WINEGARD Extreme 2.0 WG02 Extender with Bridge Mode 2.4/5Ghz Instruction Manual
- June 6, 2024
- WINEGARD
Table of Contents
Extreme 2.0 WG02
Extender with Bridge Mode 2.4/5Ghz
Parts Included
Extreme 2.0 WG02
POE
L-Pipe
Both Feet
Insert
Hardware bags
Specifications
Dimensions: 9.35” Diameter, 8” Tall
Wireless Standard: Needed 802.11a/b/g/n/ac
Frequency Band: 2.4GHz/5GHz
Amplifiers: 3×3 MIMO
Antennas: (3) 2.4GHz/5GHz
Wireless Security: WEP,WPA, WPAA2, WPA mixed
Port: (1) RJ45 10/100/1000
Power Rating: Switching, AC Input 100-240V,1.5A
WARNINGS:
- Read this manual carefully and completely before attempting to assemble, install or operate this product. Winegard® recommends the installation of this equipment be done by a professional technician.
- Save these instructions.
- Do not paint any portion of the Winegard Connect® Home™. Painting the system could damage the system and will void the warranty.
- When first setting up the Winegard CONNECT HOME it is recommended to check for software updates the first time the system is connected to an internet signal.
It is also recommended to check for updates every couple of months for fixes and added features.
Disclaimer: Although every effort has been made to ensure that the information
in this manual is correct and complete, no company shall be held liable for
any errors or omissions in this manual. Information provided in this manual
was accurate at the time of printing. If the antenna does not function as
expected, please contact Winegard Co. Winegard is a registered trademark of
Winegard Company. LLC. Apple & the Apple logo are trademarks of Apple Inc.,
registered in the U.S. and other countries. App Store is a service mark of
Apple Inc., registered in the U.S. and other countries. Google Play & the
Google Play logo are trademarks of Google LLC. All trademarks, registered
trademarks and logos are the property of their respective owners and are not
affiliated with Winegard Company
Installation (Ethernet Cable not provided – MAX 100 feet)
DO NOT MOUNT OVER CHIMNEY OPENING
The CONNECT-HOME unit may be installed inside. Unit may not be installed
upside down. Improper installation will cause product damage.
- Determine the desired location of the CONNECT – HOME unit and install mount foot (Hardware not provided). Unobstructed placements will give you the best performance
- Attach to L-pipe by inserting one bolt with washer into the single hole of the insert through the end hole of the L-pipe. Finish by attaching with washer and nut and tighten using a 7/16” wrench.
- Align holes of insert assembly to the CONNECT-HOME unit and use plastic screws to fasten ( hand tightens with a Phillips screwdriver).
- Attach the L-pipe assembly to the mounting foot by inserting one bolt with a washer into the top single hole of the mounting foot through the top hole on the bottom of the L-pipe. Adjust the angle of the L-pipe assembly so the front of the Lippe is as close to vertical as possible. Once the desired angle is established, insert bolt with washer into the appropriate hole in mount foot through the bottom slot of the L-pipe. Finish attaching both bolts with washers and nuts and tighten using a 7/16” wrench.
- Side ethernet cable through the hole in the cover plate.
- Slide grommet over ethernet cable
- Insert grommet into the cover plate
- Plug the ethernet cable ends into the side of the CONNECT-HOME unit and makes sure you hear it click locking into place.
- Slide cover plate in place and attach using 2 plastite screws provided.
- Run ethernet cable to location of POE and plug into port marked POE. (The POE is INDOOR rated only, not intended for outside use. Good for use -4 degrees to 104 degrees) 11) Plug in the POE unit into an interior wall outlet.
Operation
Preferred connection method of product is through the Winegard Connected APP
IMPORTANT: DO NOT LOSE THIS MANUAL.
It contains your unique factory default SSID and password.
NOTE: Winegard recommends web browsers Microsoft Edge, Firefox, and
Google Chrome Browser
WiFi Extender
-
Turn on the WiFi-enabled device(s) that you want to connect and scan for wireless networks. It may take a few minutes for the network to appear.
-
The label located on the front of this manual lists the unique default SSID and password. Select this WiFi signal from the list of wireless networks and connect.
Once the correct SSID has been selected, enter the password. It is recommended to set your device(s) to automatically connect with the Winegard Connect Home. -
Once connected, open an internet browser type 10.11.12.1 into the address bar and press Enter. Figure 1. This will take you to the Admin Login screen. Figure 2.
Login using: Username: admin Password: admin. To connect to a WiFi network, go to Step
NOTE: The steps below can also be done on the WINEGARD CONNECTED App. -
To connect to a WiFi network, select WiFi and then click on SCAN FOR WiFi. Figure 3. This will bring up a list of all WiFi signals in range (this should take about one minute).
The Winegard Connect Home will display available networks by signal strength. Select the desired network and click
CONTINUE. -
Enter the network password, if prompted. Once the Winegard Connect Home connects to the internet, the INTERNET STATUS will show connected (this could take as long as two minutes). You are now ready to use the WiFi.
Operating Features
Change (SSID) Network Name
It is recommended that you change the name of your Extreme. This will improve
the security of your network and make it easier to find with your WiFi-enabled
devices.
Change Network Password
To secure your network, it is suggested that you change the network password
to something you can remember. The new password must be at least eight
characters long. You will need to log in using the new user name and password.
