POWERSMITH PWLS150H 15000 Lumen LED Work Light User Manual
- June 5, 2024
- POWERSMITH
Table of Contents
PWLS150H
15,000 LUMEN LED WORK LIGHT
Operator’s Manual
TOLL-FREE
HELP LINE:
888-552-8665
WWW.POWERSMITHPRODUCTS.COM
WARNING: To reduce the risk of injury, the user must read and understand
this operator’s manual before operating this product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL WARNINGS, CAUTIONS, AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.
CAUTION: RISK OF ELECTRIC SHOCK, Do not use with extension cord near
water or where water may accumulate. Keep work light at least 16 feet from
pools and spas. Keep plugs and receptacles dry. Use only three-wire outdoor
extension cords with grounded plugs and grounded receptacles.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY
- Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for this work light in a wet location. Receptacles are available having the built-in GFCI protection and are able to be used for this measure of safety.
- Use only with an extension cord for outdoor use, such as an extension cord of cord type: SW, SW-A, SOW, SOW-A, STW, STW-A, STOW, STOW-A, SJW, SJW-A, SJOW, SJOW-A, SJTW, SJTW-A, or SJTOW, SJTOW-A.
- Do not look directly at the lighted lamps to avoid eye injuries.
- Always keep the work light away from any flammable surface or materials.
- Always check damaged or worn-out parts before using the work light. Broken parts will affect the work light operation. Replace or repair damaged or worn parts immediately. If repairs are needed, consult a professional electrician.
- Do not use a pressure washer to clean this product.
- Do not modify the work light in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the product. There are specific applications for which the work light was designed.
- Store the work light in a secure place out of the reach of children. Inspect it for good working condition prior to storage and before re-use.
SAVE THESE INSTRUCTIONS
SPECIFICATIONS
Model …………………………. PWLS150H
Rated Power ………………… 120V~/60Hz, 135W
Brightness …………………… 7500 / 15,000 Lumens
Color Temperature ………… 5000K Bright White
CRI …………………………….. >80
Cord …………………………… 10 ft. 18/3 SJTW
Net Weight …………………… 6.32 lb
KNOWING YOUR WORK LIGHT
1. Carrying Handle
2. LEDs
3. U-Shaped Bracket
4. Lens
5. Side Locking Knobs| 6. Locking Knob
7. Rocker Switch
8. Power Cord
9. Stand
---|---
UNPACKING AND CONTENT
IMPORTANT! Due to modern mass production techniques, it is unlikely the
product is faulty or that a part is missing. If you find anything wrong, do
not operate the product until the parts have been replaced or the fault has
been rectified. Failure to do so could result in serious personal injury.
CONTENTS IN PACKAGE
| Description | QTY |
|---|---|
| Work Light Head | 1 |
| Metal Stand | 1 |
| Operator’s Manual | 1 |
ASSEMBLY INSTRUCTIONS
ATTACHING WORK LIGHT HEAD TO STAND
- Place the stand (9) on a flat surface.
- Position the U-shaped bracket (3) of the work light head against the stand (9) as shown in FIG 1.
- Use the locking knob (6), flat washer, and spring washer to secure the work light head on the stand.
OPERATION
ADJUSTING THE LIGHT DIRECTION
Your work light can be tilted vertically up to 30° down or 90° up.
To Adjust the Light Direction, loosen the side locking knobs (5). Adjust the
work light head to the desired position, and retighten knobs.
SWITCH ACTION
Your portable work light is equipped with a rocker switch (7) located on the
backside of the work light.
Press the switch on the left side marked “I” to turn on the work light at 7500
lumens. Press the switch on the right side marked “II” to turn on the work
light at 15,000 lumens. Turn off the work light by setting the switch in the
middle position “O”. See FIG 2. Always turn the work light off before
unplugging.
MAINTENANCE
Your work light requires very little care and maintenance. Simply clean the
lens regularly with a non-abrasive cleaner.
Use similar care for the stand.
WARNING: Always make sure the work light is unplugged and completely
cool before attempting to clean it.
WARRANTY
This product is warranted free from defects in material and workmanship for 5
(Five) years after the date of purchase. This limited warranty does not cover
normal wear and tear or damage from neglect or accident. The original
purchaser is covered by this warranty and it is not transferable. Prior to
returning your product to the store location of purchase, please calls the
Toll-Free Help Line for possible solutions.
ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 5-YEAR WARRANTY.
HELPLINE
For questions about this or any other PowerSmith™ product, Please call Toll-
Free: 888-552-8665.
Or visit our website:
www.powersmithproducts.com
©Richpower Industries, Inc. All Rights reserved
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697
Printed in China, on recycled paper
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC USA
www.richpowerinc.com
References
- Powersmith Products - Features, Performance, and Versatility
- Richpower Industries, Inc. - Products for Jobsite, Home, and Industry
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>