idinio 140103 Full HD WiFi Outdoor Pan-Tilt Camera User Guide

June 3, 2024
idinio

View Out 2 pan Tilt WiFi Camera
Quick Start Guide

140103 Full HD WiFi Outdoor Pan-Tilt Camera

Scan for product info. & manual

LET’S MEET ONLINE
https://www.shada.nl/idinio

  Your tablet or smartphone must be connected to a 2.4GHz WiFi network
EN II Download the Idinio Smart app from the Google Play or Apple App Store and create a user account

Idina app


https://itunes.apple.com/nl/app/idinio/id1457970650?mt=8| https://play.google.com/store/apps/details?id=com.smart.ledsgo

Basic netw ork requirements

This device only supports 2.4GHzirlFi networks so when you own a KHz router you must select the 2.404z network or disable the 5GHz network first in your route? menu. Refer to your router manual for instructions.

idinio 140103 Full HD WiFi Outdoor Pan-Tilt Camera - fig
1Make sure that during the pairing process this device as well as your iOS or Android device will remain in the WiFi range of your router.

Installation

idinio 140103 Full HD WiFi Outdoor Pan-Tilt Camera - fig
2

idinio 140103 Full HD WiFi Outdoor Pan-Tilt Camera - fig
3

Add device

 Power up the device. The camera will start to beep 2x repeatedly after a booting tune. If this is not the case you must reset the device by pressing the reset button for approximately S seconds.
Launch the app and tap the 1+1 in the top right corner
Select Camera and tap View Out 2 Pan Tilt WiFi Camera’
Tap Confirm indicator rapidly blinks’ when the camera beeps 2x repeatedly.
Select the right 2.4GHZ WiFi network and password and tap ‘Confirm’

Press continue to have the app generate a QR code that needs to be scanned by the camera Hold the OR code in front of the camera at 15-20cm.

Confirm that after scanning the QR code you heard a beep.

The app will auto-connect with the device. Once the process is completed, it will prompt you to rename i the device. Enter a new name and Save

idinio 140103 Full HD WiFi Outdoor Pan-Tilt Camera - fig
12

If adding the device failed, it may be a networking problem. You can now proceed using the AP Mode for adding the device.

Press the reset button for 1 second and make sure that the device lights are flashing slowly.
Tap the ‘+’ icon in the top right corner, then select Camera and tap ‘View Out 2 Pan Tilt WiFi Camera’

 Tap another mode in the top right corner and select ‘AP Mode.
Check if the connection light is flashing slowly. Press Confirm indicator slowly blinks. Then select your 2.4GHz network password and confirm.
Now connect your smartphone or tablet with the device’s hotspot. Tap ‘Connect. The app will now open the settings menu of your smartphone or tablet. Open WiFi settings.
Search the smart device name in the list of WiFi networks and connect. Devices will connect. Now open the Idinio Smart app again and wait until the connection process is finished.
Wait until the connection is successful.

Safety warning!

Ensure you have fully read and understood the instructions in this document before you install or use the product following the installation/wire diagram (when applicable). Keep this document for future reference and only use the product as described in this document Any other use of the product than described in this manual may damage the product or cause injury to the user (e.g. due to a short circuit fire or electric shock). Disconnect the product from the power source if problems occur. Do not drop the product and avoid bumping. Do not use the product if a part is damaged or defective. Replace a damaged defective product immediately. When a non-standard consumer (power)in- stal lation is required this should be performed by a qualified technician to reduce the risk of an electric shock Make sure the product is sufficiently ventilated during use. Never cover an electrical (LED) device during usage since it can generate heat causing damage. Besides LED can be extremely bright and may cause serious eye damage so don’t stare at it directly. When a product is meant for indoor and/or outdoor use only, this will be mentioned on the product/parts or in the manual. Keep the product out of reach of children or animal

Cleaning and Maintenance Warning!

Do not use cleaning solvents or abrasives & Do not clean the inside of the device. Do not attempt to repair the device when the device does not operate correctly. replace it Clean the outside of the device using a soft, damp cloth (don’t use microfiber cloth).

Support
If you need further help or have comments or suggestions please visit www.shada.nl/nIkontact

The item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land- fill and minimize any potential negative impact on human health and the environment.
This product carries the CE mark of certification, which confirms that this product meets EU safety, health, and environmental protection requirements.

Hereby, Shada declares that the radio equipment type 140103 View Out 2 Pan Tilt WiFi Camera is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://www.shading.nI/downloads.

D.O.C: http://shada.nl/p/140103 Art.Nr.: 140103

idinio 140103 Full HD WiFi Outdoor Pan-Tilt Camera - QR code
4
https://www.shada.nl/idinio
icon4
E1SHADA one
Molenmakershoek 28, NL-7328 JK APELDOORN – The Netherlands – www.shada.nl AT: 40133, ES: 7020

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals