idinio ISSDW Smart Smoke Detector User Guide
- June 6, 2024
- idinio
Table of Contents
idinio ISSDW Smart Smoke Detector User Guide
Your tablet or smartphone must be connected to a 2.4Hz wifi network
Download Idinio App
Download the idinio smart app from the Google play or Apple store and create a user account.
This device only supports 2.4GHz WiFi networks so when you own a 5GHz router you must select the 2.4GHz network or disable I the 5GHz network first in your router’ menu. Refer to your router manual for instructions.
Make sure that during the pairing process this device as well as your iOS or Android device will remain I in the WiFi range of your router.
The smoke and heat detector is a device used to detect smoke and heat The device does not detect gas The device is suitable for indoor use only. If the device detects smoke or heat the alarm will sound and the LED indicator will flash red continuously until it is eliminated.
Product Overview
Mounting Bracket
Smart Smoke Detector
*2 screws and plugs**
*2 AA (LR6) batteries**
Product Specification
Power
Alkaline battery| 2* 15V AA (LR6) = 3V DC (Gold peak group GP15A LR6 or
energizer E91/ Raymaz-LR6)
System
Siren volume| 3 meter
Smoke alarm sound pattern| Repeating sequence of Bleep 05s – pause 05s- Bleep
0.5s – pause 0.5s – Bleep 05s- pause 1.5s with red LED flashing
Smoke alarm sound pattern| Repeating sequence of Bleep 0.2s – Pause 0.1s with
red LED flashing
Wifi|
Wireless frequency| 24 GHz
Wireless transmission| <450 mA
Wireless reach| 30 meter
Installation
Only start installation when you added the device to the idinio smart app successfully.
Product Safety
Battery
Use only the batteries mentioned in the manual.
Do not use old and new batteries together.
Do not use batteries of different types or brands.
Do not install batteries in reverse polarity.
Do not short-circuit or disassemble the batteries.
Do not expose the batteries to water.
Do not expose the batteries to fire or excessive heat. Batteries are prone to
leakage when fully discharged.
To avoid damage to the product, remove the batteries when leaving the product
unattended for longer periods of time. Replace the battery immediately when
the device gives a low-battery warning.
If liquid from the batteries comes into contact with skin or clothing,
immediately rinse with fresh water.
Warnings
Do not use the device outdoors.
Do not expose the device to water or moisture.
Install the device out of the reach of children. Install at least one device
at each floor level. Preferably install one device in each recommended area.
Do not install the device in bathrooms, toilets or other rooms where the
device can be triggered by steam or condensation. Install the device at least
3 meters away from these rooms.
Do not install the device in rooms where normal combustion occurs regularly.
Do not install the device in rooms with temperatures below 5 C or above 37 C.
Do not install the device in dusty or dirty environments.
Do not install the device near doors and windows.
Do not install the device near radiators or air vents in walls or ceilings.
Do not install the device behind curtains or furniture.
Do not use rechargeable batteries in order to prevent malfunctions.
Do not paint the device.
Lifetime
The device has a limited lifetime. Replace the device 10 years after the date of purchase. Write the purchase date on the manual for future reference.
Hush Function
If the alarm sounds falsely due to cooking, the alarm can be paused for 10 minutes by pressing the test button. The LED indicator will flash every 8 seconds. Locate the source of the alarm before using the hush function in order to make sure that it is not a life-threatening situation.
Testing the Alarm
The alarm must be tested weekly to ensure correct operation. If the alarm test fails, replace the smoke detector.
- Press and hold the test button for 5 seconds. The alarm will sound.
- Release the test button
Maintenance
Clean the outside of the device at least once a month.
Use a vacuum cleaner with brush nozzle to clean the outside of the device.
Device and LED indicator behavior
| Action | Reaction | |
|---|---|---|
| Daily operation | The red LED indicator will flash once every 40 seconds. | Not |
applicable
Smoke/heat detection| The siren will turn on and the red LED indicator will
flash continuously until the smoke or the heat is eliminated.| Eliminate the
smoke or the heat
Low battery warning| Every 40 seconds the siren will beep shortly and the red
LED indicator will flash.| Choose one of these action
- Replace the battery
- Press the test button to pause the alarm for 8 hours.
Defective| The siren will beep shortly every 40 seconds.| Replace the device
Add Device
Open the device and insert the batteries into the compartment. Then press the reset button 3 times within 2 seconds and the LED indicator will blink rapidly. If this is not the case then repeat this operation or remove the device from a previously paired account.
Launch the app and tap the ‘+’ in the top right corner.
Select ‘sensor and tap ‘smart wifi smoke detector’
Tap confirm indicator rapidly blinks.
Select the right 2.4 GHz Wifi network and password and tap Confirm.
The app auto-connect with the device. Once the process is completed. it prompt you to rename the device. Enter a new name and ‘Save)
Press Smart wifi smoke Detector icon for settings
Rename/ Share/ Delete device – Tao to Run and automation overview – Digital ID/P – address/ MAC – address information
Notification History
Battery status
Notification Setting : Product failure, Smoke/heat detection, muted, test
WARNING
Safety warning
Ensure you have fully read and understood the instructions in this document before you install or use the product following the installation/wire diagram (when applicable). Keep this document for future reference and only use the product as described in this document. Any other use of the product than described in this manual may damage the product or cause injury to the user (e.g. due to a short circuit, fire or electric shock). Disconnect the product from the power source if problems occur. Do not drop the product and avoid bumping. Do not use the product if a part is damaged or defective. Replace a damaged defective product immediately. When a non-standard consumer (power)installation is required this should be performed by a qualified technician to reduce the risk of an electric shock. Make sure the product is sufficiently ventilated during use. Never cover an electrical (LED) device during usage since it can generate heat causing damage. Besides LED can be extremely bright and may cause serious eye damage so don’t stare at it directly. When a product is meant for indoor and/or outdoor use only, this will be mentioned on the product/parts or in the manual. Keep the product out of reach of children or animals.
Cleaning and Maintenance warning
Do not use cleaning solvents or abrasives. Do not clean the inside of the device. Do not attempt to repair the device when the device does not operate correctly, replace it. Clean the outside of the device using a soft, damp cloth (don’t use microfiber cloth).
Support
If you need further help or have comments or suggestions please visit :
www.shada.nl/nl/contact
The item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land- fill and minimize any potential negative impact on human health and the environment.
This product carries the CE mark of certification, which confirms that this product meets EU safety, health and environmental protection requirements.
Hereby, Shada declares that the radio equipment type 140180 Smart WiFi Smoke Detector is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.shada.nl/downloads.
Lets meet online: www.shada.nl/idinio
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>