infraworld 391093 Safir Complete Sauna Instruction Manual
- June 17, 2024
- Infraworld
Table of Contents
infraworld 391093 Safir Complete Sauna Instruction Manual
Assembly instructions
| Pos | Description | Qty |
|---|---|---|
| 1 | Wall 1 | 1 |
| 2 | Wall 2 | 1 |
| 3 | Wall 3 | 1 |
| 4 | Wall 4 | 1 |
| 5 | Wall 5 | 1 |
| 6 | Wall 6 | 1 |
| 7 | Wall 7 | 1 |
| 8 | Wall 8 | 1 |
| 9 | Wall 9 | 1 |
| 10 | Front frame | 3 |
| 1 11 | Floor cornice | 4 |
| I12 | Rear roof | 1 |
| I13 | Middle roof | 1 |
| 14 | Front roof | |
| 15 | Glass door | 1 |
| 16 | Lateral glass element | 1 |
| I17 | Alu-section | 1 |
| 18 | Corner post | 3 |
| 19 | Corner screen | 3 set |
| 20 | Roof cornice | 4 |
| 21 | Lateral battens | 3 |
| 22 | Roof battens | 4 |
| 23 | Roof battens outside | 2 |
| 24 | Bench batten with feet | 1 |
| 25 | Long bench battens | 1 |
| 26 | Short bench battens | 3 |
| 27 | Upper bench | 1 |
| 28 | Lower bench with side finish | 1 |
| 29 | Short bench | 1 |
| I30 | Interbank covering | 1 |
| 31 | Back rests | 3 |
| 32 | Heater protective grille | 1 set |
| 33 | Floor grating | 1 |
| 34 | Head rests | 2 |
| 35 | Lamp + cable | 1 |
| 36 | Glass shade | 1 |
| 37 | Assembly material | 1 |
| 38 | Assembly instructions | 1 |
Important before beginning to assemble
- The assembly instructions apply in general and can vary from version to version.
- Before starting to assemble check the packing list, if the product is complete and intact.
- Eventual complaints can be easily solved accordingly.
- We reserve the right to perform technical modifications for the purpose of further product development.
- A minimum room height of 215 cm is necessary.
- Distance to the wall must be at least 5cm.
- We recommend placing the cabin in a well ventilated, dry room.
- We recommend a tile or stone floor, which must be level and horizontal.
- Install the electric cables in the walls beforehand. Later it may be difficult.
- Pre-drill all screw connections.
The material wood and its characteristics
Wood is a naturally grown material. Healthy knots, small cracks due to the process of drying and minor discolorations are natural and characteristic properties and are not optical or constructive defects.
Due to the heating of the sauna more resin can come out onto the surface. Remove the resin residue with a scraper and fine sandpaper after the sauna has cooled down
Care instructions
The sauna should be cleaned regularly. To do so, use a damp cloth and no cleaning detergents. The wooden parts of the sauna must not be painted, lacquered or surface treated in any other way
Electric installations
Electric installations may only be carried out by an authorized electrician under observing the EVU and VDE regulations.
The assembly instructions and notes for the heater, control and sauna lamps are included in the respective packaging.
Terms of warranty and guarantee
The guarantee for the wooden construction, the finishing quality and the electric parts is 2 years and claims can only be made on presentation of the original invoice. Within the guarantee period defective parts will be replaced free of charge. The cost for labour and travel, resulting from the exchange, are not included.
Subject to technical modifications
© by TPI GmbH, Frankenburg, Aus