BONELLI Reserve Multi Slide Doors Pivot Doors Owner’s Manual

: September 23, 2024
: BONELLI

Table of Contents

BONELLI Reserve Multi Slide Doors Pivot Doors
Specifications
FAQs
Features and Options
Glazing Performance Total Unit
Design Data
Special Sizes
Hardware Handle
Detailed Product Description
Dimension
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BONELLI Reserve Multi Slide Doors Pivot Doors

BONELLI-Reserve-Multi-Slide-Doors-Pivot0-Doors-PRODUCT

Specifications

Glazing Type: Dual-Pane Tempered Insulating Glass, Triple-Pane
Tempered Insulating Glass, Dual-Pane Laminated Insulating Glass
Insulated Glass Options/Low-E Types: Low-E 366, Low-E 366/i89, Low-E 270
Gas Fill: Argon, Air Filled (Only available on High Altitude Products)
Frame and Panels: Thermally Broken Aluminum
Finishes: Satin Anodized, Black Anodized
Hardware Finishes: Satin Nickel, Black

FAQs

Q: Can I use a different gas fill than the recommended ones?

A: It is not advised to use a gas fill other than Argon or Air Filled as specified, as it may affect the performance and safety of the product.

Q: How often should I clean the pivot doors?

A: Regularly clean the pivot doors using a mild detergent and water solution. Avoid using abrasive cleaners that can damage the finishes.

Document Navigation Tips:

Items listed in the table of contents above are active links that will take you to the corresponding page. The logo on each page is a link back to this table of contents. Bookmarks are also included in this PDF document and are available as an additional navigation option. The information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications are subject to change without notice. Consult your local sales representative for up-to-date product information.

Features and Options

Glazing
Glazing Type
Dual-Pane Tempered Insulating Glass
Triple-Pane Tempered Insulating Glass
Dual-pane laminated Insulating Glass
Insulate d Glas s Options/Low- E Types
Low-E 366
Low-E 366/i89
Low-E 270
Ga s Fill
Argon
Air Filled (Only available on High Altitude Products)
****Frame and Panels
Thermally Broken Aluminum
Finished s 1
Satin Anodized, Black Anodized
Hardware
Finishes 1
Satin Nickel, Black
Performance Data 2

Standard – Non-Impact Glazing
Meets or Exceeds AAMA / WDMA Ratings
Air Infiltration (cfm / ft2 of frame @ 1.57 psf wind pressure)
Water Resistance
Design Pressure
Other Performance Criteria

Forced Entry Resistance Level (Minimum Security Grade)3| —

(—) = Not Available

Contact your local sales representative for current designs and color options.
Maximum performance for single unit when glazed with the appropriate glass thickness.
The higher the level, the greater the product’s ability to resist forced entry. Valid only if a Manufacturer-supplied locking system is used.

NOTE : Performance with additional options may not be the same as Standard and Special size units. Please contact your local sales representative for complete information.

Glazing Performance Total Unit

Glazing Thickness

|

Type of Glazing

|

NFRC Certified

Product #

| Glass (mm)|

Gap Fill

| Performance Values 1| Shaded Areas Meet ENERGY STAR® Performance

Criteria in Zones Shown

---|---|---|---|---|---|---

Ext.

|

Int.

|

U-Factor

|

SHGC

|

VLT

|

CR

| U. S.| Canada 2
Zone| ER| Zone
Dual-Pane – Narrow Stiles| | | | | | | | | N| NC| SC| S| | CA
1″| 366/ clear| BNE-A-18-01577-00001| 5| 5| Argon| 0.36| 0.19| 0.41| 48| | | | | |
1″| 366/ i89| BNE-A-18-01597-00001| 5| 5| Argon| 0.33| 0.18| 0.40| 48| | | | | |
1″| 270/ clear| BNE-A-18-01569-00001| 5| 5| Argon| 0.36| 0.24| 0.44| 48| | | | | |
1″| 366/ clear| BNE-A-18-01575-00001| 5| 5| Air| 0.39| 0.19| 0.41| 48| | | | | |
1″| 366/ i89| BNE-A-18-01595-00001| 5| 5| Air| 0.35| 0.19| 0.40| 46| | | | | |
1″| 270/ clear| BNE-A-18-01567-00001| 5| 5| Air| 0.39| 0.25| 0.44| 48| | | | | |
Dual-Pane Laminated – Narrow Stiles| | | | | | | | | N| NC| SC| S| | CA
1-1/4″| 366/ clear| BNE-A-18-01625-00004| 5| 5| Argon| 0.37| 0.19| 0.40| 49| | | | | |
1-1/4″| 366/ i89| PENDING| 5| 5| Argon| | | | | | | | | |
1-1/4″| 270/ clear| BNE-A-18-01625-00002| 5| 5| Argon| 0.37| 0.24| 0.43| 49| | | | | |
1-1/4″| 366/ clear| BNE-A-18-01621-00004| 5| 5| Air| 0.40| 0.19| 0.40| 49| | | | | |
1-1/4″| 366/ i89| PENDING| 5| 5| Air| | | | | | | | | |
1-1/4″| 270/ clear| BNE-A-18-01621-00002| 5| 5| Air| 0.40| 0.24| 0.43| 49| | | | | |
Glazing Thickness|

