POWERSMITH PWLS020H 2000 Lumen LED Work Light User Manual

: June 4, 2024
: POWERSMITH

Table of Contents

PRODUCT OVERVIEW
UNPACKING CONTENTS
UNPACKING CONTENTS
SPECIFICATIONS
IMPORTANT SAFETY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
OPERATION
Caution:
MAINTENANCE
WARRANTY
Documents / Resources

PWLS020H
2000 LUMEN LED WORK LIGHT
Operator’s Manual POWERSMITH PWLS020H 2000 Lumen LED Work
Light

TOLL-FREE HELPLINE:
888-552-8665 WWW.POWERSMITHPRODUCTS.COM
SAVE THIS MANUAL FOR FUTURE REFERENCE
The images are for illustration purposes only. The actual product may vary for different models POWERSMITH PWLS020H 2000 Lumen LED Work Light -
Figure

PRODUCT OVERVIEW

See FIG 1

1	Hook	6	LEDs
2	Bracket	7	Stand
3	Work Light Head	8	On/Off Switch
4	Lens	9	Power Cord
5	Side Locking Knob

UNPACKING CONTENTS

Important! Due to modern mass production techniques, it is unlikely the product is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.

UNPACKING CONTENTS

contents In packaGe

Description	Quantity
Light with Stand	1
Hook with Hardware	1
Manual	1

SPECIFICATIONS

Rated Power ………………………120 V~, 60Hz, 20W
Brightness …………………………2000 Lumens
Color Temperature ………………5000K Bright White
CRI …………………………………..>80
Cord …………………………………5 ft. 18/3 SJTW
Net Weight …………………………1.6 lb

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL WARNINGS, CAUTIONS, AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.
Warning: RISK OF ELECTRIC SHOCK, Do not use with an extension cord near water or where water may accumulate. Keep work light at least 16 feet from pools and spas. Keep plugs and receptacles dry. Use only three-wire outdoor extension cords with grounded plugs and grounded receptacles.

Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for this light in wet locations. Receptacles are available having the built-in GFCI protection and are able to be used for this measure of safety
Use only with an extension cord for outdoor use, such as an extension cord of cord type: SW, SW-A, SOW, SOW-A, STW, STW-A, STOW, STOW-A, SJW, SJW-A, SJOW, SJOW-A, SJTW, SJTW-A, or SJTOW, SJTOW-A.
Do not look directly at the lighted lamps to avoid eye injuries.
Always keep the work light away from any flammable surface or materials.
Always check damaged or worn-out parts before using the work light. Broken parts will affect the work light operation. Replace or repair damaged or worn parts immediately. If repairs are needed, consult a professional electrician
Do not use a pressure washer to clean this product.
Do not modify the work light in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the product. There are specific applications for which the work light was designed
Store work light in a secure place out of the reach of children. Inspect it for good working condition prior to storage and before re-use.
California Proposition 65 Warning This product can expose you to Lead and other chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Wash your hands after handling. For more information go to www.P65Warnings.ca.gov

ASSEMBLY INSTRUCTIONS

AttacHInG tHe Hook (FIG 2)
Attach the metal hook (1) to the bracket (2) using the bolt, washers and nut, as shown in FIG 2.

OPERATION

Caution:

Keep the metal parts of light away from any live power source.
Prior to installation and maintenance of the light, disconnect the light from the power source to prevent electric shock.
Installing and operating the light in harsh environments may shorten the lifespan and/or damage the light.
Keep the light away from any corrosive substance and only clean with a dry cloth and non-abrasive cleaner.
To ensure personal safety, make sure the light is mounted firmly and securely when installed in a high position.

TURNING THE LIGHT ON/OFF
Your work light is equipped with an ON/OFF switch (8-FIG 1) on the back side of the work light. Press the switch once to turn the work light on and press the switch a second ime to turn it off. Always turn the work light off before unplugging.

MAINTENANCE

Warning:
Always make sure the work light is unplugged and completely cool before attempting to clean it. Your work light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive cleaner. Use similar care for the stand.

WARRANTY

This product is warranted free from defects in material and workmanship for 5 (Five) years after the date of purchase. This limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is covered by this warranty and it is not transferable. Prior to returning your product to the store location of purchase, please call the Toll-Free Help Line for possible solutions.

HELPLINE
For questions about this or any other PowerSmith™ product,
Please call Toll-Free: 888-552-8665. Or visit our website: www.powersmithproducts.com
©Richpower Industries, Inc. all Rights Reserved
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697
Printed in China, on recycled paper

Richpower Industries, Inc.
736 Hampton Road
Williamston, SC USA
www.richpowerinc.com