot. -
The kettle will not re-boil until the switch is pressed again. The kettle may be stored on the power base when not in use.
NOTE: Always disconnect the power supply when not use.
BOIL-DRY PROTECTION
Should you accidentally let the kettle operate without water, the function of boil-dry protection will automatically switch off the power. If this occurs, allow the kettle to coolprior to filling with cold water before re-boiling.
CLEANING AND MAINTENANCE
Always disconnect the appliance from the power outlet and cool it down completely before cleaning.
- Never immerse the kettle, power cord or power base in water, or allow moisture to contact with these parts.
- Wipe the appearance of body with a damp cloth or cleaner, never use a poisonous cleaner.
- Remember to clean the filter at intervals. For easier cleaning, detach the filter by pressing down the tab of filter inside the kettle and then replace it after cleaning.
- CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to clean the out side of the kettle to prevent the gloss loss.
- When not use or storage, the power cord may be wind under the bottom of kettle.
REMOVAL OF MINERAL DEPOSITS
Your kettle should be periodically descaled as the mineral deposits in tap
water may form scale on the bottom of kettle so as to cause the operation less
efficiency. You can use thecommercially available descaler and follow the
instructions on the package of descaler. Alternatively, you may follow below
instructions using the white vinegar.
- Fill the kettle with 3 cups of white vinegar, then adding water to the amount so as to cover the bottom of kettle completely. Leave the solution in the kettle overnight.
- Then discard the mixture in the kettle, then filling the kettle with clean water to the maximum position, boiling and then discard the water. Repeat several times until the odorof vinegar has been flushes away. Any stains remaining inside the spout can be removed by rubbing with a damp cloth.
ENVIRONMENT FRIENDLY DISPOSAL
- You can help protect the environment!
- Please remember to respect the local regulations:hand in the non-working electrical equipments toan appropriate waste disposal center.
- Shenzhen Impression E-commerce Co.,Ltd
- Facebook Page: https//www.facebook.com/aicoks/
- Website: www.aicok.cc Add: Booth No.3H012, Trading Plaza, No.5, Huanancity,
- Pinghu Street, Longgang District, Shenzhen,China Made In China