Beldray 91R998VEY Cordless Lint Remover Instruction Manual
- June 6, 2024
- Beldray
Table of Contents
Our innovative, practical & stylish lint remover
CORDLESS
LINT REMOVER
INSTRUCTION MANUAL
www.beldray.com
Please retain instructions for future reference.
Safety Instructions
When using electrical appliances, basic safety precautions should always be
followed.
children aged from 8 years and people with reduced physical, sensory or mental
capabilities or lack of experience and knowledge can use this appliance, only
if they have been given supervision or instruction concerning the use of the
appliance in a safe way and understand the hazards involved.
Children should be supervised to ensure that they do not play with the
appliance.
This appliance is not a toy.
This appliance contains no user-serviceable parts. If the Micro USB charging
cable or any part of the appliance is malfunctioning or if it has been dropped
or damaged, do not use it. Only a qualified electrician should carry out
repairs. Improper repairs may place the user at risk of harm.
Unless they are older than 8 and supervised, children should not perform
cleaning or user maintenance.
Keep the appliance and Micro USB charging cable out of the reach of children.
Do not fit or use any parts/accessories other than the parts supplied with
this appliance, as this may cause damage.
Do not immerse the appliance in water or any other liquid.
Do not operate the appliance with wet hands.
This appliance is for use on fabrics only; it should not be used on the skin.
Do not use the appliance for anything other than its intended use.
Do not store the appliance in direct sunlight or in high humidity conditions.
Do not leave the appliance unattended whilst connected to the main power
supply.
Do not touch any moving parts on this appliance during use as this could cause
injury.
Always unplug the appliance after use and before any cleaning or maintenance.
Always ensure that the appliance has cooled fully after use, before performing
any cleaning or maintenance or storing away.
This appliance is intended for domestic use only. It should not be used for
commercial purposes.
Battery Safety
The supply terminals are not to be short-circuited.
In the event of a battery and cell leaking, do not allow the liquid to come in
contact with the skin or eyes. If contact has been made, wash the affected
area with copious amounts of water and seek medical advice.
Do not use any cell or battery which is not designed for use with the product.
Secondary cells and batteries need to be charged before use. After extended
periods of storage, it may be necessary to charge and discharge the cells or
batteries several times to obtain maximum performance.
Keep batteries out of the reach of children.
Do not dispose of batteries in a fire.
Do not dismantle, open or shred secondary cells or batteries.
Do not expose cells or batteries to heat or fire.
Do not crush, puncture, dismantle or otherwise damage batteries.
Do not store above 60 °C.
Avoid storage in direct sunlight.
Do not subject batteries to mechanical shock.
Do not dispose of exhausted batteries in household waste.
Once the batteries have been exhausted, dispose of the unit at a local
recycling station. Contact the local government offices for further details.
This product is fitted with 2 x 1.2 V 600 mAh Ni-MH rechargeable batteries
(non-removable).
**Care and Maintenance
**
Always switch off and unplug the lint remover from the main power supply
before attempting any cleaning or maintenance.
STEP 1 : Wipe the lint remover with a soft, damp cloth and dry
thoroughly. Do not immerse the lint remover in water or any other liquid.
STEP 2 : Check that the blades are free from debris (e.g., hair), as this
could affect the performance of the lint remover. Note: The lint container
should be emptied and cleaned after each use.
Description of Parts
- Cordless Lint Remover main body
- Protection cap
- Blade cover
- Lint container
- Blades
- Power button
- Charging indicator light
- Micro USB charging port
- Micro USB charging cable
- Cleaning brush
**Charging the Cordless Lint Remover
**
Before first use, the lint remover must be charged for approx. 3-4 hours.
Subsequent charging times will take max. 8 hours, dependent on use.
STEP 1: Connect the micro USB end of the micro USB charging cable
(included) into the micro USB charging port on the lint remover.
STEP 2: Plug the USB end of the micro USB charging cable into a compatible USB
charging port; the charging indicator light will flash to indicate that the
battery is charging. Once the battery is fully charged. the charging indicator
light will stop flashing and remain illuminated.
Note: Whilst charging, the lint remover may become warm.
Caution: Exercise caution when charging the lint remover; it must be
stood upright on a dry, stable surface, away from other appliances.
Warning: Do not leave the lint remover unattended whilst it is charging.
If the battery is exhausted, the charging indicator light will flash when
attempting to turn on the lint remover.
