Humane KT47 No Shock Dog Training Collar with Remote User Manual
- June 15, 2024
- Humane
Table of Contents
DOG TRAINING
COLLAR
MODEL KT47 MANUAL
COMPONENTS
OVERVIEW
Handheld Remote
Screen Receiver
CHARGING
Note:
Charge for more than 4 hours before first use. Thereafter, do not exceed 3
hours each time to avoid damaging the battery.
- Charge the Remote Charging status: The screen displays the power charging progress bar. Low Battery indication: The red light keeps flashing.
- Charge the Receiver
Charging status: The indicator shows red, fit turns from red to green, it
means charging is completed.
Low battery indication: The red light keeps flashing.
TURN ON/OFF THE REMOTE AND RECEIVER
Note:
The remote and receiver are already paired by default. If disconnected, re-
pair manually. Refer to Page 6 “MANUAL PAIRING” section.
Turn on/off the Remote
Note: Remember to turn
off the knob when not in use to extend the battery life.
Turn on/off the Receiver
Press the button to turn on the
receiver.
The receiver will emit a beep and vibrate signal,and the green indicator
flashes once.
Re-press the button to turn off the
receiver.
The receiver will emit a long beep signal.
Note: If there is no operation within 15 seconds, the receiver will
automatically enter sleep mode to save power. You only need to press any
button on the remote to wake it up.
Note: Remember to turn off the collar when not in use to extend the
battery life.
MAIN FEATURES
Beep Feature
Receiver delivers a beep signal to
your dog. (Fixed tone)
The beep icon on the screen flashes, and the indicators on the remote and
receiver light up green simultaneously.
Vibration Feature
Receiver delivers a vibrating
signal to your dog.( Adjustable vibrating intensity 1-16 levels)
The vibration icon on the screen flashes, and the indicators on the remote and
receiver light up green simultaneously.
Intensity Adjustment Rotate the knob to adjust the intensity from 1 to 16
levels.
Beep & Vibration Feature
The receiver delivers beep and
vibration signals to your dog at the same time.
The beep and vibration icons on the screen flash at the same time, and the
indicators on the remote and receiver light up green at the same time.
Intensity adjustment is consistent with the “Vibration Feature” section above.
This product works through a wireless signal. Only after successful pairing,
the remote and the receiver can work together. If the remote and receiver lose
contact due to interruption of the pairing signal, re-pair them manually.
Note: Please make sure the remote and receiver batteries are fully
charged.
- Turn on the remote and receiver.
- Press and hold the power button on the receiver for 3 seconds until the red and green lights flash alternately, which means indicating that the pairing state is entered.
- Press the beep and vibration buttons at the same time during the red and green lights flash alternately 5 times.
- When a long beep and vibration signal are emitted, pairingis complete.
- Test whether the pairing is successful: press any feature button on the remote, the receiver will send out a corresponding signal.
Test Beep & Vibration Function
Test Beep
Function 
Test Vibration Function
CHANGE CHANNEL
**Caution:
If you purchased one remote and one collar: channel 1 is locked by default to
prevent disconnection of the remote and receiver due to mis-touch the late
If you purchased one collar remote and two collars: channels are unlocked by
default. One remote can control 2 dogs at the same time by switching channel 1
and channel 2.
How to change the channel?
Press and hold the channel button on the left for 5 seconds until the numbers
“1” and “2” on the screen flash simultaneously, after 3 flashes you can press
the channel button again to select the channel.
Note: After you select a channel, the channel will not be locked and you
can switch channels at will.
NEXT
If you want to lock the channel, press and hold the channel button for 5
seconds untit the numbers “1” and “2” and the security lock on the screen
flash simultaneously, after 3 flashes the channel is locked.
MAIN FEATURES**
| Beep
---|---
| Beep & Vibration (1-16 levels)
| Rotary Knob
| 1600 ft Remote Range
| Magnetic Rechargeable Collar
| Dual Channel
| Lanyard
| Vibration (1-16 levels)
| Display Screen
| Safety Lock
| IPX7 Waterproof Receiver
| Rechargeable Remote (Type C charging port)
| Belt Clip
MAINTENANCE
Battery Maintenance
- Do not place the product in an high temperature environment ( over 60 °C )for long time, which may cause an explosion and result in a major security incident.
- When not in use, remenber place the product in a dry environment like other electronic devices.
- Charge regularly to avoid battery damage due to over-discharge if don’t used for a long time.
- Please unplug the power soon after a full charge, do not exceed 3 hours.
- Each charging time takes about 2 hours, but the first charge is at least 4hours.
- When the battery is damaged, please do not repair or disassemble it by yourself.
Tip: When not using the product, remember to manually turn off the remote and receiver.
COMLIANCE
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Modication or changes to this equipment not expressly approved
by Radio Systems Corporation may void the user s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a specic installation. If interference does occur to radio or
television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit dierent from that to which the receiver is connected.
- Consult customer care, the dealer, or an experienced radio/TV technician for help.”
CUSTOMER SERVICE
support_sodog@163.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>