OKIN RF401B Remote Control Instructions
- June 6, 2024
- OKIN
Table of Contents
Instruction of RF401B
1 Item
1.1 ZG button ①
Click the ZG button, the actuator moves to ZG position, stop when clicking
any button during the movement;
Press and hold the ZG button for 5s, timer LED of remote flashes, the control
box records current position as ZG position; When in the process of moving to
memory positions, the head and foot actuators move first, then the tilt and
lumbar actuators move ;
1.2 TV/PC button ⑥
Click TV/PC button, actuators move to TV/PC position, stop when clicking
any button during movement；
Press and hold TV/PC button for 5s, timer LED of remote flashes, the control
box records current position as TV/PC position; When in the process of moving
to memory positions, the head and foot actuators move first, then the tilt and
lumbar actuators move;
1.3 LOUNGE button ⑦
Click the LOUNGE button, actuators move to LOUNGE position, stop when
clicking any button during movement；
Press and hold LOUNGE button for 5s, timer LED of remote flashes, the control
box records current position as LOUNGE position;
When in the process of moving to memory positions, the head and foot actuators
move first, then the tilt and lumbar actuators move;
1.4Head up ②
Press and hold HEAD-UP button of the remote, the head actuator moves out,
stop when released；
1.5Head down ④
Press and hold the HEAD DOWN button of the remote, head actuator moves in,
stop when released ；
1.6Foot up ③
Press and hold FOOT UP button of remote, foot actuator moves out, stop when
released;
1.7 foot down ⑤
Press and hold FOOT DOWN button of remote, foot actuator moves in, stop when
released When moving to a flat position, lumbar actuator and tilt actuator
move first, after 500ms, head and foot actuators start moving;
1.8 Flat ⑧
Click F L AT button, the bed goes flat, stop when clicking any button during
the process of going flat ；
| Issue Department: Bedding Division| Date: 1 2021-7-20
---|---|---
System Instruction| Author:|
|
Instruction of RF401B| Edition:| I 1.1
Page| 2 of 4
FCC Warning：
Please take attention that changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. ISED RSS
Warning: This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.