POWERSMITH PWL124S 2400 Lumen Led Work Light User Manual
- June 6, 2024
- POWERSMITH
Table of Contents
POWERSMITH PWL124S 2400 Lumen Led Work Light User Manual
WARNING: To reduce the risk of injury, user must read and understand this operator’s manual before operating this product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.
CAUTION: RISK OF ELECTRIC SHOCK, Do not use with
extension cord near
water or where water may accumulate. Keep work light at least 16 feet from
pools and spas. Keep plugs and receptacles dry. Use only three wire outdoor
extension cords with grounded plugs and grounded receptacles.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PERSONAL INJURY.
- Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for wet location work light. Receptacles are available having the built-in GFCI protection and are able to be used for this measure of safety.
- Use only with an extension cord for outdoor use , such as an extension cord of cord type: SW, SW-A, SOW, SOW-A, STW, STW-A, STOW, STOW-A, SJW, SJW-A, SJOW, SJOW-A, SJTW, SJTW-A, or SJTOW, SJTOW-A.
- Do not look directly at the lighted lamps to avoid eye injuries.
- Always keep the work light away from any flammable surface or materials.
- Always check damaged or worn-out parts before using the work light. Broken parts will affect the work light operation. Replace or repair damaged or worn parts immediately. If repairs are needed, consult a professional electrician.
- Do not use a pressure washer to clean this product.
- Do not modify the work light in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the product. There are specific applications for which the work light was designed.
- Store work light in a secure place out of the reach of children. Inspect it for good working condition prior to storage and before re-use
SAVE THESE INSTRUCTIONS
SPECIFICATIONS
- Model : PWL124S
- Rated Power :120V~, 60Hz, 23W
- Brightness: 2400 Lumens
- Color Temperature: 5000K Bright White
- Cord Length: 5 ft.
- Net Weight: 2.1 lb
KNOWING YOUR WORK LIGHT
FiG 1
- Carrying Handle
- Work Light Head
- U-Shaped Bracket
- Lens
- Side Locking Knobs
- Locking Knob
- On/Off Switch
- Power Cord
- Stand
UNPACKING AND CONTENT
IMPORTANT! Due to modern mass production techniques, it is unlikely the
product is
faulty or that a part is missing. If you find anything wrong, do not operate
the product until the parts have been replaced or the fault has been
rectified. Failure to do so could result in serious personal injury.
CONTENTS IN PACKAGE
Description
| QTY
---|---
Work Light Head|
1
Metal Stand
| 1
Operator’s Manual|
1
ASSEMBLY INSTRUCTION
ATTACHING WORK LIGHT HEAD TO STAND (FIG 1)
- Place the stand (9) on a flat surface.
- Position the U-Shaped bracket (3) of the work light head against the stand (9) as shown in FIG 1.
- Use the locking knob (6), flat washer and spring washer to secure the work light head on the stand.
OPERATION
ADJUSTING THE LIGHT DIRECTION
Your work light can be tilted vertically up to 30° down or 90° up. To Adjust the Light Direction, loosen the side locking knobs (5). Adjust the work light head to desired position, and retighten knobs.
ON/OFF SWITCH
Your portable work light is equipped with an ON/OFF switch (7) locate on the back side of the work light. Press the switch once to turn the work light on and press the switch a second time to turn it off. Always turn the work light off before unplugging.
MAINTENANCE
Your work light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive cleaner. Use the similar care for the stand and tripod.
WARNING: Always make sure the work light is unplugged
and completely cool before attempting to clean it.
WARRANTY
This product is warranted free from defects in material and workmanship for 2 (Two) years after date of purchase. This limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is covered by this warranty and it is not transferable. Prior to returning your product to store location of purchase, please call the Toll- Free Help Line for possible solutions.
ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 2 YEAR WARRANTY.
HELP LINE
For questions about this or any other PowerSmith™ product,
Please call Toll-Free:
888-552-8665
Or visit our website:
www.powersmithproducts.com
©Richpower Industries, Inc. All Rights reserved
Richpower Industries, Inc.
736 Hampton Road Williamston, SC 29697
Printed in China, on recycled paper
Richpower Industries, Inc.
736 Hampton Road Williamston, SC USA
www.richpowerinc.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>