SUPER BRIGHT LEDS SC SPI RGB/RGBW LED RF Controller User Manual

: June 6, 2024
: super bright leds

Table of Contents

SUPER BRIGHT LEDS SC SPI RGB/RGBW LED RF Controller
Features
Technical Parameters
Wiring Diagram
Use R9 remote set SPI digital LED strip
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SUPER BRIGHT LEDS SC SPI RGB/RGBW LED RF Controller

SUPER BRIGHT LEDS SC S0PI RGB/RGBW LED RF Controller
IMAGE

Features

● Mini-style multi-pixel RGB RF LED controller with SPI output, match with RF 2.4G RGB/RGBW remote control.
Compatible with 34 kinds digital IC RGB or RGBW LED strip, IC type and R/G/B order can be set.
Compatible ICs: TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, UCS2903, UCS2909, UCS2912, WS2811,WS2812, TM1829, TLS3001, TLS3002, GW6205, MBI6120, TM1814B, SK6812, UCS8904B, LPD6803, LPD1101, D705, UCS6909, UCS6912, LPD8803, LPD8806, WS2801, WS2803, P9813, SK9822, TM1914A,GS8206,GS8208.
32 kinds dynamic mode, include horse-race, chase, flow, trail or gradual change style.

Technical Parameters

Input and Output

Safety and EMC

EMC standard (EMC)

| EN55032:2015, EN61000-3-2:2014, EN61000-3-2:2013, EN55024 :2010/A1:2015

Safety standard(LVD)

| EN 61347-1:2015

EN 61347-2-11:2015

Certification| CE,EMC,LVD
Environment

Operation temperature| Ta: -30 OC ~ +55 OC
Case temperature (Max.)| T c:+65OC
IP rating| IP20
Warranty and Protection

Warranty| 5 years
Protection| Reverse Polarity
Weight

Net weight| 0.038kg
Gross weight| 0.049kg

Mechanical Structures and Installations

Wiring Diagram

SC connect with SPI spot light (TM1803)

SC connect with SPI pixel strip (LPD6803)

SC connect with SPI Digital light tube (TM1809)

Note:

If the SPI LED pixel strip is single-wire control, the DATA and CLK output is same, we can connect up to 2 LED strips.

Match Remote Control
Match:
Short press match key, immediately press on/off key of the remote.
Delete:
Press and hold match key for 5s to delete all match, The light blinks 5 times means all matched remotes were deleted.

Dynamic mode list

No.	Name	No.	Name	No.	Name
P01	Red horse race white ground	P12	Blue White chase	P23	Purple ﬂoat
P02	Green horse race white ground	P13	Green Cyan chase	P24	RGBW ﬂoat
P03	Blue horse race white ground	P14	RGB chase	P25	Red Yellow ﬂoat
P04	Yellow horse race blue ground	P15	7 color chase	P26	Green Cyan ﬂoat
P05	Cyan horse race blue ground	P16	Blue meteor	P27	Blue Purple ﬂoat
P06	Purple horse race blue ground	P17	Purple meteor	P28	Blue White ﬂoat
P07	7 color multi horse race	P18	White meteor	P29	6 color ﬂoat
P08	7 color horse race close + open	P19	7 color meteor	P30	6 color smooth

Compatible IC type

No.	IC type	Output signal
1	TM1803	DATA
2	TM1809,TM1804,TM1812,UCS1903,UCS1909,UCS1912,
UCS2903,UCS2909,UCS2912,WS2811,WS2812	DATA
3	TM1829	DATA
4	TLS3001,TLS3002	DATA
5	GW6205	DATA
6	MBI6120	DATA
7	TM1814B(RGBW)	DATA
8	SK6812(RGBW)	DATA
9	UCS8904B(RGBW)	DATA
10	LPD6803,LPD1101,D705,UCS6909,UCS6912	DATA,CLK
11	LPD8803,LPD8806	DATA,CLK
12	WS2801,WS2803	DATA,CLK
13	P9813	DATA,CLK
14	SK9822	DATA,CLK
15	TM1914A	DATA
16	GS8206,GS8208	DATA

Use R9 remote set SPI digital LED strip

Set LED strip length [Pixel number(8~1024)]. + 3 number + for example:
032, set pixel number to 32.
600, set pixel number to 600.
1024*, set pixel number to 1024.
Set LED strip chip type. + 2 number +
11：TM1803
12：TM1809,TM1804,TM1812,UCS1903,UCS1909,UCS1912,UCS2903,UCS2909,UCS2912,