ROBUS RTW0230RGL-24 Twilight 2W IP65 Linear Rectangular LED Wall Mounted Light Instruction Manual
- June 6, 2024
- ROBUS
Table of Contents
TWILIGHT 2W IP65 LINEAR RECTANGULAR
LED WALL MOUNTED LIGHT, GREY
RTW0230RGL-24
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR
FUTURE REFERENCES.
! Electrical products can cause death injury or damage to property.
If in any doubt about the installation or use of this product, consult a
competent electrician
Note:
Product technical information and specification may change over time without
prior notification. For the latest technical information please
visit our web site www.robus.com or
robusdirect.com
-20°C < Ta < +50°C, 220-240V ~ 50/60Hz, Class II, IP65 Luminaire is non-dimmable
Suitable for mounting on a normally flammable surface
Installation
- Ensure mains supply is switched off before commencing work
- Select a suitable location for luminaire
- Using a flat-head screwdriver remove the trim.
- Expose the base by removing the screws. Remove diffuser
- Mark appropriate fixing hole positions on the wall, check the location of buried cables, pipes, and other building services before drilling
- Feed supply cables through cable entry hole and attach the base to the surface
- Connect the supply to terminals Brown to L and Blue to N
- Attach the diffuser to the base. Tighten screws. Attach trim Market Surveillance:
These products contain light sources ‘LS Code’ of energy efficiency of Class F.
RTW0230RGL-LS
Remove screws and remove the diffuser. Remove LED PCB
Information for the Product user:
-
Please note the requirement to dispose of Waste Electrical & Electronic
Equipment separately from household waste (WEEE marked with crossed-out wheelie bin symbol). -
Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection center for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
-
This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is separated from normal household waste and recycled in the WEEE chain
-
The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be disposed of according to local WEEE regulations
The Installation must be carried out by a qualified electrician
L.E.D lighting & Electrical Distribution Group UC
IRE: Nangor Road, Dublin 12, D12 E7VP, Ireland
UK: Bracknell Enterprise & Innovation Hub, Ocean
House, 12th Floor, The Ring, Bracknell,
Berkshire RG12 1AX, UK
Tel: +353 1 7099000
Fax: +353 1 7099060
Email: info@robus.com
Website: www.robus.com Issue 2 090821
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>