Type of Glazing

|

NFRC Certified

Product #

| Glass (mm)|

Gap Fill

|

Performance Values 1

| Shaded Areas Meet ENERGY STAR® Performance

Criteria in Zones Shown

---|---|---|---|---|---|---

Ext.

|

Mid.

|

Int.

|

U-Factor

|

SHGC

|

VLT %

|

CR

| U. S.| Canada 2
Zone| ER| Zone
Triple-Pane Glazing – Narrow| | | | | | | | | | N| NC| SC| S| | CA
1-5/8″| 366/ clear/ 180| BNE-A-18-01665-00002| 5| 5| 5| Argon| 0.28| 0.17| 0.36| 51| | | SC| S| |
1-5/8″| 366/ 180/ i89| BNE-A-18-01685-00002| 5| 5| 5| Argon| 0.29| 0.17| 0.35| 50| | | | | |
1-5/8″| 270/ clear/ 180| BNE-A-18-01657-00002| 5| 5| 5| Argon| 0.29| 0.22| 0.39| 51| | | | | |
1-5/8″| 366/ clear/ 180| BNE-A-18-01663-00002| 5| 5| 5| Air| 0.31| 0.17| 0.36| 50| | | | | |
1-5/8″| 366/ 180/ i89| BNE-A-18-01683-00002| 5| 5| 5| Air| 0.31| 0.17| 0.35| 49| | | | | |
1-5/8″| 270/ clear/ 180| BNE-A-18-01655-00002| 5| 5| 5| Air| 0.31| 0.22| 0.39| 50| | | | | |

R-Value = 1/U-Factor
SHGC = Solar Heat Gain Coefficient
VLT % = Visible Light Transmission CR = Condensation Resistance
ER = Canadian Energy Rating

Glazing Thickness

|

Type of Glazing

|

NFRC Certified

Product #

| Glass (mm)|

Gap Fill

| Performance Values 1| Shaded Areas Meet ENERGY STAR® Performance

Criteria in Zones Shown

---|---|---|---|---|---|---

Ext.

|

Int.

|

U-Factor

|

SHGC

|

VLT

|

CR

| U. S.| Canada 2
Zone| ER| Zone
Dual-Pane – Wide Stiles| | | | | | | | | N| NC| SC| S| | CA
1″| 366/ clear| BNE-A-18-02617-00001| 5| 5| Argon| 0.38| 0.16| 0.35| 48| | | | | |
1″| 366/ i89| BNE-A-18-02637-00001| 5| 5| Argon| 0.35| 0.16| 0.34| 48| | | | | |
1″| 270/ clear| BNE-A-18-02609-00001| 5| 5| Argon| 0.39| 0.21| 0.38| 48| | | | | |
1″| 366/ clear| BNE-A-18-02615-00001| 5| 5| Air| 0.41| 0.17| 0.35| 48| | | | | |
1″| 366/ i89| BNE-A-18-02635-00001| 5| 5| Air| 0.37| 0.16| 0.34| 46| | | | | |
1″| 270/ clear| BNE-A-18-02607-00001| 5| 5| Air| 0.41| 0.21| 0.38| 48| | | | | |
Dual-Pane Laminated – Wide Stiles| | | | | | | | | N| NC| SC| S| | CA
1-1/4″| 366/ clear| BNE-A-18-02665-00004| 5| 5| Argon| 0.39| 0.16| 0.34| 49| | | | | |
1-1/4″| 366/ i89| PENDING| 5| 5| Argon| | | | | | | | | |
1-1/4″| 270/ clear| BNE-A-18-02665-00002| 5| 5| Argon| 0.39| 0.21| 0.37| 49| | | | | |
1-1/4″| 366/ clear| BNE-A-18-02661-00004| 5| 5| Air| 0.41| 0.16| 0.34| 48| | | | | |
1-1/4″| 366/ i89| PENDING| 5| 5| Air| | | | | | | | | |
1-1/4″| 270/ clear| BNE-A-18-02661-00002| 5| 5| Air| 0.41| 0.21| 0.37| 48| | | | | |
Glazing Thickness|

Type of Glazing

|

NFRC Certified

Product #

| Glass (mm)|

Gap Fill

|

Performance Values 1

| Shaded Areas Meet ENERGY STAR® Performance

Criteria in Zones Shown

---|---|---|---|---|---|---

Ext.

|

Mid.

|

Int.

