ESR HaloLock Kickstand Wireless Charger User Manual
- June 6, 2024
- ESR
Table of Contents
ESR HaloLock Kickstand Wireless Charger
Before using this product, please read this manual carefully. Keep this manual for future reference.
Product Overview
Setup lnstructions
” This charger is equipped with a Halol ock magnetic ring. It will automatically align your iPhone 12 with the charged or easier wireless charging.
-
Adjust the kic:k.otta nd to a comfortable angle. Do not push the stand p;ist 60°.
-
Plug in the charger. Attach the charger to the phone to begin charging.
Important Reminders
- This charger is only compatible with the iPhone 12, 12 Pro, 12 mini, and 12 Pro Max.
- The rn.ixirnu rn o utput of this charger is 15W. Its maximum output for iPhones is 7.5W.
- Only use the cable provided with the charger. An Apple cable or other third-party cable may interfere with charging.
- This charger requires a charging adapter that supports QC or PDtast charging and an o utput of at least 18W.
- This charger will only attach to a caseless iPhone 12 series phone, official MagSafe cases, and ESR Halolock cases. It will not attach to any other phones or cases.
- This charger may leave a slight imprint or mark on the hack of a phone or case.
Using a magnetic case with the charger is recommended.
Safety Warnings
- Do not place the device in temperatures below 0°C (32°F) or above 60°C (140°F).
- Do not .itternptto disc:issernble the device, expose it to an open flame, or submerge it in water to avoid darnag ing the device.
- Always check for damage to the device, cables, or other accessories before using the device. If damaged, do not use the device.
- Do notattemptto d isassemble or modify the device in any way, as it may cause serious damage and void the warranty.
- Do not expose the device to extremely hot. humid, or corrosive environments to avoid damaging the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>