Forget and Saved Networks
If you want to forget the WiFi network that you are currently on click the
FORGET WIFI button. Figure 5. To view the list of saved networks. Click
the SAVED
WIFI
button. On this page, you will be able to prioritize your list of saved
networks, delete any or all saved networks and edit any saved networks. Figure
6. Most functions on the Winegard Connect Home are controlled from the Local
Network Settings screen. From the Status Screen, select LOCAL NETWORK
SETTINGS from the drop-down menu and click SELECT. From here (Figure7),
it is possible to do any of the following:
Security Type
The Winegard Connect Home Security Type has defaulted to WPA2-PSK (AES). Other
options are available on this screen
NOTE: Any changes made to your network settings may result in a temporary
loss of all network connections. You will need to reconnect all devices to the
Winegard Extreme with the changed network name and/or password.
WINEGARD PRODUCTS LIMITED WARRANTY (2 YEARS PARTS; 1 YEAR LABOR)
Winegard Company warrants this product against defects in materials or
workmanship for a period of two (2) years from the date of original purchase.
During year one (1) of such warranty, Winegard Company will also pay
authorized labor costs to an authorized Winegard dealer to repair or replace
defective products. No warranty claim will be honored unless, at the time the
claim is made, the Customer presents proof of purchase to an authorized
Winegard dealer (to locate the nearest authorized Winegard dealer, contact
Winegard Company, 3000 Kirkwood Street, Burlington, Iowa 52601,
Telephone 800-288-8094 or visit
www.winegard.com). The customer must provide proof
of purchase with a dated sales receipt for the Winegard product to verify the
product is under warranty. If the date of purchase cannot be verified, the
warranty period shall be considered to begin thirty (30) days after the date
of manufacture.
If a defect in material or workmanship is discovered, the Customer may take
the product to an authorized Winegard dealer for service. The customer must
provide proof of purchase to verify the product is under warranty. If the
product is brought to an authorized Winegard dealer for service prior to the
expiration of year one (1) of the warranty period and a defect in material or
workmanship is verified by Winegard Technical Services, Winegard Company will
cover the Winegard dealer’s labor charges for warranty service. The Winegard
dealer must contact Winegard Technical Services in advance for preapproval of
the service. Approval of the service is at the sole discretion of Winegard
Company.
Alternatively, the Customer may ship the product prepaid to Winegard Technical
Services (located at 2736 Mt. Pleasant Street, Burlington, Iowa 52601,
Telephone 800-788-4417). The customer
must return the product along with a brief description of the problem and
provide Winegard Technical Services with the Customer’s name, address, and
phone number. The customer must also provide proof of purchase to verify the
product is under warranty. If the product is returned before the expiration of
the warranty period, Winegard Company will (at its option) either repair or
replace the product.
This Limited Warranty does not apply if the product has been damaged,
deteriorates, malfunctions, or fails from improper installation, misuse,
abuse, neglect, accident, tampering, modification of the product was
originally manufactured by Winegard in any manner whatsoever, removing or
defacing any serial number, usage not in accordance with product instructions
or acts of nature such as damage caused by wind, lightning, ice or corrosive
environments such as salt spray and acid rain. This Limited Warranty also does
not apply if the product becomes unable to perform its’ intended function in
any way as a result of the television signal provider making any changes in
technology or service.
RETURN AUTHORIZATION POLICY
A Return Material Authorization (RMA) is required prior to returning any
product to Winegard Company or Winegard Warranty Services under this
warranty policy. Please call our Technical Services Department at
800-788-4417 or send an email to
warranty@winegard.com to obtain the RMA number.
Please furnish the date of purchase when requesting an RMA number. Enclose the
product in a prepaid package and write the RMA number in large, clear letters
on the outside of the package. To avoid confusion or misunderstanding, a
shipment(s) without an RMA number(s) or an unauthorized return(s) will be
refused and returned to Customer freight collect.
WINEGARD COMPANY DOES NOT ASSUME ANY LIABILITIES FOR ANY OTHER WARRANTIES,
EXPRESS OR IMPLIED, MADE BY ANY OTHER PERSON. ALL OTHER WARRANTIES WHETHER
EXPRESS, IMPLIED, OR STATUTORY INCLUDING WARRANTIES OF FITNESS FOR A
PARTICULAR PURPOSE AND MERCHANTABILITY ARE LIMITED TO THE TWO-YEAR PERIOD OF
THIS WARRANTY.
In states that do not allow limitations on implied warranties or the exclusion
or limitation of incidental or consequential damages, the above limitations or
exclusions do not apply.
Some states do not allow limitations on how long an implied warranty lasts or
the exclusion or limitation of incidental or consequential damages, so the
above limitations or exclusions may not apply to you.
This warranty gives the Customer specific legal rights. Customers may also
have other rights that may vary from state to state. WS-MOBWARREV3
Rev. 10/14
FCC STATEMENT This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is
encouraged to try to correct the interference by one or more of the following
methods:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and devices.
- Connect the equipment into an electrical outlet on a circuit different from that which the radio receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
Only channels 1–11 can be operated. Selection of other channels is not
possible.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body. This device
and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter except in accordance with FCC multi-transmitter
product procedures.
The device for operation in the band 5150-5250 MHz is only for in-home use.
Winegard Company • 2736 Mt. Pleasant Street • Burlington, IA 52601 •
1-800-288-8094 • Fax
319-754-0787
www.winegard.com • Printed in U.S.A. ©2018 Winegard
Company Rev3 4-20 2452414
IC Regulatory Compliance
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
RF Exposure Compliance
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 cm between the radiator and your body.
The device for operation in the band 5150-5250 MHz is only for indoor use.
FCC ID:C3D-AZ1333300
Winegard App
Connected
Logo/Info
here
Unit label
with
Password
Register your product at www.winegard.com/myantenna