Beldray Handheld Light Weight and Garment Cleaner Instruction Manual
- June 6, 2024
- Beldray
Table of Contents
Our handheld,
lightweight & **convenient
garment cleaner**
HANDHELD
GARMENT STEAMER
INSTRUCTION MANUAL
Please retain instructions for future reference.
Safety Instructions
When using electrical appliances, basic safety precautions should always be
followed.
Check that the voltage indicated on the rating plate corresponds with that of
the local network before connecting the appliance to the main power supply.
Children aged from 8 years and people with reduced physical, sensory or mental
capabilities or lack of experience and knowledge can use this appliance, only
if they have been given supervision or instruction concerning the use of the
appliance in a safe way and understand the hazards involved.
Children should be supervised to ensure that they do not play with the
appliance.
Unless they are older than 8 and supervised, children should not perform
cleaning or user maintenance.
If the power supply cord, plug, or any part of the appliance is malfunctioning
or if it has been dropped or damaged, cease using the product immediately to
avoid potential injury.
This appliance contains no user-serviceable parts, only a qualified
electrician should carry out repairs. Improper repairs may place the user at
risk of harm.
Keep the appliance out of the reach of children when it is switched on or
cooling down.
Do not leave the appliance unattended whilst connected to the main power
supply.
Do not remove the appliance from the mains power supply by pulling the cord;
switch it off and remove the plug by hand.
Do not pull or carry the appliance by its power supply cord.
Do not use the appliance for anything other than its intended use.
Do not use any parts/accessories other than those supplied with this
appliance.
Do not direct steam at people or animals or towards equipment containing
electrical components, such as the interior of ovens.
Never add aromatic, alcoholic, or detergent products into the appliance, as
this may damage the appliance or make it unsafe for use.
Switch off the appliance and disconnect it from the mains power supply before
changing or fitting accessories.
Always unplug the appliance after use and allow it to cool fully before any
cleaning or maintenance.
Use of an extension cord with the appliance is not recommended.
This appliance should not be operated by means of an external timer or
separate remote control system.
This appliance is intended for domestic use only. It should not be used for
commercial purposes.
CAUTION: The appliance emits very hot steam; always exercise extreme
caution during use.
Hot surface – do not touch the hot section or heating components of the
appliance.
WARNING: Danger of scalding. Keep the appliance away from flammable
materials.
Dos and Don’ts
Do:
Always hold the garment steamer by the handle.
Exercise caution when using the garment steamer, as the surface and steam head
will get very hot.
Always follow the garment manufacturer’s care instructions.
Allow the garment steamer to cool before removing or attaching the fabric
brush.
Don’t:
Direct steam at people or animals.
Tip or tilt the garment steamer once it has been filled with water, as this
will cause boiling water to leak from the steam head and could cause serious
injury.
Hold the garment steamer by the body or steam head.
Position the garment steamer too close to the surface of the fabric or apply
too much pressure, as this could cause damage to the fabric.
Refill the water tank whilst the garment steamer is switched on and plugged
into the main power supply.
Fill the water tank above the 100 ml max. fill mark.
Care and Maintenance
Before attempting any cleaning or maintenance, always unplug the garment
steamer from the mains power supply and allow it to cool sufficiently (for
approx. 30 minutes).
Drain any remaining water from the water tank once the garment steamer’s main
body has cooled.
Wipe the garment steamer with a soft, damp cloth and allow to dry thoroughly.
Clean the accessories in warm, soapy water; rinse and dry thoroughly.
The garment steamer and its accessories are not suitable for dishwasher use.
Do not use harsh or abrasive cleaners or detergents.
Never immerse the garment steamer in water or any other liquid.
Descaling the Water Tank and Accessories
If calcium deposits begin to build upon the steam head, this may be due to
living in a hard water area.
It is recommended to use demineralized water with the garment steamer if
living in a hard water area.
Description of Parts
- Handheld Garment Steamer
- Steam head
- Power switch
- Indicator light
- Water tank
- Handle
- Measuring cup
- Fabric brush
Instructions for Use
Before First Use
Clean the exterior surface of the garment steamer with a soft, damp cloth and
dry thoroughly before switching it on and using it for the first time.
Do not immerse the garment steamer in water or any other liquid.
Allow the unit to steam for 3-4 minutes to remove any impurities that may have
been left behind during production.
It is recommended to steam an old piece of cotton prior to steaming the
preferred garment, to check that any impurities have been removed.
NOTE: When using the garment steamer for the first time, a slight odor may be emitted. This is normal and will soon subside. Allow for sufficient ventilation around the garment steamer when it is in use.
Assembling the Handheld Garment Steamer
The garment steamer comes preassembled. If disassembled, check that the
garment steamer is switched off and unplugged from the main power supply
before refitting any accessories.
STEP 1 : Fix the steam head by rotating it to the ‘locked’ position.
STEP 2 : If required, attach the fabric brush to the steam head and click
it into place.
The fabric brush opens the weaves of the fabric for deeper steam diffusion. It
is ideal for steaming heavier fabrics and bulkier items such as car
upholstery, curtains, beddings, and sofas.
