FANTECH Aria XD7 Wireless RGB Gaming Mouse User Manual
- June 1, 2024
- fantech
Table of Contents
Aria XD7 Wireless RGB Gaming Mouse
User Manual ARIA XD7
PROWIRELESS RGB GAMING MOUSE
Aria XD7 Wireless RGB Gaming Mouse
What’s included in the box ®
- ARIA XD7
- Solid Rear Cover
- Type-C Charging Cable
- User manual
- Aria Stickers
- USB Wireless Receiver
- Wireless Extension Adapter
- 1 Set PTFE Mouse Skates
- 1 Set Anti-Slip Grips
System requirements®
- Operating systems: Windows XP/7/8/10; MAC OS
- USB 2.0/3.0 port
Instruction manual ©
Thank you for purchasing FANTECH ARIA XD7 Pro Wireless Gaming Mouse.
FANTECH ARIA XD? has 80 millions switch and also support on-board memory which
can save up to hundreds of different profiles.
FANTECH ARIA XD7 is a plug and play usb interface programmable mouse, no need
to install any driver for your thirst use. For more enhanced settings and
function. you can install the software from our website
www.fantechworld.com.
Technical specification ®
- Pixart 3395 Gaming Optical Sensor
- 1000Hz Polling Rate
- On-the-fly Adjustable DPI (800-26000)
- Up to 650IPS/50g acceleration
- Huano, 80 million clicks
- Battery capacity: 300mAh
- Battery life: Up to 40 hours
- Charging time: Approx 2 hours
- Size: 114mm”65mm”39mmM
- 1.8m Type-C paracord
- Weight: 59grt]
Size
Keys Function Map ©
KEY | KEY FUNCTION MAP |
---|---|
1 | LEFT BUTTON |
2 | MID BUTTON |
3 | RIGHT BUTTON |
4 | FORWARD |
5 | BACKWARD |
6 | BT PAIRING BUTTON |
7 | POWER SWITCH |
8 | DPI |
How to connect f
Its plug and play. Connect the mouse to computer by inserting USB receiver to your computer USB port.
How to use ©
Power switch
Easily switch the mouse to wired mode. 2.4Ghz mode. and BT 5.0 mode.
To connect to the BT mode, switch the switch button to BT mode, then hold the
»st« button until the scroll wheel blinks with a blue LED. Open your BT
settings and search for the “ARIA XD7″.
After connecting. the scroll wheel show a steady blue LED. Now you can get
your game on! Wired mode
To active wired mode. simply disconnect the wireless receiver, switch to wired
mode, and connect the USB cable to the mouse.
If the LED on the DPI blinks red color, this indicated low battery. Connect
the USB to charge the mouse.
Software ®
Key settings
- 6 Macros button assignment
- You can set up to 4 profile
- You can set debounce time from 0-30ms 6 Macros button assignment
Advanced settings
- 7 Stages DPI customization from S0-26000DPI.
- You can customize mouse sensitivity, scrolling speed, double – click speed on advanced setup.
- You can choose mouse LOD between Imm to 2mm
Macro setup
-
To create new macro, follow steps below:
- Press “New Macro” bar
- Input the “Macro Name”
- Click “Start recording” to start recording and click “Stop record” to stop recording. The macro key (Delay/cycle time can be edited/modified}
- After click “Stop record”, click “save” to save macro key.
+ To use the macro
- Select the designation button
- Select macro and choose the “MACRO NAME”
- Click “OK”
*Software only works in wired mode & 2.4Ghz mode.