ROBUS REA1340-01 Elegance 13w/18w IP54 LED Non-Dimmable Instruction Manual
- June 6, 2024
- ROBUS
Table of Contents
ROBUS REA1340-01 Elegance 13w/18w IP54 LED Non-Dimmable
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE
REFERENCES.
Electrical products can cause death or injury, or damage to property. If in
any doubt about the installation or use of this product, consult a competent
electrician
Note:
Product technical information and specification may change over time without
prior notification. For the latest technical information please visit our web
site www.robus.com or
robusdirect.com
-25°C < Ta < +40°C, 220-240V ~ 50/60Hz, Class II, IP54 Suitable for mounting on a normally flammable surface.
Installation
- Ensure mains supply is switched off before commencing work.
- Ensure there is a minimum of 100mm of free space around the luminaire location
- Remove terminal cover and the metal bracket from base of the fitting (Fig. 2)
- Mark appropriate fixing hole positions, check location for buried cables, pipes and other building services before drilling.
- Wall mounting: Please ensure bracket is horizontal position And the drain hole is at the bottom (see label).
- Attach bracket. Ensure it is secure (Fig. 3).
- Connect supply cables Live and Neutral to fitting terminals (Fig. 4).
- Refit the cover. For added cable support please use cable grip.
- Attach fitting to the bracket and ensure it is secure (Fig. 5).
Market Surveillance
These products contain light sources of energy efficiency as detailed below.
REA1340-LS: Class D
REA1840-LS Class D
Using a screwdriver prise open housing remove diffuser
Disconnect switch from driver using a soldering iron (SCG)
Remove diffuser and remove LED PCB (LS)
Information for the Product user
- Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with crossed-out wheelie bin symbol).
- Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection centre for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
- This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is separated from normal household waste and recycled in the WEEE chain
- The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be disposed of according to local WEEE regulations
The Installation must be carried out by a qualified electrician
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>