|

U-Factor

|

SHGC

|

VLT %

|

CR

| U. S.| Canada 2
Zone| ER| Zone
Triple-Pane Glazing – Wide| | | | | | | | | | N| NC| SC| S| | CA
1-5/8″| 366/ clear/ 180| BNE-A-18-02705-00002| 5| 5| 5| Argon| 0.32| 0.15| 0.30| 50| | | | | |
1-5/8″| 366/ 180/ i89| BNE-A-18-02725-00002| 5| 5| 5| Argon| 0.33| 0.15| 0.30| 49| | | | | |
1-5/8″| 270/ clear/ 180| BNE-A-18-02717-00002| 5| 5| 5| Argon| 0.33| 0.19| 0.32| 49| | | | | |
1-5/8″| 366/ clear/ 180| BNE-A-18-02703-00002| 5| 5| 5| Air| 0.34| 0.15| 0.30| 50| | | | | |
1-5/8″| 366/ 180/ i89| BNE-A-18-02723-00002| 5| 5| 5| Air| 0.34| 0.15| 0.30| 49| | | | | |
1-5/8″| 270/ clear/ 180| BNE-A-18-02715-00002| 5| 5| 5| Air| 0.34| 0.19| 0.32| 49| | | | | |

R-Value = 1/U-Factor
SHGC = Solar Heat Gain Coefficient
VLT % = Visible Light Transmission CR = Condensation Resistance
ER = Canadian Energy Rating

Design Data

Pivot Doors Design Data

Unit

|

Actual Frame Size

Performance Class & Grade 2

| | Vent Area
Width (90°)|

Height

| |

Narrow Stile

|

Wide Stile

| Dual-Pane Glazing| Triple-Pane Glazing
3696| L / R| 35.5 x 95.5| 21.1| 93.9| 13.8| 15.4| 12.9| 5| 5| —
4896| L / R| 47.5 x 95.5| 33.1| 93.9| 21.6| 22.5| 19.8| 5| 5| —
6096| L / R| 59.5 x 95.5| 45.1| 93.9| 29.4| 29.6| 26.8| 5| 5| —
7296| L / R| 71.5 x 95.5| 57.1| 93.9| 37.2| 36.6| 33.7| 5| 5| —
36108| L / R| 35.5 x 107.5| 21.1| 105.9| 15.5| 17.6| 14.8| 5| 5| —
48108| L / R| 47.5 x 107.5| 33.1| 105.9| 24.3| 25.7| 22.7| 5| 5| —
60108| L / R| 59.5 x 107.5| 45.1| 105.9| 33.2| 33.7| 30.6| 5| 5| —
72108| L / R| 71.5 x 107.5| 57.1| 105.9| 42.0| 41.8| 38.5| 5| 5| —
36120| L / R| 35.5 x 119.5| 21.1| 117.9| 17.3| 19.8| 16.7| 5| 5| —
48120| L / R| 47.5 x 119.5| 33.1| 117.9| 27.1| 28.9| 25.6| 5| 5| —
60120| L / R| 59.5 x 119.5| 45.1| 117.9| 36.9| 37.9| 34.5| 5| 5| —
72120| L / R| 71.5 x 119.5| 57.1| 117.9| 46.7| 47.0| 43.4| 5| 5| —

Special Sizes

Frame Width	Frame Height
Minimum	Maximum
28″	71.5″

Hardware Handle

Hardware Handle

| Dimension from the bottom of the panel to the center of lock thumb turn
---|---
48″ Ladder Pull Bar| 36″
71″ Ladder Pull Bar| 36″

[48″] [71″] Ladder Pull Bar handle. Hardware finish is [Satin Nickel] [Matte Black].
Single deadbolt locking system.
Doors 8’0″ frame height and below will have one (1) roller catch below the deadbolt and one (1) roller catch above the deadbolt.
Doors over 8’0″ frame height up to and including 12’0″ will have an additional roller catch above the deadbolt.
Doors over 8’0″ frame height up to and including 10’0″ frame height will have one (1) roller catch centered on the pivot side.
Doors over 10’0″ frame height up to and including 12’0″ will have two (2) roller catches on the pivot side.
Roller catches to match the handle finish color
The key cylinder and thumb turn are located 36″ from the bottom of the panel to the center of the thumb turn. Available in [satin nickel][matte black] finishes.
A pivot point is 11.166″ from the edge of the frame. Pivot hardware to match the handle finish color.

(—) = Not Applicable

All dimensions are approximate to the nearest 1/16″.
Maximum performance when glazed with the appropriate glass thickness. All doors and sidelights are Tempered glass. To convert areas to square meters (m²), multiply square feet by 0.0929.

Detailed Product Description

Frame

Extruded aluminum head and jambs with thermal breaks.
Extruded aluminum low-profile sill with thermal breaks.
Frame Finish is [Satin Anodized] [Black Anodized].
Frame Depth 4-1/2″
Corners are secured with metal fasteners.

