Anker A2640 312 Charger User Manual

: June 12, 2024
: Anker

Table of Contents

Anker A2640 312 Charger
**Product Information
Product Usage Instructions
Compliance
Using Your Product
FCC Statement
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Anker A2640 312 Charger

Anker-A2640 312-Charger-product

**Product Information

**

The Anker 312 Charger is a 30W charger from the 3 SERIES product line by Anker Innovations Limited.

Product Usage Instructions

Before using the product, make sure to read all the instructions in the user manual.
Do not attempt to repair or modify the product yourself. In case of failure or component defect, contact authorized personnel or dispose of the product properly.
The charger has two USB-C ports (labeled as 01 and 02). Connect your devices using these ports.
This device complies with Part 15 of the FCC Rules. It may not cause harmful interference and must accept any interference received. Changes or modifications not approved by the responsible party could void the user’s authority to operate the equipment.
This digital apparatus complies with CAN ICES-003(B)/NMB003(B) standards.
The equipment should be connected to an outlet on a different circuit from the receiver’s circuit.
If you need assistance, consult the dealer or an experienced radio/TV technician. Fantasia Trading LLC is the responsible party for FCC matters.
For tutorial videos, FAQs, manuals, and more information, visit the Anker Support website or scan the QR code provided.

Contact Information

Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 (800) 988 7973

Compliance

This product complies with the following regulations:

Directive 2014/35/EU
Directive 2014/30/EU
Directive 2011/65/EU
Directive 2009/125/EC
Directive 2019/1782/EU
Electrical Equipment (Safety) Regulations 2016
Electromagnetic Compatibility Regulations 2016
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
The Ecodesign for Energy-Related Products Regulations 2010

Declaration of Conformity

The full text of the EU Declaration of Conformity can be found at: https://www.anker.com

GB Declaration of Conformity

The full text of the GB declaration of conformity can be found at: https://www.anker.com

Attention
Read all the instructions before using the product.

The product is designed for use with IT equipment only.
Naked flame sources, such as candles, must not be placed on the product.
The disconnection from line voltage is made by AC plug.
In case of broken plugs, the product must be disposed of.
If you want to clean the product, only use a dry cloth or brush.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).]

Using Your Product

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

This device may not cause harmful interference
this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.

The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC

Address : 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone : +1 (800) 988 7973

IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB- 003(B).

Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC & 2019/1782/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com.
GB Declaration of Conformity Hereby, Anker Innovations Limited declares that this product is in compliance with Electrical Equipment
(Safety) Regulations 2016 & Electromagnetic Compatibility Regulations 2016 & The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 & The Ecodesign for Energy-Related
Products Regulations 2010. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com.

Indoor use only

This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Anker Innovations Limited

Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok,
Kowloon, Hong Kong
The following importer is the responsible party (contract for EU and UK matters)
Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich, Germany
Anker Technology (UK) Limited | GNR8, 49 Clarendon Road,
Watford, Hertfordshire, WD17 1HP, United Kingdom

Specifications

Input 100-240V~0.9A, 50-60Hz
Output 5V 3A/9V 3A/12V 2.5A/15V 2A/20V 1.5A (30.0W Max)
Average Active Efficiency 83.24%
Efficiency at Low 74.03%
No-Load Power Consumption 0.02W
Recommended Operating Temperature 0-25℃ / 32-77 ℉

Note: To ensure electrical safety and product performance, the output power may fluctuate based on the ActiveShield safety mechanism when the ambient temperature is between 26-35℃ （78.8-95℉）with a high output load. ActiveShield™ enhances protection by intelligently monitoring temperature and adjusting power output to safeguard your connected devices.

Customer Service

24-month limited warranty

Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.

Lifetime technical support

support@anker.com
support.mea@anker.com (For Middle East and Africa Only)