POWERSMITH PNLR300M 300 Lumen Rechargeable LED Neck Light Instruction Manual

POWERSMITH PNLR300M 300 Lumen Rechargeable LED Neck Light

PRODUCT OVERVIEW

1. Light
2. Neckband
3. Switch Button
4. Battery Power Indicator
5. Charging Port
6. Rubber Cover
7. Light Holder
8. Magnetic Base
9. Charging Cable

SPECIFICATIONS

• Model ……………………… ……..PNLR300M
• Brightness on Each Light ……150/75/30 Lumens
• Color Temperature …………….5000K Bright White
• Runtime …………………………..2/4/8 Hours
• Battery on Each Light ………..3.7V, 700mAh Lithium-Ion
• Recharge Time …………………2 Hours
• IP Rating ………………………….65
• Net Weight ……………………….0.4 lb

UNPACKING CONTENTS

Important! Due to modern mass production techniques, it is unlikely the product is faulty or that a part is missing. If you find anything wrong, do not operate the product until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.

contents in package

Description  Quantity

• Lights: 2
• Neckband: 1
• Dual USB-C Charging Cable: 1
• Manual: 1

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.

• Always unplug the charger/adaptor from the light and power source when not in use.
• Do not look directly at the lighted LEDs to avoid eye injuries.
• Always keep the work light away from any flammable surface or materials.
• Always check damaged or worn-out parts before using the work light. Broken parts will affect the work light operation. Replace or repair damaged or worn parts immediately. If repairs are needed, consult a professional electrician.
• Do not use a pressure washer to clean this product.
• Do not modify the work light in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the product. There are specific applications for which the work light was designed.
• Store work light in a secure place out of the reach of children. Inspect it for good working condition prior to storage and before re-use.

WARNING: This LED light is powered by a Lithium-ion battery. Lithium-ion batteries are small, compact, and ideal for providing long-lasting power to this product. However, they must be used and charged properly. Improper use can result in serious injury, fire, or death.

CAUTION: This product comes with a battery installed internally. Do not attempt to remove the battery from the product.

• Do not place this lithium-ion battery-powered product in fire or apply heat to it.
• Do not apply strong impact or shocks to this lithium-ion battery-powered product.
• Do not allow the lithium-ion battery to get wet.
• Do not leave this lithium-ion battery-powered product in the direct sunlight, or use or store it inside cars in hot weather. Doing so may cause the battery to generate heat, rupture, or ignite. Using the battery in this manner may also result in a loss of performance and a shortened battery life.
• NEVER THROW WATER ON A BURNING LITHIUM-ION BATTERY! If a lithium-ion battery does catch on fire, it will burn even more violently when contacted with water.
• Store the product at temperatures between 41°F and 77°F (5°C and 25°C).
• Properly dispose of all batteries at a recycling center or per local code. More information regarding battery disposal in U.S. and Canada is available at
•  http://www.rbrc.org/index.html, or by calling 1-800-822-8837 (1-800-8BATTER).

OPERATION

This product comes with one neckband (2-FIG1) and two rechargeable lights (1-FIG 1). The included lights can be attached to the neckband by connecting the magnetic bases (8-FIG1) on the lights to the neckband. See FIG 1.

CHARGING THE LIGHTS

The two rechargeable lights can be charged at the same time by using the included dual USB-C charging cable.

1. Make sure the lights are turned off.

2. Lift the rubber cover (6-FIG 1) on each light to access the charging port (5-FIG 1).

3. Connect the USB end of the charging cable to a standard
   5V USB power output.

4. The charging cable has two USB-C ends to charge both lights at the same time. Connect one to the charging port on each light.
   NOTE: If only one light needs to be charged, just leave one USB-C end unconnected.

5. The battery power indicator (4-FIG 1) on each light will be flashing green while charging is in progress.

6. The indicator will turn to solid green when charging is complete.

Switch Button
Each light can operate independently. Press the switch button (3-FIG 1) to turn the light on. Additional presses cycle through the light settings in the following sequence. High – Medium – Low – Off If the light is left on any power setting for more than 7 seconds, the next press of the switch button will turn the light off.

BATTERY POWER INDICATOR
Each light has a battery power indicator (4-FIG 1). When turning on the light, the indicator will illuminate in three different colors. See the Batery Power Indicator Status Chart for details.

Battery Power Indicator Status Chart

Indicator Status battery power level

• Solid Green: 50%-100%
• Solid Amber: 15%-50%
• Solid Red: 10%-15%
• Flashing Red: Below 10%. It is time to charge the light

USING THE NECK LIGHT
The lightweight neck light can be worn on the neck and head. See FIG 2. The light heads swivel up to 70°, allowing light to be directed where needed. Each light can be detached from the neckband and operates independently as a flashlight.

MAINTENANCE

WARNING: Always make sure the light is unplugged and completely cool before attempting to clean it. Your light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive cleaner.

WARRANTY

This product is warranted free from defects in material and workmanship for 2 (TWO) years after date of purchase. This limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is covered by this warranty and it is not transferable. Prior to returning your product to store location of purchase, please call the Toll- Free Help Line for possible solutions.

HELP LINE

For questions about this or any other PowerSmith™ product, Please call Toll- Free: 888-552-8665. Or visit our website:  www.powersmithproducts.com ©Richpower Industries, Inc. All Rights reserved Richpower Industries, Inc. 736 Hampton Road Williamston, SC 29697 Printed in China, on recycled paper Richpower Industries, Inc.
736 Hampton Road Williamston, SC USA www.richpowerinc.com

References

• Call2Recycle | Leading the Charge For Battery Recycling
• Powersmith Products - Features, Performance, and Versatility
• Call2Recycle | Leading the Charge For Battery Recycling
• Richpower Industries, Inc. - Products for Jobsite, Home, and Industry

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>