POWERSMITH PTLK516-130 Temporary LED Work Light with Pivoting Panels User Manual
- June 6, 2024
- POWERSMITH
Table of Contents
POWERSMITH PTLK516-130 Temporary LED Work Light with Pivoting Panels User
Manual
IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.
CAUTION: RISK OF ELECTRIC SHOCK, Do not use with extension cord near water or where water may accumulate. Keep work light at least 16 feet from pools and spas. Keep plugs and receptacles dry. Use only three wire outdoor extension cords with grounded plugs and grounded receptacles.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY
- Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for this work light in wet locations. Receptacles are available having the built-in GFCI protection and are able to be used for this measure of safety.
- Use only with an extension cord for outdoor use, such as an extension cord of cord type: SW, SW-A, SOW, SOW-A, STW, STW-A, STOW, STOW-A, SJW, SJW-A, SJOW, SJOW-A, SJTW, SJTW-A, or SJTOW, SJTOW-A.
- Do not look directly at the lighted lamps to avoid eye injuries.
- Always keep the work light away from any flammable surface or materials.
- Always check damaged or worn-out parts before using the work light. Broken parts will affect the work light operation. Replace or repair damaged or worn parts immediately. If repairs are needed, consult a professional electrician.
- Do not use a pressure washer to clean this product.
- Do not modify the work light in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the product. There are specific applications for which the work light was designed.
- Store work light in a secure place out of the reach of children. Inspect it for good working condition prior to storage and before re-use.
SAVE THESE INSTRUCTIONS
SPECIFICATIONS
- Rated Power: 120V~, 60Hz, 130W
- Brightness: 16,000 Lumens
- Color Temperature: 5000K Bright White
- Beam Angle: 180° – 360°
- CRI : > 80
- Cord : 10 ft. ,18/3 SJTW, Linkable
- Daisy Chain Outlet Power Capacity: 720W
- Max. Chaining Units: 6
- Net Weight : 5 lb
KNOWING YOUR WORK LIGHT
OPERATION
CAUTION
- Keep the metal parts of light away from any live power source.
- Prior to installation and maintenance of the light, disconnect the light from the power source to prevent electric shock.
- Installing and operating the light in harsh environments may shorten the lifespan and/or damage the light.
- Keep the light away from any corrosive substance and only clean with dry cloth and nonabrasive cleaner.
- To ensure personal safety, make sure the light is mounted firmly and securely when installed in a high place.
MOUNTING THE LIGHT
WARNING: Check and make sure there is no sign of physical damage to the product when unpacking. Do not use damaged product.
Hanging the Light
Use a metal cable or hook (not included) to hang the light. See FIG 2.
Make sure the installation location and hanging cable are strong enough to
bear a minimum 66 lb of weight.
ADJUSTING LIGHT BEAM
The light has 4 light panels which pivot to adjust the light beam from 360° to
180°. See Figure 3.
DAISY-CHAIN POWER OUTLET
The light is equipped with a cable power outlet for daisy-chaining. Do not
overload the outlet. Refer to Specifications Section for outlet power
capacity.
TURNING ON/OFF THE LIGHT
The light has no switch. Plug into power outlet to turn on the light. Unplug to turn off the light.
MAINTENANCE
Your work light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive cleaner.
WARNING: Always make sure the work light is unplugged and completely cool before attempting to clean it.
WARRANTY
This product is warranted free from defects in material and workmanship for 5 (Five) years after date of purchase. This limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is covered by this warranty and it is not transferable. Prior to returning your product to store location of purchase, please call the Toll- Free Help Line for possible solutions.
HELP LINE
For questions about this or any other PowerSmith™ product,
Please call Toll-Free:
888-552-8665
Or visit our website:
www.powersmithproducts.com
©Richpower Industries, Inc. All Rights reserved
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697
Printed in China, on recycled paper
Toll-Free Help Line: 888-552-8665
The images are for illustration purpose only. Actual product may vary for different models
WARNING: To reduce the risk of injury, user must read and understand this operator’s manual before operating this product.
References
- Powersmith Products - Features, Performance, and Versatility
- Richpower Industries, Inc. - Products for Jobsite, Home, and Industry
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>