It is recommended to charge the lint remover slightly before storage. This
will help to prolong the life of the battery.
Using the Cordless Lint Remover
STEP 1: Remove the protection cap and place the garment to be treated
onto a flat, even, and clean surface. Straighten the garment to minimize
creases.
STEP 2: Switch the lint remover on by pressing the power button.
STEP 3: Guide the lint remover over the garment using repeated, light,
circular movements across the surface of the fabric. STEP 4: Switch off the
lint remover by pressing the power button and replace the protective cap.
Note: The lint remover will switch off automatically when the blade cover
is unscrewed. Warning: To avoid damage to fabrics always uses the lint remover
on a flat surface.
Do not use the lint remover on buttons, embroidery, zips, loose threads, or
stitches. Do not apply too much pressure during use to avoid damaging fabric.
**Cleaning the Cordless Lint Remover
**
STEP 1: Remove the protection cap. Turn the lint container in an anticlockwise
direction and pull away from the lint remover main body. Empty any lint from
the container into a bin after each use.
STEP 2 : Remove the blade cover by unscrewing it in an anticlockwise
direction.
STEP 3: Carefully remove the blades; use the cleaning brush to scrape off
fluff and lint remnants.
STEP 4: Reattach the blades by pushing back onto the lint remover main
body until secure. Replace the blade cover by rotating in a clockwise
direction until secure.
STEP5: Attach the lint container by screwing it back onto the main unit
in a clockwise direction.
STEP 6: Replace the protection cap.
Warning: The blades are delicate and sharp, exercise care during the
cleaning. Keep fingers and hands away from the blades during cleaning and
maintenance.
Storage Check that the lint remover is cool, clean, and dry before
storing it in a cool, dry place.
Troubleshooting
Symptom
| Cause|
Solution
---|---|---
The lint remover will not turn on.| The lint remover has run out of charge
The lint container or blade cover is not secured correctly to the lint remover
main body.| Charge the lint remover following the instructions in the section
entitled ‘Charging the Cordless
Lint Remover’.
Reattach the lint container or blade cover to the lint remover main body by rotating in a clockwise direction until secure.
The lint remover is not removing lint from fabric.| Lint is wrapped around the blades.| Clean the blades following the instructions in the section entitled ‘Cleaning the Cordless Lint Remover’.
Specifications
Product code: 8E101034
Battery: 2 x 600 mAh Ni-MH rechargeable batteries (non-removable)
Working Voltage: 3 V
Charging Voltage: 5 V 1 A
UP Global Sourcing UK Ltd.,
UK. Manchester OL9 ODD.
Germany. 51149 Koln.
If this product does not reach you in an acceptable condition please contact
our Customer Services Department at www.beldray.com
Please have your delivery note to hand as details from it will be required.
If you wish to return this product please return it to the retailer from where
it was purchased with your receipt (subject to their terms and conditions).
**Guarantee
**
All products purchased as new carry a manufacturer’s guarantee; the time period of the guarantee will vary dependent upon the product. Where reasonable proof of purchase can be provided, Beldray will provide a standard 12-month guarantee with the retailer from the date of purchase. This is only applicable when products have been used as instructed for their intended, domestic use. Any misuse or dismantling of products will invalidate any guarantee.
Under the guarantee, we undertake to repair or replace free of any charge any parts found to be defective. In the event that we cannot provide an exact replacement, a similar product will be offered or the cost refunded. Any damages from daily wear and tear are not covered by this guarantee, nor are consumables such as plugs, fuses, etc.
Please note that the above terms and conditions may be updated from time to time and we, therefore, recommend that you check these each time you revisit the website.
Nothing in this guarantee or in the instructions relating to this product
excludes, restricts, or otherwise affects your statutory rights.
The crossed-out wheelie bin symbol on this item indicates the. this appliance
needs to be disposed of in an environmentally., friendly way when it becomes
of no further use or has worn c. Contact your local authority for details of
where to take the 1:i for recycling.*To be eligible for the extended guarantee, go to https://guarantee.upgs.com/beldray/ and register your product within 30 days of purchase Rechargeable batteries are not included in the extended manufacturer’s guarantee (after the first 12 months).
Find us on
www.facebook.com/Beledray
Manufactured by:
UP Global Sourcing UK Ltd.,
UK. Manchester OL9 ODD.
Germany. 51149 Koln.
www.beldray.com
Beldray Trademark. All rights reserved.
CO22.05210.10111021N1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>