POWERSMITH PWLS040H 4000 Lumen LED Work Light User Manual
- June 5, 2024
- POWERSMITH
Table of Contents
PWLS040H
4000 LUMEN LED WORK LIGHT
Operator’s Manual
TOLL-FREE HELPLINE:888-552-8665
SAVE THIS MANUAL FOR FUTURE REFERENCE
The images are for illustration purposes only. The actual product may vary
for different models.
PRODUCT OVERVIEW
See FIG 1
| 1. Hook | 6. LEDs |
|---|---|
| 2. Bracket | 7. Stand |
| 3. Work Light Head | 8. On/Off Switch |
| 4. Lens | 9. Power Cord |
| 5. Side Locking Knob |
UNPACKING CONTENTS
Important! Due to modern mass production techniques, it is unlikely the product is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.
Contents In package
| Description | Quantity |
|---|---|
| Light with Stand | 1 |
| Hook with Hardware | 1 |
| Manual | 1 |
SPECIFICATIONS
Rated Power ………………………120V~, 60Hz, 35W
Brightness …………………………4000 Lumens
Color Temperature ……………5000K Bright White
CRI …………………………………..>80
Cord …………………………………5 ft. 18/3 SJTW
Net Weight …………………………2.0 lb
IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL WARNINGS, CAUTIONS, AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.
Warning: RISK OF ELECTRIC SHOCK, Do not use an extension cord near water or where water may accumulate. Keep work light at least 16 feet from pools and spas. Keep plugs and receptacles dry. Use only three-wire outdoor extension cords with grounded plugs and grounded receptacles.
- Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for this light in wet locations. Receptacles are available having the built-in GFCI protection and are able to be used for this measure of safety.
- Use only with an extension cord for outdoor use , such as an extension cord of cord type: SW, SW-A, SOW, SOW-A, STW, STW-A, STOW, STOW-A, SJW, SJW-A, SJOW, SJOW-A, SJTW, SJTW-A, or SJTOW, SJTOW-A.
- Do not look directly at the lighted lamps to avoid eye injuries.
- Always keep the work light away from any flammable surface or materials.
- Always check damaged or worn-out parts before using the work light. Broken parts will affect the work light operation. Replace or repair damaged or worn parts immediately. If repairs are needed, consult a professional electrician.
- Do not use a pressure washer to clean this product.
- Do not modify the work light in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the product. There are specific applications for which the work light was designed.
- Store work light in a secure place out of the reach of children. Inspect it for good working condition prior to storage and before re-use.
California Proposition 65 Warning
This product can expose you to Lead and other chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash your hands after handling. For more information go to www.P65Warnings.ca.gov
ASSEMBLY INSTRUCTIONS
ATTACHING THE HOOK (FIG2)
Attach the metal hook (1) to the bracket (2) using the bolt, washers, and
nuts, as shown in FIG 2.
OPERATION
CAUTION:
- Keep the metal parts of light away from any live power source.
- Prior to installation and maintenance of the light, disconnect the light from the power source to prevent electric shock.
- Installing and operating the light in harsh environments may shorten the lifespan and/or damage the light.
- Keep the light away from any corrosive substance and only clean with a dry cloth and non-abrasive cleaner.
- To ensure personal safety, make sure the light is mounted firmly and securely when installed in a high position.
TURNING THE LIGHT ON/OFF
Your work light is equipped with an ON/OFF switch (8-FIG 1) on the backside the work light. Press the switch once to turn the work light on and press the switch a second time to turn it off. Always turn the work light off before unplugging.
MAINTENANCE
WARNING: Always make sure the work light is unplugged and completely cool
before attempting to clean it.
Your work light requires very little care and maintenance. Simply clean the
lens regularly with a non-abrasive cleaner. Use similar care for the stand.
WARRANTY
This product is warranted free from defects in material and workmanship for 5 (Five) years after the date of purchase. This limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is covered by this warranty and it is not transferable. Prior to returning your product to the store location of purchase, please call the Toll-Free Help Line for possible solutions.
HELPLINE
For questions about this or any other PowerSmith™ product,
Please call Toll-Free:
888-552-8665.
Or visit our website:
www.powersmithproducts.com
©Richpower Industries, Inc. all rights reserved
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697
Printed in China, on recycled paper.
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC USA
www.richpowerinc.com
References
- www.ca.gov | California State Portal
- P65Warnings.ca.gov
- Powersmith Products - Features, Performance, and Versatility
- Richpower Industries, Inc. - Products for Jobsite, Home, and Industry