CAUTION: Always check that the garment steamer has cooled fully before adding or removing any attachment from the steam head.
Using the Handheld Garment Steamer
STEP 1 : Check that the garment steamer is switched off and unplugged
from the mains power supply, and make sure it is cool.
STEP 2 : Remove the steam head by rotating it to the unlocked position
and pulling it away from the garment steamer’s main body.
STEP 3 : Using the measuring cup, fill the water tank with a maximum of
100 ml water, using the max. fill mark as a guide.
STEP 4: Fix the steam head to the garment steamer main body and secure
the fabric brush if required, following the instructions in the section
entitled ‘Assembling the Handheld Garment Steamer’.
STEP 5: Place the garment steamer onto a flat, stable surface, then
plugin and switch it on at the mains power supply.
STEP 6 : Turn on the garment steamer by switching the power switch to the
‘On’ position. Once the water in the water tank has reached a rolling boil,
the steam head will begin to emit steam.
STEP 7: If necessary, hang the garment to be steamed. Press the steam
head gently against the fabric and carefully steam the garment using long,
straight downwards movements to remove any wrinkles or creases.
STEP 8: Once the garment has been steamed, switch off the garment steamer
by switching the power switch to the ‘Off’ position. Switch off and unplug it
from the mains power supply.
NOTE: A full water tank provides approx. 6 minutes of continuous steam. The indicator light will switch off to indicate that the water tank is empty. Once empty, allow the garment steamer to cool fully before refilling the water tank following steps 1-4.
CAUTION: During operation, the garment steamer and water tank in
particular will get very hot. Exercise extreme caution. Do not hold the
garment steamer by any other part of the unit except the handle.
Do not fill the water tank past the 100 ml max. fill mark, as this could cause
boiling water to be emitted from the steam head.
Do not use anything other than water to fill the water tank.
After the garment steamer has been switched off, steam may still be produced
whilst the garment steamer is cooling.
WARNING: Do not tip or tilt the garment steamer once it has been filled
with water, as this will cause boiling water to leak from the steam head and
could cause injury. Only refill the water tank once the garment steamer has
fully cooled.
Storage
Before storing in a cool, dry place, check that the garment steamer and
accessories are cool, clean, and dry.
The water tank should be empty before storage.
Never wrap the cord tightly around the garment steamer; wrap it loosely to
avoid causing damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|
The garment steamer is not heating up. The indicator light is not
illuminating.| The garment steamer is not plugged into the main power supply.
The power switch is in the ‘Off’ position.| Plugin and switch on the garment
steamer at the main power supply. Switch on the garment steamer by switching
the power switch to the ‘On’ position.
No steam is being emitted from the garment steamer.| There is insufficient
water remaining in the water tank. The water has not reached the required
temperature.|
Fill the water tank sufficiently.
Switch on the garment steamer by switching the power switch to the ‘On’
position and allow the water tank to preheat sufficiently. This should take
approx. 1 minute.
Specifications
Product code: BEL0725TON-150
Input: AC 220-240 V- 50-60 Hz
Output: 600 W
Water tank capacity: 100 ml
UP Global Sourcing UK Ltd.,
The UK. Manchester OL9 ODD.
Germany. 51149 K~ln.
If this product does not reach you in an acceptable condition please contact
our Customer Services Department at www.beldray.com
Please have your delivery note to hand as details from it will be required.
If you wish to return this product please return it to the retailer from where
it was purchased with your receipt (subject to their terms and conditions).
Guarantee
All products purchased as new carry a manufacturer’s guarantee; the time
period of the guarantee will vary dependent upon the product. Where reasonable
proof of purchase can be provided, Beldray will provide a standard 12-month
guarantee with the retailer from the date of purchase. This is only applicable
when products have been used as instructed for their intended, domestic use.
Any misuse or dismantling of products will invalidate any guarantee.
Under the guarantee, we undertake to repair or replace free of any charge any
parts found to be defective. In the event that we cannot provide an exact
replacement, a similar product will be offered or the cost refunded. Any
damages from daily wear and tear are not covered by this guarantee, nor are
consumables such as plugs, fuses, etc. Please note that the above terms and
conditions may be updated from time to time and we, therefore, recommend that
you check these each time you revisit the website.
Nothing in this guarantee or in the instructions relating to this product
excludes, restricts, or otherwise affects your statutory rights.
The crossed-out wheelie bin symbol on this item indicates that this appliance needs to be disposed of in an environmentally friendly way when it becomes of no further use or has worn out. Contact your local authority for details of where to take the item for recycling.
3YEAR
GUARANTEE
To be eligible for the extended guarantee, go to
guarantee.upgs.com/beldray and register
your product within 30 days of purchase.
Find us on
Manufactured by:
UP Global Sourcing UK Ltd.,
The UK. Manchester OL9 ODD.
Germany. 51149 K6~ln.
www.beldray.com
©Beldray Trademark. All rights reserved.
CD300321 /MD031221 N1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>