Door Panels

Extruded aluminum [Narrow Stiles/Rails] [Wide Stiles/Rails] with thermal breaks.
Corners are secured with metal fasteners.

Weatherstripping

Dual-durometer extruded polymer along perimeter of door jambs.
Extruded pile with quiet fin at top and sides of door panel. Silicone drop seal at door panel bottom.

Glazing System 1

Quality fully-tempered float glass complying with ASTM C 1048.
High-altitude glazing is available.
Silicone-glazed, 1” double-pane, dual-seal, insulating glass
[[366/Clear] [366/i89] [270/Clear] Low-E [with argon]]
Silicone-glazed, 1-1/4” double-pane, dual-seal, laminated, insulating glass.
[[366/Clear] [270/Clear] Low-E [with argon]]
Silicone-glazed, 1-5/8” triple-pane, dual-seal, insulating glass
[[366/Clear/180] [366/180/i89] [270/Clear/180] Low-E [with argon]]
1. Insulating glass with argon is Low-E coated. All other insulating glass is air-filled.
2. Contact your local sales representative for current color options.

Dimension

Dimension	Formula
Rough Opening Width	FW + .5″
Rough Opening Height	FH + .5″

Clear Opening (Approximate)

| FW – 14.4076″

(Pivot located 10″ from hinge jamb)

FH – 1.5978

Visible Glass Width

| Narrow Stiles: FW – 9.2864 Wide Stiles: FW – 13.025

Visible Glass Height

| Narrow Stiles: FH – 10.7191 Wide Stiles: FH – 12.5886

Unit Sections – Frame Types and Glazing Options

NARROW STILE

LARGE STILE $BONELLI-Reserve-Multi-Slide-Doors-Pivot0-Doors-fig $2$$

GLAZING OPTIONS $BONELLI-Reserve-Multi-Slide-Doors-Pivot0-Doors-fig $3$$

Scale 3″ = 1′ 0″
All dimensions are approximate.

Unit Sections – In-Swing, Narrow-Stile, Dual-Pane Glazing

$BONELLI-Reserve-Multi-Slide-Doors-Pivot0-Doors-fig $4$$ $BONELLI-Reserve-Multi-Slide-Doors-Pivot0 -Doors-fig $5$$

Scale 3″ = 1′ 0″

All dimensions are approximate. $BONELLI-Reserve-Multi-Slide-Doors-Pivot0 -Doors-fig $6$$ $BONELLI-Reserve-Multi- Slide-Doors-Pivot0-Doors-fig $7$$

Scale 3″ = 1′ 0″

All dimensions are approximate.

Unit Sections – In-Swing, Wide-Stile, Dual-Pane Glazing

$BONELLI-Reserve-Multi-Slide-Doors-Pivot0-Doors-fig $8$$ $BONELLI-Reserve-Multi-Slide-Doors-Pivot0 -Doors-fig $9$$

Scale 3″ = 1′ 0″

All dimensions are approximate. $BONELLI-Reserve-Multi-Slide-Doors-Pivot0 -Doors-fig $10$$ $BONELLI-Reserve-Multi- Slide-Doors-Pivot0-Doors-fig $11$$

Unit Sections – Out-Swing, Narrow-Stile, Dual-Pane Glazing

$BONELLI-Reserve-Multi-Slide-Doors-Pivot0-Doors-fig $12$$ $BONELLI-Reserve-Multi-Slide-Doors-Pivot0 -Doors-fig $13$$

Scale 3″ = 1′ 0″

All dimensions are approximate. $BONELLI-Reserve-Multi-Slide-Doors-Pivot0 -Doors-fig $14$$ $BONELLI-Reserve-Multi- Slide-Doors-Pivot0-Doors-fig $15$$

Unit Sections – Out-Swing, Wide-Stile, Dual-Pane Glazing

$BONELLI-Reserve-Multi-Slide-Doors-Pivot0-Doors-fig $16$$ $BONELLI-Reserve-Multi-Slide-Doors-Pivot0 -Doors-fig $17$$

Scale 3″ = 1′ 0″

All dimensions are approximate. $BONELLI-Reserve-Multi-Slide-Doors-Pivot0 -Doors-fig $18$$ $BONELLI-Reserve-Multi- Slide-Doors-Pivot0-Doors-fig $19$$

MORE INFO

Bonelli 2024 Architectural Design Manual
Division 08 – Openings
Windows and Doors
www.bonelli.com
- Glazing performance values are calculated based on NFRC 100, NFRC 200, and NFRC 500. ENERGY STAR® values are updated to 2023 (version 7) criteria.
- The values shown are based on Canada’s updated ENERGY STAR® 2020 initiative.
Visit www.energystar.gov for Energy Star guidelines.